Dell Vostro 3360 User manual

Category
Notebooks
Type
User manual

This manual is also suitable for

Dell Vostro 3360
Owner's Manual
Regulatory Model: P32G
Regulatory Type: P32G001
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2012 Dell Inc.
Trademarks used in this text: Dell
, the Dell logo, Dell Precision
, OptiPlex
, Latitude
, PowerEdge
, PowerVault
,
PowerConnect
, OpenManage
, EqualLogic
, Compellent
, KACE
, FlexAddress
, Force10
and Vostro
are trademarks of Dell
Inc. Intel
®
, Pentium
®
, Xeon
®
, Core
®
and Celeron
®
are registered trademarks of Intel Corporation in the U.S. and other countries. AMD
®
is a registered trademark and AMD Opteron
, AMD Phenom
and AMD Sempron
are trademarks of Advanced Micro Devices, Inc.
Microsoft
®
, Windows
®
, Windows Server
®
, Internet Explorer
®
, MS-DOS
®
, Windows Vista
®
and Active Directory
®
are either trademarks
or registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat
®
and Red Hat
®
Enterprise Linux
®
are registered trademarks of Red Hat, Inc. in the United States and/or other countries. Novell
®
and SUSE
®
are
registered trademarks of Novell Inc. in the United States and other countries. Oracle
®
is a registered trademark of Oracle Corporation
and/or its affiliates. Citrix
®
, Xen
®
, XenServer
®
and XenMotion
®
are either registered trademarks or trademarks of Citrix Systems, Inc. in
the United States and/or other countries. VMware
®
,
Virtual SMP
®
,
vMotion
®
,
vCenter
®
and
vSphere
®
are registered trademarks or
trademarks of VMware, Inc. in the United States or other countries.
IBM
®
is a registered trademark of International Business Machines
Corporation.
2012 - 06
Rev. A00
Contents
Notes, Cautions, and Warnings...................................................................................................2
1 Working on Your Computer.......................................................................................................5
Before Working Inside Your Computer.....................................................................................................................5
Turning Off Your Computer.......................................................................................................................................6
After Working Inside Your Computer........................................................................................................................6
2 Removing and Installing Components.....................................................................................9
Recommended Tools................................................................................................................................................9
Removing the Subscriber Identity Module (SIM) Card.............................................................................................9
Installing the SIM Card...........................................................................................................................................10
Removing the Security Digital (SD) Card................................................................................................................10
Installing the Secure Digital Card...........................................................................................................................10
Removing the Access Panel...................................................................................................................................10
Installing the Access Panel....................................................................................................................................11
Removing the Wireless Local Area Network (WLAN) Card...................................................................................11
Installing the WLAN Card.......................................................................................................................................11
Removing the Coin-Cell Battery..............................................................................................................................11
Installing the Coin-Cell Battery...............................................................................................................................12
Removing the Memory............................................................................................................................................12
Installing the Memory.............................................................................................................................................12
Removing the Keyboard..........................................................................................................................................12
Installing the Keyboard...........................................................................................................................................14
Removing the Palmrest...........................................................................................................................................14
Installing the Palmrest............................................................................................................................................17
Removing the Battery.............................................................................................................................................18
Installing the Battery..............................................................................................................................................19
Removing the Hard Drive........................................................................................................................................19
Installing the Hard Drive.........................................................................................................................................20
Removing the Display-Hinge Cover........................................................................................................................21
Installing the Display Hinge Cover..........................................................................................................................21
Removing the Display Assembly.............................................................................................................................22
Installing the Display Assembly..............................................................................................................................22
Removing the Display Bezel...................................................................................................................................23
Installing the Display Bezel.....................................................................................................................................24
Removing the Display Panel...................................................................................................................................24
Installing the Display Panel....................................................................................................................................27
Removing the Camera Module...............................................................................................................................27
Installing the Camera Module.................................................................................................................................28
Removing the Fan...................................................................................................................................................28
Installing the Fan.....................................................................................................................................................29
Removing the System Board...................................................................................................................................29
Installing the System Board....................................................................................................................................31
Removing the Heat Sink..........................................................................................................................................31
Installing the Heat Sink...........................................................................................................................................32
Removing the Speakers..........................................................................................................................................32
Installing the Speakers...........................................................................................................................................33
Removing the Power Connector.............................................................................................................................34
Installing the Power Connector..............................................................................................................................34
Removing the Input/Output (I/O) board...................................................................................................................34
Installing the I/O Board...........................................................................................................................................35
3 System Setup.............................................................................................................................37
Boot Sequence.......................................................................................................................................................37
Navigation Keys......................................................................................................................................................37
System Setup Options.............................................................................................................................................38
Updating the BIOS .................................................................................................................................................42
System and Setup Password..................................................................................................................................42
Assigning a System Password and Setup Password......................................................................................42
Deleting or Changing an Existing System and/or Setup Password..................................................................43
4 Diagnostics.................................................................................................................................45
Enhanced Pre-Boot System Assessment (ePSA) Diagnostics...............................................................................45
Device Status Lights...............................................................................................................................................45
Battery Status Lights..............................................................................................................................................46
Diagnostic Beep Codes..........................................................................................................................................46
5 Specifications............................................................................................................................49
6 Contacting Dell..........................................................................................................................55
1
Working on Your Computer
Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your
personal safety. Unless otherwise noted, each procedure included in this document assumes that the following
conditions exist:
You have performed the steps in Working on Your Computer.
You have read the safety information that shipped with your computer.
A component can be replaced or--if purchased separately--installed by performing the removal procedure in
reverse order.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For
additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/
regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface, such as a connector on the back of the computer.
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a
card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its
pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some
cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs
before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any
connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in this document.
To avoid damaging your computer, perform the following steps before you begin working inside the computer.
1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
3. If the computer is connected to a docking device (docked) such as the optional Media Base or Battery Slice,
undock it.
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable
from the network device.
4. Disconnect all network cables from the computer.
5. Disconnect your computer and all attached devices from their electrical outlets.
5
6. Close the display and turn the computer upside-down on a flat work surface.
NOTE: To avoid damaging the system board, you must remove the main battery before you service the computer.
7. Remove the main battery.
8. Turn the computer top-side up.
9. Open the display.
10. Press the power button to ground the system board.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the display.
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal
surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal
surface to dissipate static electricity, which could harm internal components.
11. Remove any installed ExpressCards or Smart Cards from the appropriate slots.
Turning Off Your Computer
CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your
computer.
1. Shut down the operating system:
In Windows 7:
Click Start , then click Shut Down.
In Windows Vista :
Click Start , then click the arrow in the lower-right corner of the Start menu as shown below, and then
click Shut Down.
In Windows XP:
Click Start Turn Off ComputerTurn Off . The computer turns off after the operating system shutdown
process is complete.
2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not
automatically turn off when you shut down your operating system, press and hold the power button for about 4
seconds to turn them off.
After Working Inside Your Computer
After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before
turning on your computer.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not
use batteries designed for other Dell computers.
1. Connect any external devices, such as a port replicator, battery slice, or media base, and replace any cards, such
as an ExpressCard.
2. Connect any telephone or network cables to your computer.
6
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
3. Replace the battery.
4. Connect your computer and all attached devices to their electrical outlets.
5. Turn on your computer.
7
8
2
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Recommended Tools
The procedures in this document may require the following tools:
Small flat-blade screwdriver
Phillips screwdriver
Small plastic scribe
Removing the Subscriber Identity Module (SIM) Card
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Insert a paper clip into the small hole on the SIM-card holder to release it from the computer.
3. Remove the SIM-card holder from the computer.
9
4. Remove the SIM card from the SIM-card holder.
Installing the SIM Card
1. Place the SIM card into the SIM-card holder.
2. Slide the SIM card holder together with the SIM card into its slot.
3. Follow the procedures in
After Working Inside Your Computer
.
Removing the Security Digital (SD) Card
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Press in on the SD card to release it from the computer. Slide the SD card out of the computer.
Installing the Secure Digital Card
1. Push the SD card into the slot until it clicks into place.
2. Follow the procedures in
After Working Inside Your Computer
.
Removing the Access Panel
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the screw that secures the access panel to the computer.
3. Remove the access panel from the computer.
10
Installing the Access Panel
1. Place the access panel to its original position on the computer.
2. Tighten the screw to secure the access panel to the computer.
3. Follow the procedures in
After Working Inside Your Computer
.
Removing the Wireless Local Area Network (WLAN) Card
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the access panel.
3. Disconnect the antenna cables from the WLAN card and remove the screw that secures the WLAN card to the
computer. Remove the WLAN card from the computer.
Installing the WLAN Card
1. Slide the WLAN card into its slot.
2. Connect the antenna cables according to the color code on the WLAN card.
3. Install the access panel.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the access panel.
3. Use a plastic scribe to pry the battery from the socket and lift the coin-cell battery out of the computer.
11
Installing the Coin-Cell Battery
1. Push the coin-call battery into its slot on the system board.
2. Install the access panel.
3. Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the access panel.
3. Use your fingertips to spread apart the securing clips on each end of the memory module connector until the
memory module pops up and remove the memory module from its connector on the system board by drawing the
module from the system board at 45-degree angle.
Installing the Memory
1. Insert and secure the memory module to the system board.
2. Install the access panel.
3. Follow the procedures in
After Working Inside Your Computer
.
Removing the Keyboard
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the screw that secures the keyboard to the chassis.
12
3. Starting on the right side of the system, use a plastic scribe to pry up the keyboard from the computer.
4. Flip the keyboard over and lay it on the palmrest.
5. Lift the clip to release the keyboard cable and disconnect it from the computer.
13
Installing the Keyboard
1. Connect the keyboard cable to the system board.
2. Place the keyboard back to its original position.
3. Tighten the screw to secure the keyboard to the computer.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Palmrest
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) access panel
b) keyboard
c) display hinge cover
3. Using a plastic scribe pry out the rubber pads that cover the front screws on the base cover.
4. Remove the screws that secure the palmrest to the computer.
14
5. Disconnect the quick launch board cable, the finger print reader cable, and the palmrest cable from the system
board.
6. Disconnect the power LED cable and the LED board cable from the system board.
15
7. Remove the screws that secure the palmrest to the front of the computer.
8. Pry along the edges of the palmrest to release the palmrest.
16
9. Lift the palmrest up and away from the computer.
Installing the Palmrest
1. Starting from the edges of the palmrest, press downwards on the palmrest to engage the tabs on the computer.
2. Tighten the screws to secure the palmrest to the front of the computer.
3. Connect the power LED cable and the LED board cable to the system board.
4. Connect the quick launch board cable, the finger print reader cable, and the palmrest cable to the system board.
5. Tighten the screws to secure the palmrest to the back of the computer.
6. Push the rubber pads to cover the screws on the computer.
7. Install the keyboard.
8. Install the access panel.
9. Follow the procedures in
After Working Inside Your Computer
.
17
Removing the Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) access panel
b) keyboard
c) palmrest
3. Disconnect the battery cable from the system board.
4. Remove the screws that secure the battery to the system board.
5. Remove the battery from the computer.
18
Installing the Battery
1. Place the battery into the battery bay.
2. Replace and tighten the screws that secure the battery to the computer.
3. Connect the battery cable to the system board.
4. Install:
a) palmrest
b) keyboard
c) access panel
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard Drive
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) access panel
b) keyboard
c) palmrest
d) battery
3. Remove the screws that secure the hard drive to the computer.
19
4. Lift the hard drive to disconnect the hard-drive cable.
5. Disconnect the hard-drive cable from the hard drive and remove the hard drive from the computer.
6. Remove the screws that secure the hard-drive bracket to the hard drive and remove the hard drive bracket from it.
Installing the Hard Drive
1. Tighten the screws to secure the hard drive bracket to the hard drive.
2. Connect the hard drive cable to the hard drive and place the hard drive back to its original position on the
computer.
3. Tighten the screws to secure the hard drive to the computer.
4. Install:
a) battery
b) palmrest
c) keyboard
d) access panel
5. Follow the procedures in
After Working Inside Your Computer
.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55

Dell Vostro 3360 User manual

Category
Notebooks
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI