JVC 0807TNH-II-IM User manual

Category
LCD TVs
Type
User manual

This manual is also suitable for

Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
LCT2329-001A-A
0807TNH-II-IM
Model Number:
Serial Number:
Illustration of LT-42X898 and RM-C1400
For Models:
LT-37X898
LT-42X898
LT-47X898
LCD Flat Television Users Guide
2
Important Safety Precautions
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES
REGARDING THE USE OF THIS UNIT.
1. Operate only from the power source specified on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid Improper installation and never position the unit where good ventilation is unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair
it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
* When you don’t use this TV set for a long period of time, be sure to disconnect both the
power plug from the AC outlet and antenna for your safety.
* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or
other outlet unless the blades can be fully inserted to prevent blade exposure.
CAUTION: To reduce the risk of electric shock. Do not
remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
As an “ENERGY STAR
®
” partner,
JVC has determined that this
product or product model meets the
“ENERGY STAR
®
” guidelines for energy
efficiency.
3
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal
of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information,
please contact your local authorities or for USA, the Electronic Industries
Alliance: http://www.eiae.org
4
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
16) Avoid improper installation and never position the unit where good ventilation is impossible.
When installing this TV, distance recommendations must be maintained between the set
and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the
minimum distance guidelines shown for safe operation.
17) Cautions for installation
— Do not tilt the TV towards the left or right, or towards the back.
— Install the TV in a corner on the floor so as to keep cords out of the way.
The TV will generate a slight amount of heat during operation. Ensure that sufficient
space is available around the TV to allow satisfactory cooling.
18) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.
19) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
20) When this TV is connected to the wall outlet, it is always on standby even when all the LED
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.
150 mm
200 mm
150 mm
200 mm
50 mm
FCC Notice:
Caution: Changes or modi cations not expressly approved by party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
5
Warnings
Displaying xed images for extended periods of time can leave a subtle but temporary ghost
image on your screen. To avoid this, mix your viewing pattern.
Examples include, but are not limited to the following:
Avoiding Ghost Images
XYZ XYZ
TV on
TV off
For example...
Stock-market report bars
Shopping channel logos and pricing
displays
• Video game patterns or scoreboards
Bright station logos
Internet web sites or other computer-style
images
DVD discs, video tapes, laser discs
Broadcast, cable, satellite channels or
digital television tuners/converters
We have an important note for customers who subscribe to basic cable services (do not have
a separate cable box) and plan to use their JVC TV remote control to select channels.
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is
receiving through the RF input), every channel number available from your cable company
will appear in your television’s Channel Summary and they will all be marked as available for
scanning. Even though every channel is detected and appears as available, you will only be
able to view those that you speci cally subscribe to from your cable company. This will likely
mean there are blank channels between those channels you wish to scan or “surf”.
We apologize for any inconvenience this may cause but it is important to note that this is
not a malfunction of your television. If you want to sequentially scan those channels you
subscribe to without blank ones in between, you can contact your cable company for their
cable box and remote.
6
Warnings
Caring for the Cabinet
Caring for the Screen
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
DO NOT allow liquid to enter the TV through the ventilation slots.
DO NOT use strong or abrasive cleaners on the TV.
DO NOT spray liquids or cleaners directly on the TV’s surface.
DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.
These will remove the coating layer and cause discolorations.
Do not push or hit the screen. This could cause scratches on the screen surface and image
distortions.
Tidying the cables
A cable holder which keeps your connection cables tidy is attached to the back of the stand.
7
Warnings
Disconnecting the stand
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.
1) Place the TV face down on a soft cloth on a table.
2) Remove the four screws from the back of the TV.
3) Pull out the stand from the TV.
4) Cover the hole with a bottom cover and tighten the screw.
Note:
• To re-install the stand, reverse the procedure from 4) to 1).
8
Table of Contents
Important Safety Precautions . . 2
Warnings . . . . . . . . . . . . . . . 5
Quick Setup . . . . . . . . . . . . . . 9
Unpacking your TV . . . . . . . . . . . . 9
TV Models . . . . . . . . . . . . . . . . 10
TV Remote Control . . . . . . . . . . . 11
Getting Started . . . . . . . . . . . . . 12
The Remote Control . . . . . . . . . . 12
Connecting Your Devices . . . . . . . 13
Interactive Plug In Menu . . . . . . . . 24
Onscreen Menus . . . . . . . . . 27
Using the Guide . . . . . . . . . . . . . 27
Onscreen Menu System . . . . . . . . . 28
Initial Setup . . . . . . . . . . . . . 30
HDMI Size . . . . . . . . . . . . . . . . . 30
Video-1 Audio . . . . . . . . . . . . . 30
Noise Muting . . . . . . . . . . . . . . 31
Front Panel Lock . . . . . . . . . . . . 31
Video Input Label . . . . . . . . . . . 32
Position Adjustment . . . . . . . . . . . . 33
Power Indicator . . . . . . . . . . . . . 33
Illumination . . . . . . . . . . . . . . . . 34
Language . . . . . . . . . . . . . . . . 34
Closed Caption . . . . . . . . . . . . . 34
Auto Shut Off . . . . . . . . . . . . . . 37
XDS ID . . . . . . . . . . . . . . . . . . 37
Auto Tuner Setup . . . . . . . . . . . . 37
Channel Summary . . . . . . . . . . . . 38
V-Chip . . . . . . . . . . . . . . . . . . 40
Set Lock Code . . . . . . . . . . . . . 46
Auto Demo . . . . . . . . . . . . . . . 47
Digital Setup . . . . . . . . . . . . . . . 47
V5 Input . . . . . . . . . . . . . . . . . 49
Picture Adjust . . . . . . . . . . . . . 50
Picture Settings . . . . . . . . . . . . . 50
Color Temperature . . . . . . . . . . . . 50
Color Management . . . . . . . . . . . . 51
Dynamic Gamma . . . . . . . . . . . . . 51
Smart Picture . . . . . . . . . . . . . . 51
Natural Cinema . . . . . . . . . . . . . . 52
Digital VNR . . . . . . . . . . . . . . . 52
MPEG NR . . . . . . . . . . . . . . . 53
Smart Sensor . . . . . . . . . . . . . . 53
Sensor Effect . . . . . . . . . . . . . . . 53
Theater Pro II . . . . . . . . . . . . . . . 53
Reset . . . . . . . . . . . . . . . . . . 54
Sound Adjust . . . . . . . . . . . . . 55
Sound Settings . . . . . . . . . . . . . 55
Turn On Volume . . . . . . . . . . . . . 55
Volume Limit . . . . . . . . . . . . . . 55
Reset . . . . . . . . . . . . . . . . . . 55
Clock/Timers . . . . . . . . . . . . . . . . 56
Set Clock . . . . . . . . . . . . . . . . 56
On/Off Timer . . . . . . . . . . . . . . . 57
Button Functions . . . . . . . . . . 58
Power . . . . . . . . . . . . . . . . . . 58
Number Buttons . . . . . . . . . . . . . 58
Tune . . . . . . . . . . . . . . . 58
Sub Channel . . . . . . . . . . . . . 58
Channel +/- . . . . . . . . . . . . . 58
Volume +/- . . . . . . . . . . . . . 59
Muting . . . . . . . . . . . . . . . . . . 59
D/A (Digital/Analog) . . . . . . . . . . . . 59
Input . . . . . . . . . . . . . . . . . . . 59
Return+/TV . . . . . . . . . . . . . . . 60
Light . . . . . . . . . . . . . . . . . . 60
Menu . . . . . . . . . . . . . . . . . . 60
OK . . . . . . . . . . . . . . . . . . . 60
Back . . . . . . . . . . . . . . . . . . . 60
Favorite . . . . . . . . . . . . . . . . 61
Aspect . . . . . . . . . . . . . . . . . 62
Guide . . . . . . . . . . . . . . . 63
Sound . . . . . . . . . . . . . . . . . . 64
ML/MTS . . . . . . . . . . . . . . . . . 64
Video Status . . . . . . . . . . . . . . . 65
C.C. . . . . . . . . . . . . . . . . . . . 65
Sleep Timer . . . . . . . . . . . . . . . 66
Display . . . . . . . . . . . . . . . . . 66
Twin . . . . . . . . . . . . . . . . . 67
Swap . . . . . . . . . . . . . . . . . 67
Select . . . . . . . . . . . . . . . . . 68
Freeze . . . . . . . . . . . . . . . . . 68
Mode . . . . . . . . . . . . . . . . . . 68
External device control buttons . . . . . 68
Remote Programming . . . . . . 69
OSD Information . . . . . . . . . . 75
Weak Signal . . . . . . . . . . . . . 75
No Program . . . . . . . . . . . . . . 75
Invalid Signal . . . . . . . . . . . . . 75
Troubleshooting . . . . . . . . . . 76
Specifications . . . . . . . . . . 78
Warranty . . . . . . . . . . . . . 79
Authorized Service Center . . . 80
Notes . . . . . . . . . . . . . . . 81
9
Quick Setup
Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your
new television, please check to make sure you have all of the following items. In addition to
this guide, your television box should include:
POWER
D/A
MODE
TV STB VCR DVD AUDIO
INPUT
123
456
789
0
TUNE
TV
RETURN
+
LIGHT MUTING
– CH + – VOL +
RM-C1400
TV
DVR
STATUS
VIDEO
GUIDE
TV/VCR
SUB T.
SUB CH C.C. DISPLAY
TWIN SLEEP ML/MTS
SWAP SELECT FREEZE
SOUND
OK
M
E
N
U
F
A
V
O
R
I
T
E
A
S
P
E
C
T
B
A
C
K
V1 V2 V3 V4 V5
+
AA Alkaline
+
AA Alkaline
We recommend that before you start using your new television, you read this entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
AA Batteries x 2
Television x 1
Remote Control x 1
Note: Your television
and/or remote
control may differ
from the examples
illustrated here.
Cover x 1 Screw x 1
Unpacking your TV
10
INPUT 5
UDIO OUT
FOR HDMI 1
R
A
U
D
I
O
I
N
P
U
T
L
INPUT 4
Y
V
I
D
E
O
R
-
A
U
D
I
O
-
L
V
I
D
E
O
R
-
A
U
D
I
O
-
L
P
C
I
N
(
D
-
S
U
B
)
INPUT 3
Y
P
R
P
B
V
I
D
E
O
R-
A
UD
I
O
-
L
S
-
V
I
D
E
O
AUDIO OUT
AUDIO OUT
R-
A
UD
I
O
-
L
P
R
P
B
RS-232C
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
INPUT 5 INPUT 2 INPUT 1
INPUT 5
UDIO OUT
FOR HDMI 1
R
AU
D
I
O I
NP
U
T
L
INPUT 4
Y
V
I
D
EO
R
-
A
U
D
I
O
-
L
V
I
D
E
O
R
-
A
U
D
I
O
-
L
PC
I
N
(
D
-S
U
B)
INPUT 3
Y
P
R
P
B
V
I
D
EO
R
-
A
U
D
I
O
-
L
S
-
V
I
D
EO
UDIO OUT
AUDIO OUT
R
-
A
U
D
I
O
-
L
P
R
P
B
RS-232C
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
INPUT 5 INPUT 2 INPUT 1
Quick Setup
Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television.
Rear Panel Diagram
Side Panel Diagram
INPUT MENU C H VOL
OK BACK
POWER
TV Models
Notes:
The terminal labeled "SERVICE ONLY", is exclusively used to update the
software version.
For governing the usage of the RS-232C terminal, consult your dealer.
11
Quick Setup
Notes:
For information on remote control buttons, see pages 58 - 68.
SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an
ATSC antenna or Digital Cable, you can use these buttons.
This remote control is capable of operating many external device brands. See page 69 - 74
for how to program the remote control.
RM-C1400
POWER
D/A
MODE
TV STB VCR DVD AUDIO
INPUT
123
456
789
0
TUNE
TV
RETURN
+
LIGHT MUTING
– CH + – VOL +
RM-C1400
TV
DVR
STATUS
VIDEO
GUIDE
TV/VCR
SUB T.
SUB CH C.C. DISPLAY
TWIN SLEEP ML/MTS
SWAP SELECT FREEZE
SOUND
OK
M
E
N
U
F
A
V
O
R
I
T
E
A
S
P
E
C
T
B
A
C
K
V1 V2 V3 V4 V5
TV Remote Control
12
Quick Setup
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. If you have questions, or for more detailed
information on any of these steps, please consult other sections of this manual.
Before you can operate your remote control, you first need
to install the batteries (included).
Raise the latch on the remote's back cover to remove.
Insert two batteries, carefully noting the "+" and "–"
markings. Place the "–" end in the unit first. Snap the
cover back into place.
When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes (ex. VCR,
DVD) may have to be reset. See pages 69 - 74.
Getting Started
Step 1 – The Remote Control
Using Menu Buttons
To use the menu functions, press the MENU button. Next,
select a menu using the four arrow keys. The four arrow keys
are used only for menu selections.
DVR
STATUS
OK
M
E
N
U
F
A
V
O
R
I
T
E
A
S
P
E
C
T
B
A
C
K
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner
of the remote. If this is the first time you are turning on the TV, the interactive
plug in menu appears.
At first, to watch your TV, select the TV mode by pressing the MODE button on
the remote control before you turn the TV power on.
• See page 58 to 68 for details regarding the remote control buttons.
POWER
13
Step 2 - Connecting your devices
Quick Setup
Notes:
• The following connection diagrams are examples.
After you are finished connecting your devices, plug the power cord into the nearest power
outlet and turn on the TV.
If you follow these diagrams and the television does not work properly, contact your local
cable operator.
• To connect a DVD player, see VCR Connection.
• If you have a satellite television system, refer to the satellite TV manual.
Used to connect an external
antenna or cable TV system to your
TV.
Used to make video connections
with S-Video VCRs, Camcorders
and DVD players.
Coaxial Cables
S-Video Cable
Used to connect audio/video
devices like VCRs, DVD players,
stereo amplifiers, game consoles,
etc.
Component Cables
Composite Cables
Audio Cables
To make these connections, you will use plugs like the ones illustrated below.
TV Rear Panel
Cable or Antenna
Output
Coaxial Cable
No VCR Connection
14
Quick Setup
Notes:
Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
You may also connect the DVD player to Input 1.
INPUT 5
UDIO OUT
FOR HDMI 1
R
AUDIO INP
UT
L
INPUT 4
Y
V
I
D
E
O
R
-
AU
D
I
O
-
L
V
I
D
EO
R
-
A
U
D
I
O
-
L
P
C
I
N
(D
-S
U
B
)
INPUT 3
Y
P
R
P
B
V
I
DEO
R
-
AU
D
I
O
-L
S
-
VID
E
O
UDIO OUT
AUDIO OUT
R
-
A
U
D
I
O
-
L
P
R
P
B
TV Rear Panel
Cable or Antenna
Output
Coaxial Cable
VCR
DVD Player
OR
IN
OUT
IN
OUT
R L V
Y
P
B
P
R
OUT
AUDIO OUT
R L
Green
Blue
Red
TV Rear Panel
VCR • DVD Connection
Note:
If this connection setup does not work for you, try the connection setup on page 15.
Diagram #1
15
Quick Setup
Diagram #2
INPUT 5
UDIO OUT
FOR HDMI 1
R
AUDIO INP
UT
L
INPUT 4
Y
V
I
D
E
O
R
-
AU
D
I
O
-
L
V
I
D
EO
R
-
A
U
D
I
O
-
L
P
C
IN
(D
-S
U
B
)
INPUT 3
Y
P
R
P
B
V
I
DEO
R
-
AU
D
I
O
-L
S
-
VID
EO
UDIO OUT
AUDIO OUT
R
-
A
U
D
I
O
-
L
P
R
P
B
TV Rear Panel
Coaxial Cable
VCR
DVD Player
OR
IN
OUT
IN
OUT
R L V
Y
P
B
P
R
OUT
AUDIO OUT
R L
Green
Blue
Red
Two-Way Splitter
(Not supplied)
Cable or Antenna
Output
TV Rear Panel
IN
OUT OUT
16
Quick Setup
1) Connect a yellow composite cable from the camcorder VIDEO OUT to the VIDEO IN on the
back of the TV.
2) Connect a white cable from the camcorder LEFT AUDIO OUT to the LEFT AUDIO IN on the
back of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT to the RIGHT AUDIO IN on
the back of the TV.
You can connect a camcorder to your television by using the input jacks located on the back
of the TV.
I
INPUT 4
Y
VI
DEO
R
-
AU
D
I
O
-
L
V
I
D
EO
R
-
A
U
D
IO
-
L
INPUT 3
Y
P
R
P
B
V
I
DEO
R
-
AU
D
I
O
-
L
S
-
V
IDE
O
P
R
P
B
CAMCORDER
TV Rear Panel
Connecting to a Camcorder
17
Quick Setup
UDIO OUT
FOR HDMI 1
R
AUD
I
O
I
NPUT
L
INPUT 3
P
R
P
B
V
I
DEO
R
-
AU
D
I
O
-
L
S
-
V
ID
E
O
UDIO OUT
AUDIO OUT
R
-
A
U
D
I
O
-
L
Speaker
Speaker
Amplifier
TV Rear Panel
1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the
LEFT AUDIO INPUT on the amplifier.
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the
RIGHT AUDIO INPUT on the amplifier.
Notes:
Refer to your amplifier’s manual for more information.
You can use AUDIO OUTPUT for your home theater system.
If you have a device connected to INPUT-1, INPUT-2 or INPUT-5 (set "V5 INPUT" in the
INITIAL SETUP menu to "HDMI"). You will not be able to hear any audio from the AUDIO
OUT on the back of the TV.
Connecting to an External Amplifier
18
Quick Setup
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in
their digital form.
RS-232C
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
INPUT 5 INPUT 2 INPUT 1
UDIO OUT
FOR HDMI 1
R
A
UD
IO INP
UT
L
R
-
AU
D
I
O
-L
UDIO OUT
AUDIO OUT
R
-
A
U
D
I
O
-
L
DTV Decoder
HDMI to DVI Cable
A
fter the connections have been made,
tighten the screw to secure the cables.
TV Rear Panel
LR
AUDIO OUT
DIGITAL OUT
TV Rear Panel
Connecting to a Digital TV Receiver
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder to
the HDMI INPUT-1 on the back of the TV.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT to the RIGHT AUDIO INPUT
HDMI AUDIO IN "R" on the back of the TV.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT to the LEFT AUDIO INPUT
HDMI AUDIO IN "L" on the back of the TV.
Personal computer compatibility cannot be guaranteed.
Use an HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “HDMI SIZE” in the INITIAL SETUP menu to adjust it.
(Refer to page 30.)
When you do the above connection, set "VIDEO-1 AUDIO" in the INITIAL SETUP menu to
"ANALOG". See "VIDEO-1 AUDIO", page 30.
• The Analog Audio input can only be used with the HDMI INPUT-1.
When setting the “VIDEO-1 AUDIO - ANALOG/DIGITAL” menu setting on the TV, please note
that this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI adapter
this connection must be made to the HDMI INPUT-1 along with analog audio cables.
19
Quick Setup
By connecting an HDMI compatible device, high definition pictures can be displayed on your
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or other HDMI
compatible device.
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all
digital audio/video interface. HDMI provides an interface between any audio/video source,
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a
digital television (DTV).
HDMI Compatible Device
HDMI Cable
TV Rear Panel
RS-232C
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
INPUT 5 INPUT 2 INPUT 1
LR
AUDIO OUT
DIGITAL OUT
Connecting to an HDMI Compatible Device
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device to
the HDMI INPUT-1 on the back of the TV.
Notes:
When you do the above connection, set "VIDEO-1 AUDIO" in the INITIAL SETUP menu to
"DIGITAL". See "VIDEO-1 AUDIO", page 30.
Some decoders may not respond depending on the equipment that is connected to the HDMI.
If the HDMI output device signal is changed (for example, 480i/60Hz is changed to
480p/60Hz), the screen may turn green and there may be some distortion for a short time
until the signal becomes stable.
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.
This JVC television can accept a variety of HD signals, including 720/60p, 1080/60i and
1080/60p. It does not accept a 1080/24p signal. Please note that in some cases, a Blu-ray
or HD-DVD may only offer the choice of 1080/60i or 1080/24p. In this case, it is necessary
to choose the 1080/60i output. Please refer to your Blu-ray/HD-DVD manual for complete
details on choosing the correct output.
20
Quick Setup
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or DOLBY DIGITAL.
RS-232C
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
INPUT 5 INPUT 2 INPUT 1
TV Rear Panel
Amplifier
1) Connect the optical cable from underneath the television to the back of the amplifier.
Notes:
This terminal can only output digital audio.
In order to use the optical output connection, select PCM or DOLBY DIGITAL on Digital
Sound in the DIGITAL SETUP Menu. See page 48.
Refer to your owners manual on using your amplifier.
You cannot output sound from your Optical Output connection if the audio source is from
your HDMI device.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

JVC 0807TNH-II-IM User manual

Category
LCD TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI