Kingston Technology KVR133X64SC3/64 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Kingston Technology KVR133X64SC3/64 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Memory Module Specification
0.000
0.787
1.250
0.000
1.141
2.660
R .078
R .030
ASSY USA
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
4M x 16
TSOP
DESCRIPTION:
This document describes ValueRAM's CL3 8M x 64-bit (64MB) SDRAM (Synchronous
DRAM) PC133 Small Outline DIMM memory module. The components on this module
include eight 4M x 16-bit (1M x 16-bit x 4 Bank / PC133 components) 4K Refresh SDRAM
in TSOP packages. This 144-pin SODIMM uses gold contact fingers and requires +3.3V.
The electrical and mechanical specifications are as follows:
FEATURES:
CLK Cycle Time (tCC) min. = 7.5ns (CAS Latency = 3) / max. = 1000ns
Row Cycle Time (tRC) 65ns
CLK to Output (tSAC) max. = 5.4ns (CAS Latency = 3)
Single Power Supply of +3.3V (+/- .3V)
Power 1.977 W (operating)
UL Rating 94 V - 0
Document No. VALUERAM0103-001.A00
03/06/02
KVR133X64SC3/64
PC133 SDRAM 144-Pin CL3
SODIMM Memory Module
Figure 1: KVR133X64SC3/64 144-Pin SDRAM Module
Note: All measurements are in decimal inches.
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
/