Kingston Technology KVR133X64SC3/64 Datasheet

Category
Memory modules
Type
Datasheet
Memory Module Specification
0.000
0.787
1.250
0.000
1.141
2.660
R .078
R .030
ASSY USA
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
DESCRIPTION:
This document describes ValueRAM's CL3 8M x 64-bit (64MB) SDRAM (Synchronous
DRAM) PC133 Small Outline DIMM memory module. The components on this module
include eight 4M x 16-bit (1M x 16-bit x 4 Bank / PC133 components) 4K Refresh SDRAM
in TSOP packages. This 144-pin SODIMM uses gold contact fingers and requires +3.3V.
The electrical and mechanical specifications are as follows:
FEATURES:
CLK Cycle Time (tCC) min. = 7.5ns (CAS Latency = 3) / max. = 1000ns
Row Cycle Time (tRC) 65ns
CLK to Output (tSAC) max. = 5.4ns (CAS Latency = 3)
Single Power Supply of +3.3V (+/- .3V)
Power 1.977 W (operating)
UL Rating 94 V - 0
Document No. VALUERAM0103-001.A00
03/06/02
KVR133X64SC3/64
PC133 SDRAM 144-Pin CL3
SODIMM Memory Module
Figure 1: KVR133X64SC3/64 144-Pin SDRAM Module
Note: All measurements are in decimal inches.
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
  • Page 1 1

Kingston Technology KVR133X64SC3/64 Datasheet

Category
Memory modules
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI