CANARMNA ICH2012B04BKG15 User manual

Brand: CANARMNA

Model: ICH2012B04BKG15

Type: User manual

CANARMNA ICH2012B04BKG15 is an elegant chandelier designed to elevate your living space. With its versatile design, it can be customized to suit your needs and preferences. The adjustable height and swivel feature allow you to position the light perfectly, creating a warm and inviting ambiance. The included instructions provide clear guidelines for safe installation, ensuring your peace of mind.

1. Remove the screws

from the sticks. Screw the 4

sticks onto the bottom

frame.

2. Insert the square tubes

over the sticks.

3. Install the top frame

by tightening the 4 screws.

ICH2012B04XXX15

05/22

CHANDELIER

Phillips

Screwdriver Wire Cutters

Pliers Wrench

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS

READ ALL INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Wiring supplies

as required by

local electrical

code

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE

HAZARDS INVOLVED.

3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND

WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A

CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

INSTALLATION:

SAFETY PRECAUTIONS:

TOOLS AND MATERIALS REQUIRED:

Stick

Square

tube

Screw

Top

Frame

Bottom

Frame

Stick

1-2

Tel: (613) 342-5424, Fax: (800) 263-4598

Sleeve

Rod

Swivel

Cover

Hex

Nut

Hex

Nut

Star

Washer

“B”

Studs

Electrical

Box

Electrical Box Screws

(not included)

Mounting

Bracket

Mounting

Bracket

Screw

10. Once connections of

wires are completed, carefully

tuck wires and wire nuts into the

electrical box making sure no

bare wire (on the black and

white) is visible at the wire nuts.

11. Position fixture over studs

on mounting bracket assembly.

Secure fixture in place with star

washers and cap nuts.

12. Install specified bulb type

and wattage (not included).

7. Loosen “B”. Adjust stud to

desired length and lock in place

with “B”. Mount the mounting

bracket to outlet box using

electrical box screws (not

included). Make sure the studs

on the mounting bracket are

facing out from the electrical

box.

8. Position mounting bracket

so that the fixture will be hung

properly once it is mounted to

the ceiling. Tighten the screw to

hold in place.

9. Connect the ground wires

(bare copper or green) from

your fixture to the ground wire

(bare copper or green) or

ground screw in the electrical

box. Connect the black wire (or

wire with marking) from the

fixture to the black wire in the

electrical box and connect the

white wire from the fixture to

the white wire in the electrical

box.

White

Black

House supply

Ground wire

Fixture

Ground wire

Star

Washer Cap

Nut

Fixture

Stud

Bulb

Frame

Fixture

4. Remove the cover, hex nut and star washer

from the fixture. Feed the wires from the fixture

through the hole in the frame and position the

fixture into the frame as shown.

5. Secure the fixture to the frame by tightening

the hex nut

6. Position the cover in place. Install the length

of rod that is required by threading wire through

the rod and screwing it to the fixture. Install

swivel to the rod, ensuring that the sleeve is at

the swivel.

2-2

CANARMNA ICH2012B04BKG15 User manual

Brand: CANARMNA

Model: ICH2012B04BKG15

Type: User manual

Download PDF

report

CANARMNA ICH2012B04BKG15 User manual

CANARMNA ICH2012B04BKG15 User manual

Related papers

Other documents