2. Home
  3. Home furniture
  4. Living room & hall furniture
  5. TV stands
  6. MDA Designs
  7. SIRIUS 850
SIRIUS 850

MDA Designs SIRIUS 850, SIRIUS 1200 User manual

  • Hello! I am an AI chatbot trained to assist you with the MDA Designs SIRIUS 850 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the center support bar used for?
    What is the unprinted window used for?
    What cleaning agents can I use on the glass panels?
    How do I assemble the shelf clamps?
    How do I attach the doors?
Assembly Instructions
Care and Safety Notes
- Do not use fixings other than those supplied.
- Do not place very hot or very cold items against or in close proximity to any glass surface, unless
--
adequately thick mats are used to prevent such items from coming into contact with the glass.
- Do not use the glass as a chopping surface. Do not strike glass with hard or pointed items.
- When cleaning glass panels, use a damp cloth or leather with washing up liquid or soft soap in
--
necessary; do not use washing powders or any other substance containing abrasives since these can
--
scratch glass.
- Do not sit or stand on glass surfaces.
- Do not use solvent or abrasive cleaners for cleaning; Use a damp cloth when cleaning.
- Only use genuine replacement parts
- Do not over tighten screws or use power tools to assemble.
AISIRIUSMDA1
ISSUE A
CAUTION
There are many small components used
in the construction of this unit.
These should be kept away from
young children during assembly
1
Parts List
2
Top Panel x 1
3
Top Glass Panel x 1
4
Glass Shelf x 1
5
Plastic Side Panel x 2
8
Walnut Front Profile x 2
9
Oak Front Profile x 2
10
Inner Side Panel x 3
A
Screw (40mm) x 12
B
Steel Dowel x 4
C
Steel Cam x 4
E
Screw (M3 x12mm) x 4
Fixings Identification
G
D
Double Mag Catch x 1
Door Hinge Plate x 4
H
Grub Screw x 8
I
Shelf Clamp x 3
Shelf Clamp Screw x 3
J
Foot x 4
F
1
Base Panel x 1
M5 Screw x 3
K
11
Centre Support Bar x 1
6
Right Hand Glass Door x 1
7
Left Hand Glass Door x 1
M6 Bolt (30mm) x 1
L
Screwdriver x1
M
4mm Allen Key x1
N
Centre Foot x1
O
2
A x6
F x4
D
E
x4
1
10
10
10
2
Stage
1
Stage
2
3
2
A x6
Stage
3
Stage
4
B x2
8
or
9
x2
This TV cabinet is supplied with both
Walnut (8) & Oak (9) nish front proles.
Please select your desired prole before
commencing Stage 4.
4
Stage
5
I
x3
K
x3
Stage
6
8
or
9
8
or
9
Ensure Cam locks are fully
tightened by turning clockwise
Select the shelf position that best suits your
equipment before xing shelf clamps (I) in
position
C
x4
5
4
Stage
7
J
Stage
8
Secure the shelf in place
with shelf clamp screws (J)
O
L
11
G
x2
H
x4
G
x2
H
x4
Front left hand view
Front right hand view
H
x4
G
x2
6
7
6
5
Stage
9
a
b
Remove protective lm
from plastic side panels
5
locate edge of plastic side panel (5) into
groove on front prole (8 or 9)
Stage
10
3
7
Stage
11
This TV cabinet features BEAMTHRU glass which allows remote control operation of equipment inside
the cabinet with the doors closed. However, if you have a peice of equipment with a poor remote
signal (some SKY receivers suer from this), please position the particular unit on the glass shelf in the
middle position. This will then place the unit behind the unprinted window on the glass doors to allow
full function of your remote signal.
Shelf in middle
position
Poor signal unit situated behind unprinted
window on glass doors
Stage
12
An extension socked can be
xed to the rear panel to keep
all plugs & cables out of view
(extension socket & xings not
supplied)
8
Stage
13
/