Barco Coronis 3MP (MDCG-3120) User guide

Getting Started Guide

Coronis

Supported displays:

MDCC 2121, MDCG 2121, MDCG 3120

(This page intentionally left blank.)

2

(This page intentionally left blank.)

3

Copyright notice

This document is copyrighted. All rights are reserved. Neither this

document, nor any part of it, may be reproduced or copied in any

form or by any means - graphical, electronic, or mechanical including

photocopying, taping or information storage and retrieval systems -

without written permission of Barco

Notice

Although every attempt has been made to achieve technical accuracy

in this document, we assume no responsibility for errors that may be

found. Our goal is to provide you with the most accurate and usable

documentation possible; if you discover errors, please let us know.

Barco software products are the property of Barco. They are

distributed under copyright by Barco N.V. or Barco, Inc., for use only

under the specific terms of a software license agreement between

Barco N.V. or Barco Inc. and the licensee. No other use, duplication, or

disclosure of a Barco software product, in any form, is authorized.

The specifications of Barco products are subject to change without

notice.

Trademarks

All trademarks and registered trademarks are property of their

respective owners.

Patent information

This product is covered under the following intellectual property

rights:

US Patent RE43,707

US Patent 7,038,186

US Patent 7,166,829

US Patent 6,950,098

European Patent 1 274 066.

4

Indications for use

The Coronis displays are intended to be used in displaying and

viewing digital images for review and analysis by trained medical

practitioners.

The Coronis displays are not intended for primary diagnostic review of

Mammography images.

Table of Contents

5

Table of Contents

Preface..................................................................................... 7

Regulatory compliance information................................................ 8

FCC Compliance Information..................................................... 8

Canadian notice ........................................................................ 9

CE mark notice ............................................................................... 10

Environmental information ........................................................... 11

Safety Instructions ......................................................................... 14

EMC notice ...................................................................................... 17

Explanation of symbols.................................................................. 23

Recommendations for using your display system ....................... 25

Display controller installation ............................................... 27

Display Controller Installation ....................................................... 28

Which display controller? ....................................................... 28

Installing a Barco display controller....................................... 28

Installation Procedure............................................................. 31

Display installation................................................................ 37

Installation precautions ................................................................. 38

Display parts, controls and connectors ......................................... 39

Front ........................................................................................ 39

Rear ......................................................................................... 41

Connectors............................................................................... 41

Side.......................................................................................... 42

Foot.......................................................................................... 43

Single-head installation................................................................. 45

Dual-head installation ................................................................... 47

Vesa-mount installation ................................................................ 50

Adjust panel orientation................................................................ 51

Table of Contents

6

Connecting the signal cables......................................................... 52

Cable routing.................................................................................. 55

Cleaning instructions...................................................................... 58

Precautions.............................................................................. 58

Front glass............................................................................... 58

Cabinet .................................................................................... 59

Software installation ............................................................. 61

Driver and Software Installation ................................................... 62

Driver and software installation prerequisites...................... 62

Installing the B

ARCO MXRT drivers and software ................... 62

Installing the B

ARCOMED CORONIS or Nio drivers and software68

Where to get more information............................................75

Troubleshooting.....................................................................77

General tips.................................................................................... 78

Configuring Windows..................................................................... 79

Setting the resolution of your B

ARCO CORONIS Display............ 79

Setting the Color and Palette Modes..................................... 81

Configuring the Windows desktop......................................... 81

Technical Specifications......................................................... 83

Warranty Statement .............................................................. 93

Preface

7

Preface

Regulatory compliance information

8

Regulatory compliance information

FCC Compliance Information

CLASS B:

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with manufacturer’s instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including

interference that may cause undesired operation.

The use of shielded cables for connection of the monitor to the

graphics card is required to ensure compliance with FCC regula-

tions. Changes or modifications to this unit not expressly

approved by Barco could void the user’s authority to operate this

equipment.

Regulatory compliance information

9

Canadian notice

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est conforme à la norme NMB-001 du Canada.

CE mark notice

10

CE mark notice

Declaration of Conformity in accordance with Article 10 (1) of the CE directive

This product has been designed and manufactured in accordance with

the essential requirements of the Directives 2004/108/EC and

MDD 93/42/EEC (amended by 2007/47/EC (class II b product), and

for this product the procedures of Annex II have been applied to mark

the product with the CE label.

Environmental information

11

Environmental information

Disposal Information

This product consists of devices that may contain mercury, which must

be recycled or disposed of in accordance with local, state, or country

laws. (Within this system, the backlight lamps in the monitor display

contain mercury.)

This equipment has required the extraction and use of natural

resources for its production. It may contain hazardous substances for

health and environment.

In order to avoid the dissemination of those substances in the

environment and to diminish the pressure on natural resources, we

encourage you to use the appropriate take-back systems.

Those systems will reuse or recycle most of the materials of your end-

of-life equipment in a sound way.

The crossed-out wheeled bin symbol invites you to use those

systems.

If you need more information on the collection, reuse and

recycling systems, please contact your local or regional waste

administrator.

You can also contact us for more information on the environmental

performances of our products.

Environmental information

12

Information for China ROHS compliance

Table of toxic and hazardous substances/elements and their content,

as required by China’s management methods for controlling pollution

by electronic information products

中国大陆 RoHS

根据中国大陆《电子信息产品污染控制管理办法》 ( 也称为中国大陆

RoHS)，以下部份列出了本产品中可能包含的有毒有害物质或元素的名称

和含量。

本表适用的产品

液晶显示器

有毒有害物质或元素

Toxic or hazardous Substances and Elements

Part Name Pb Hg Cd Cr6+ PBB PBDE

Metal parts O O O O O O

Plastic parts O O O O O O

PCB or PCBA O O O O O O

LCD panel X X O O O O

Power supply/adapter X O O O O O

Power cable X O O O O O

Connectors and cables O O O O O O

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous

materials for this part is below the limit requirement in SJ/T11363-2006.

X: Indicates that this toxic or hazardous substance contained in at least one of the

homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006

Environmental information

13

LCD Monitor 　　　　　　

零部件名稱有毒有害物質或元素

　铅（Pb）

汞

（Hg）

镉

（Cd）

六价铬

（Cr6+）

多溴联苯

（PBB）

多溴二苯醚

（PBDE）

金属机构件 O O O O O O

塑料机构件 O O O O O O

电路板组件 * O O O O O O

液晶面板 X X O O O O

电源模块 / 适配器 X O O O O O

电源线 X O O O O O

外部信号连接线 O O O O O O

*：电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路

、连接器等

○：表示该有毒有害物质在该部件所有均质材料中的含量均在《电子信息产品中有

毒有害物质的限量要求标准》规定的限量要求以下

×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出《电子信息产品中

有毒有害物质的限量要求标准》规定的限量要求；

但是上表中打 “×” 的部件，其含量超出是因为目前业界还没有成熟的可替代的技术

Safety Instructions

14

Safety Instructions

General Recommendations

Read the safety and operating instructions before operating the

display.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the display and in the operating

instructions manual.

Follow all instructions for operation and use.

Electrical shock

WARNING: To avoid the risk of electric shock, this equipment must

only be connected to a supply mains with protective earth.

WARNING: Do not modify this equipment without authorization of the

manufacturer.

Type of protection (electrical):

Display with external power supply: Class I equipment

Degree of safety (flammable anesthetic mixture):

Equipment not suitable for use in the presence of a flammable

anesthetic mixture with air or with oxygen or nitrous oxide.

Non-patient care equipment

Equipment primarily for use in a health care facility that is intended

for use where contact with a patient is unlikely.

Safety Instructions

15

Power connection - display with external power supply

• Power requirements: The display must be powered using the

delivered medical approved 12 VDC power supply.

• The medical approved DC power supply must be powered by

the AC mains voltage.

Power cords:

• Utilize a UL-listed detachable power cord, 3-wire, type SJ or

equivalent, 18 AWG min., rated 300 V min., provided with a

hospital-grade type plug 5-15P configuration for 120V

application, or 6-15P for 240V application.

• Do not overload wall outlets and extension cords as this may

result in fire or electric shock.

• Mains lead protection (U.S.: Power cord): Power cords should

be routed so that they are not likely to be walked upon or

pinched by items placed upon or against them, paying

particular attention to cords at plugs and receptacles.

Transient over-voltage

If the equipment is not used for a long time, disconnect it from the AC

inlet to avoid damage by transient over-voltage.

To fully disengage the power to the unit, please disconnect the power

cord from the AC inlet.

Water and moisture

Never expose the display to rain or moisture.

Never use the display near water - e.g. near a bathtub, washbasin,

swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

Do not cover or block the ventilation openings in the cover of the set.

When installing the display in a cupboard or another closed location,

heed the necessary space between the set and the sides of the

cupboard.

Safety Instructions

16

Installation

Place the display on a flat, solid and stable surface that can support

the weight of at least 3 displays. If you use an unstable cart or stand,

the display may fall, causing serious injury to a child or adult, and

serious damage to the equipment.

More warnings in the Installation chapter.

This apparatus conforms to:

IEC 60950-1:2005, IEC 60601-1:1988 + A1:1991 + A2:1995, IEC 60601-

1:2005, IEC 60601-1-2:2007, UL 60950-1, 1st edition, 2007, UL 60601-

1, 1st edition - 2006,ANSI/AAMI ES 60601-1:2006,CSA C22.2 No.

60950-1-03, 1st edition, 2006, CAN/CSA-C22.2 No. 601.1-M90, 2005,

CAN/CSA-C22.2 No. 60601-1, 2008, CE - 2004/108/EC, CE - 93/42/

EEC + 2007/47/EC, Class IIb, CE - 2011/65/EC, EN 60601-1-2:2007,

RoHs, Demko - EN 60601-1:1990 + A1:1993 + A2:1995,Demko - EN

60601-1:2006, CCC - GB9254-2008, CCC - GB4943.1-2011, CCC -

GB17625.1-2003, KCC (MDCG 2121), FCC class B, ICES-001 level B,VCCI,

FDA 510(k)

National Scandinavian Deviations for Cl. 1.7.2 :

Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun

pistorasiaan"

Norway: "Apparatet må tilkoples jordet stikkontakt"

Sweden: "Apparaten skall anslutas till jordat uttag"

EMC notice

17

EMC notice

No specific requirement on the use of external cables or other

accessories except power supply.

With the installation of the device, use only the delivered power

supply or a spare part provided by the legal manufacturer. Using

another can result in a decrease of the immunity level of the device.

Electromagnetic emissions

The B

ARCO CORONIS Display is intended for use in the electromagnetic

environment specified below.

The customer or the user of the B

ARCO CORONIS Display should assure

that it is used in such an environment.

This B

ARCO CORONIS Display complies with appropriate medical EMC

standards on emissions to, and interference from surrounding

equipment. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device

Emissions test Compliance Electromagnetic environment – guidance

RF emissions

CISPR 11

Group 1 The B

ARCO CORONIS Display uses RF energy

only for its internal function. Therefore, its

RF emissions are very low and are not likely

to cause any interference in nearby

electronic equipment

RF emissions

CISPR 11

Class B

The BARCO CORONIS Display is suitable for use

in all establishments, including domestic

establishments and those directly

connected to the public low-voltage power

supply network that supplies buildings used

for domestic purposes.

Harmonic emissions

IEC 61000-3-2

Class D

Voltage fluctuations/

flicker emissions

IEC 61000-3-3

Complies

EMC notice

18

must accept any interference received, including interference that

may cause undesired operation.

Interference can be determined by turning the equipment off and on.

If this equipment does cause harmful interference to, or suffer from

harmful interference of, surrounding equipment, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna or equipment.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced technician for help

Electromagnetic immunity

The B

ARCO CORONIS Display is intended for use in the electromagnetic

environment specified below. The customer or the user of the B

ARCO

C

ORONIS Display should assure that it is used in such an environment.

Immunity test IEC 60601

Test levels

Compliance level Electromagnetic

environment – guidance

Electrostatic

discharge (ESD)

IEC 61000-4-2

± 6kV contact

± 8kV air

± 6kV contact

± 8kV air

Floors should be wood,

concrete or ceramic tile.

If floors are covered with

synthetic material, the

relative humidity should

be at least 30%

Electrical fast

transient/burst

IEC 61000-4-4

± 2kV for power

supply lines

± 1kV for input/

output lines

± 2kV for power

supply lines

± 1kV for input/

output lines

Mains power quality

should be that of a

typical commercial or

hospital environment

Surge

IEC61000-4-5

± 1 kV line(s) to

line(s)

± 2 kV line(s) to

earth

± 1 kV line(s) to

line(s)

± 2 kV line(s) to

earth

Mains power quality

should be that of a

typical commercial or

hospital environment

EMC notice

19

U

T

is the a.c. mains voltage prior to application of the test level

Voltage dips,

short

interruptions

and voltage

variations on

power supply

input lines

IEC 61000-4-11

< 5% U

T

(> 95%

dip in U

T

) for 0.5

cycle

40% U

T

(60%

dip in U

T

) for 5

cycles

70% U

T

(30%

dip in U

T

) for 25

cycles

< 5% U

T

(>95%

dip in U

T

) for 5s

< 5% U

T

(> 95%

dip in U

T

) for 0.5

cycle

40% U

T

(60% dip

in U

T

) for 5 cycles

70% U

T

(30% dip

in U

T

) for 25

cycles

< 5% U

T

(>95%

dip in U

T

) for 5s

Mains power quality

should by that of a

typical commercial or

hospital environment. If

the user of the B

ARCO

C

ORONIS Display requires

continued operation

during power mains

interruptions, it is

recommended that the

B

ARCO CORONIS Display be

powered from an

uninterruptible power

supply or a battery.

EMC notice

20

a Field strengths from fixed transmitters, such as base stations for radio (cellu-

lar/cordless) telephones and land mobile radios, amateur radio, AM and FM

radio broadcast and TV broadcast cannot be predicted theoretically with

accuracy. To assess the electromagnetic environment due to fixed RF trans-

mitters, an electromagnetic site survey should be considered. If the mea-

Immunity

test

IEC 60601

test level

Level Electromagnetic environment –

guidance

Power

frequency

(50/60 Hz)

magnetic field

IEC 61000-4-8

3 A/m

Not

applic

able

Power frequency magnetic fields should be

at levels characteristic of a typical location

in a typical commercial or hospital

environment.

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 Vrms

150 kHz to

80 MHz

3 V/m

80 MHz to

2.5 GHz

3 V

3 V/

m

Portable and mobile RF communications

equipment should be used no closer to any

part of the B

ARCO CORONIS Display, including

cables, than the recommended separation

distance calculated from the equation

applicable to the frequency of the

transmitter.

Recommended separation distance

80 MHz to 800 MHz

800 MHz to 2.5 GHz

Where P is the maximum output power

rating of the transmitter in watts (W)

according to the transmitter manufacturer

and d is the recommended separation

distance in meters (m).

Field strengths from fixed RF transmitters,

as determined by an electromagnetic site

survey,

a

should be less than the

compliance level in each frequency range.

b

Interference may occur in the vicinity of

equipment marked with symbol:

P2.1d 

P3.2d 

Page is loading ...

Barco Coronis 3MP (MDCG-3120) User guide

Barco Coronis 3MP (MDCG-3120) User guide

Related papers

Other documents