ALGE-Timing 410-e User manual

Type
User manual
Version-E161220
Gearhead 410-E
Seite 2
Inhaltsverzeichnis
1 ROLL MODE ............................................................................................................................... 3
2 TILT MODE ................................................................................................................................. 4
3 PAN MODE ................................................................................................................................. 5
4 Adjust to the finish line ............................................................................................................. 6
As defined by the progress we subject to change the state of technology. You can download the
newest table of contents from our homepage www.alge-timing.com for free.
ALGE Timy manual copyright by:
Alge-Timing
Rotkreuzstrasse 39
A-6890 Lustenau
www.alge-timng.com
Allgemein
Gearhead 410-E
Seite 3
1 ROLL MODE
By pressing the button ROLL, the camera goes from left to right.
Gearhead 410-E
Seite 4
2 TILT MODE
By pressing the button TILT, the camera goes up and down.
Gearhead 410-E
Seite 5
3 PAN MODE
By pressing this button, the camera goes from left to right.
Gearhead 410-E
Seite 6
4 Adjust to the finish line
The camera doesn’t look on the finish line!
Unscrew it a little bit.
Slightly increase the gearhead.
Finish Line
Gearhead 410-E
Seite 7
Rotate the gearhead to left
Fix the screw very gently.
If you fix it too hard the gearhead will be
damaged.
The camera should look to the finish line now.
Finish Line
Gearhead 410-E
Seite 8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

ALGE-Timing 410-e User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI