Page is loading ...
Production Specifications
Eaton DT364UWK
Catalog number: DT364UWK
Eaton Heavy duty double-throw non-fused safety switch, 200 A, NEMA 4X,
Stainless steel, Non-fusible, Three-pole, Three-wire, 600 Vac, 250 Vdc
General specifications
Eaton heavy duty double-throw non-
fused safety switch
DT364UWK
782113865621
11.65 in 41.02 in
19.16 in 105 lb
Eaton Selling Policy 25-000, one (1) year
from the date of installation of the
Product or eighteen (18) months from the
date of shipment of the Product,
whichever occurs first.
UL Listed
Suitable for service entrance use with a
neutral or ground lug kit installed
Product Name Catalog Number
UPC
Product Length/Depth Product Height
Product Width Product Weight
Warranty Certifications
Catalog Notes
Eaton Corporation plc
Eaton House
30 Pembroke Road
Dublin 4, Ireland
Eaton.com
© 2022 Eaton
All Rights Reserved
Eaton is a registered trademark.
All other trademarks are
property of their respective
owners.
Eaton.com/socialmedia
defaultTaxonomyAttributeLabel
Stainless steel
Heavy Duty, Double-Throw
Non-fusible
3
NEMA 4X
600 Vac, 250 Vdc
200A
Three-pole
Resources
Double-throw safety switch
Expanded double-throw safety switch line
Switching devices catalog
Eaton's Volume 2—Commercial Distribution
ARMS Enclosed Circuit Breaker
Double Up on Safety
Switching Devices Flex Center
Eaton Specification Sheet - DT364UWK
Enclosure material
Type
Fuse configuration
Number of wires
Enclosure
Voltage rating
Amperage Rating
Number Of Poles
Brochures
Catalogs
Multimedia
Specifications and datasheets
/