2. Computers & electronics
  3. Telecom & navigation
  4. Power banks
  5. Promate
  6. AuraVolt-10
AuraVolt-10

Promate AuraVolt-10 User guide

  • Hello! I am an AI chatbot trained to assist you with the Promate AuraVolt-10 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AuraVolt-10
10000mAh Qi Wireless Charging
Power Bank
Lithium Polymer • Dual USB Output Ports • Micro-USB & USB-C Input
2 1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
Introduction
This Qi battery charger is a combination of fast wireless charging pad and portable power bank,
built-in high-power QI wireless charging transmitter and a high capacity 10000mAh rechargeable battery.
Incredibly sleek & lightweight, AuraVolt-10 is portable & easy to carry around. Engineered to be an
efficient and high-speed charging pad for iPhone X, iPhone 8 Plus, iPhone 8 and other Qi enabled
devices—just lay your phone onto the charging pad and go. There’s no need to remove your device from
its case when powering up, AuraVolt-10 Wireless Charging Pad can charge through most lightweight
cases. Charge any USB powered devices with the ultra-fast dual USB charging ports.
With AuraVolt-10, remain powered up always.
Packaging Contents
• AuraVolt-10 Back-up Battery
• USB Charging Cable
• User Guide
Specifications
• Battery Capacity: 10000mAh
• Battery Type: Li-Polymer
• Input:
o Micro USB: 5V/2A
o USB-C: 5V/2A
• Output:
o USB 1: 5V/2.1A
o USB 2: 5V/2.1A
o Wireless Charging: 5V/1A (5W)
• Charging Time: 5 Hours
• Wireless Charging Distance: 6-8mm
Features
• 2-in-1 Technology: This Qi battery charger is a combination of fast wireless charger pad and
portable power bank, built-in high-power QI wireless charging transmitter and a high capacity
10000mAh rechargeable battery.
• Multiple Inputs: : The AuraVolt-10 can be recharged using either Lightning cable or Micro- USB or
USB-C cable. Now you can conveniently use the same cable to charge your phone and external battery.
•
Ultra-Fast Dual USB Ports: Charge your USB powered devices with the ultra-fast dual USB ports.
• Case Compatibility: Charge without removing your case. The AuraVolt-10 Wireless Charging Pad
is engineered to work with most lightweight cases.
• Adaptive Charging: Automatically detects connected device and supplies maximum charging
current as per the device.
English
2 1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
English
Precautions:
Please read all safety instructions and warnings thoroughly before using this product. Improper
use of this product may result in damage to this or attached products.
1. Do not disassemble the back-up battery or attempt to fix it.
2. Kindly use an original charging cable provided to charge the product.
3. Do not attempt to replace any part of this Back-up battery or battery inside.
4. Do not crush, puncture, dispose of in fire, short the contacts or expose the battery to water or
other liquids.
5. Do not connect input and output in reverse.
6. Do not store or use the battery in a high temperature environment, including intense sunlight or heat.
7. Avoid drops, bumps, abrasions and impacts.
8. If there is any reason to believe that there is damage to the battery, discontinue use immediately.
9. If you find that the battery is too hot, or is emitting an odor, or is deformed, punctured or exhibits
any suspicious or abnormal behavior, discontinue use immediately and contact our customer service.
10. Always charge this product before extended storage.
Appearance & Interface Description
1. USB 2 Port
2. USB 1 Port
3. USB-C Input Port
4. Micro-USB Input Port
5. LED Battery Level Display
6. Wireless Charging Area
AuraVolt-10
10000mAh
1
2
4
3
5
6
2 1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
Operation Instructions
Checking the remaining power left in AuraVolt-10 back-up battery
1. To view the remaining power left, view the LED Battery Level Display
Indicator
Capacity
Charging AuraVolt-10 back-up battery
•
Connect one end of the Micro-USB Cable to AuraVolt-10 and the other end to a
desktop/laptop or a USB Power Adapter.
• Connect one end of the USB-C Cable to AuraVolt-10 and the other end to a desktop/laptop or a
USB Power Adapter.
Charging USB chargeable devices using the USB Port
•
Plug the USB cable into the USB output port on AuraVolt-10 back-up battery and the other end
into the device.
Charging Qi chargeable devices using the Wireless Charger
• Place your Qi-enabled device on the Wireless Charging Area ensuring your device is properly
aligned with the charging coil.
• Your device will now automatically begin charging.
Green LED
100% 66%-99% 33%-65% 1%-32%
0%
Green LED
Flashing
Blue Light
Flashing
Red Light
Flashing
No LED
Light
English
2 1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26
/