Buffalo 3TB LinkStation Pro User manual

Media Server Update Procedure

LinkStation with firmware 1.20 or later

 Connect the LinkStation to the Internet.

 Turn the LinkStation off, then turn it back on.

 The LinkStation will update the media server automatically.

Alternativ, you may update the media server manually.

 From a computer connected to the same network as the LinkStation, open the LinkStation's

web-based administation interface.

 Navigate to [Extensions]-[Media Server] and click [Update DTCP-IP].

 The LinkStation will update the media server.

DTCP-IP functionality update: Release Notes

Release data: 2010/12/06(Mon)

DTCP-IP version: DTCP-IP_1.40-20101129

--------------------------------------------------------

[Firmware Release Note]

Media Server Update Ver.1.40 (DTCP-IP:1.40-20101129)

- Media Server problems fixed: Movies recorded by HDV or AVCHD Camcorders are now

available to be viewed with some playback devices.

--------------------------------------------------------

This manual is also suitable for

Download PDF