Caple C2220 User manual

Classic Single Oven

Instruction Manual

C2220

Instruction manual C2220

2 3

Please keep this instruction manual for future reference

Instruction manual C2220

SAFETY INSTRUCTIONS

Read these instructions carefully and completely before

using your appliance, keep it in a convenient place for

reference when necessary.

- This appliance can be used by children aged from 8 years

and above.

- Persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge

must be supervised and given appropriate instruction

concerning the use of the appliance in a safe way and

understand the hazards involved.

- Children shall not play with the appliance.

- Cleaning and user maintenance should not be carried

out by children without supervision.

- The appliance is not intended to be operated by means

of an external timer or separate remote control system.

CONTENTS

SAFETY WARNINGS 3

INSTALLATION WARNINGS 7

ENVIRONMENTAL PROTECTION 10

WARRANTY 10

INSTALLATION 12

OVEN DIMENSIONS 12

ELECTRICAL CONNECTION 13

USING YOUR OVEN 14

COOKING GUIDELINES 14

OVEN FUNCTIONS 15

TOUCH CONTROL ELECTRONIC TIMER 16

TELESCOPIC RUNNERS (OPTIONAL ACCESSORY) 19

SIDE RACKS 19

CARE AND MAINTENANCE 20

REPLACING THE OVEN LIGHTS 21

TROUBLESHOOTING 22

REMOVING AND REVERSING THE OVEN DOOR 23

REMOVING THE GLASS PANELS 25

TECHNICAL FICHE 26

CAPLE CONTACT DETAILS 28

Instruction manual C2220

4 5

Please keep this instruction manual for future reference

Instruction manual C2220

WARNING:

- The appliance and its accessible parts become hot

- during use. Care should be taken to avoid touching

heating elements.

- Children less than 8 years of age should be kept away

unless continuously supervised.

- To prevent ﬁre hazards do not store items on the

- cooking surfaces.

- During use, handles can get hot.

- Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the oven door glass or any other

surface of the appliance as it can scratch the surface

which may result in the glass shattering or permanent

damage to the surface.

- Do not use steam cleaners for cleaning the appliance.

- Ensure the appliance is switched off before replacing the

light to avoid the possibility of electric shock.

CAUTION:

- Accessible parts may be hot when the cooking or grilling

is in use. Young children should be kept away.

- Your appliance is produced in accordance with all

applicable local and international standards

and regulations.

- Maintenance and repair work must be made only

by authorised Caple service technicians. Installation

and repair work that is carried out by unauthorised

technicians may endanger you.

- It is dangerous to alter or modify the speciﬁcations of the

appliance in any way.

- Prior to installation, ensure that the local distribution

conditions (electricity voltage and frequency) and

the requirements of the appliance are compatible.

The requirements for this appliance are stated on the

rating label.

- This appliance is designed only for cooking food and

is intended for indoor use.

- This product is not designed for commercial use, it is

a household appliance only. It is not intended to be

used in:

• Staff kitchen areas in shops, ofﬁces and other working

environments.

• Bed and breakfast type environments.

• By clients in hotels, motels and other residential

type environments.

Instruction manual C2220

6 7

Please keep this instruction manual for future reference

Instruction manual C2220

- Do not try to lift or move the appliance by pulling the

door handle.

- All possible security measures have been taken to ensure

your safety. Since the glass may break, you should be

careful while cleaning to avoid scratching.

- Avoid hitting or knocking on the glass with accessories.

- Ensure that the supply cord is not wedged during the

installation. If the supply cord is damaged, it must

be replaced by a Caple service technician or similarly

qualiﬁed persons in order to prevent a hazard.

- While the oven door is open, do not let children climb on

the door or sit on it.

INSTALLATION WARNINGS

- Do not operate the appliance before it is fully installed.

- The appliance must be installed by an

authorised technician.

- Caple is not responsible for any damage that may

be caused by defective placement and installation by

unauthorised persons.

- When unpacking the appliance, make sure that it is

not damaged during transportation. In the case of any

defect; do not use the appliance and contact your retailer

or Caple Service immediately.

- Materials used for packaging (nylon, staplers, styrofoam

etc) may cause harmful effects to children they should be

disposed of immediately.

- Protect your appliance against atmospheric effects. Do

not expose it to effects such as sun, rain, snow etc.

- The surrounding materials of the appliance (i.e. kitchen

cabinet or furniture) must be able to withstand a

minimum temperature of 120°C.

Instruction manual C2220

8 9

Please keep this instruction manual for future reference

Instruction manual C2220

DURING USAGE

- Before using the oven for the ﬁrst time, heat the empty

oven at max. temperature for 1 hour – removing any

unpleasant smells and smoke caused by working

residues and thermal insulation. Make sure you do this

in a well ventilated area.

- During usage, the outer and inner surfaces of the oven

get hot. While opening the oven door, step back to avoid

the hot steam coming out of the oven as there may be a

risk of burns.

- Do not put ﬂammable or combustible materials in or

near the appliance when it is operating.

- Always use oven gloves to remove and replace food in

the oven.

- Pay close attention to the oven while cooking with solid

or liquid oils as they could potentially catch ﬁre when

oven is hot.

- Never pour water on ﬂames that are caused by oil. Cover

the saucepan or frying pan with its lid in order to choke

the ﬂame and turn the oven off.

- If you know you will not be using the appliance for a

while switch it off from the main supply and unplug it.

- The oven shelves and trays incline when pulled out. Be

careful not to let hot liquid spill over.

- When the door of the oven is open, do not leave

anything on it. It may unbalance your appliance or

damage the door.

- Do not put anything heavy, ﬂammable or ignitable

(nylon, plastic bag, paper or cloth etc) into the oven. This

includes cookware with plastic accessories (e.g. handles).

Do not hang towels, dishcloths or clothes from the

appliance or its handles.

- Do not use the oven for storage purposes.

- Do not touch the appliance with wet hands.

- Do not obstruct the ventilation openings.

- Do not allow supply cords from other small appliances to

come into contact with the oven.

- Before operating the Pyrolytic function, ensure all

internal shelves, trays and side racks are removed.

- Before use, remove all plastic ﬁlms protecting some parts

of the appliance (fascia - panel, parts in stainless

steel, etc)

- Do not use the appliance to heat a room.

- When the appliance is not in use, we recommend you

turn it off, and isolate it from the electrical supply.

DURING CLEANING AND

MAINTENANCE

- Always switch off the appliance from the mains isolating

the electrical supply before any cleaning or maintenance.

- To maintain the efﬁciency and safety of your appliance,

we recommend you always use original spare parts and

to call only our authorised Caple Service agents in case

of need.

Instruction manual C2220

10 11

Please keep this instruction manual for future reference

Instruction manual C2220

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where

facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is

marked according to the European directive on Waste Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. The symbol on the product indicates that this

product may not be treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. Disposal must be carried

out in accordance with local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please

contact your local council, your household waste disposal service or the retailer where you

purchased the product.

WARRANTY

Your new appliance is covered by warranty. The warranty card is enclosed - if it is missing, you

must provide the following information to your retailer in order to receive a replacement: date of

purchase, model and serial number. Registration can also be completed online by visiting

www.caple.co.uk.

Ensure you keep your warranty card safe, you may need to show it to Caple Service together with

proof of purchase.

If you fail to show your warranty card you will incur all repair charges.

Spare parts are only available from Caple Service and spare parts authorised centres.

CE DECLARATIONS OF CONFORMITY

This appliance has been manufactured to the strictest standards and complies with all applicable

legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).

INSTALLATION

IMPORTANT:

ISOLATE YOUR OVEN FROM THE ELECTRICAL SUPPLY BEFORE PERFORMING

INSTALLATION OR MAINTENANCE.

Installation should be carried out according to the instructions by a professionally qualiﬁed

person only.

The manufacturer declines all responsibility for any damage to persons, animals or materials due

to incorrect installation.

FITTING THE APPLIANCE:

Fit the appliance into its surround (beneath a

worktop or above another appliance in a tall

housing) by inserting screws and plastic covers

into the 2 holes (A - ﬁg.3) that can be seen in

the frame of the oven when the door is open.

For the most efﬁcient air circulation, the oven should be

ﬁtted according to the dimensions shown in ﬁg. 1 & 2.

The rear panel of the cabinet must be removed so that air can circulate freely. The panel to which

the oven is ﬁtted should have a gap of at least 70 mm at the rear for ventilation (ﬁg.4 & ﬁg.5).

DIMENSIONS

54 0mm

593mm

578mm

589mm

70mm

589mm

mi n 5 50 mm

56 0mm

55 5mm

25mm

5m m

59 5mm

70 mm

20 mm

54 0mm

593mm

578mm

55 5mm

25mm

5m m

59 5mm

20 mm

11 6mm

DIMENSIONS

54 0mm

593mm

578mm

589mm

70mm

589mm

mi n 5 50mm

56 0mm

55 5mm

25mm

5m m

59 5mm

70 mm

20 mm

54 0mm

593mm

578mm

55 5mm

25mm

5m m

59 5mm

20 mm

11 6mm

Instruction manual

540mm

593mm

578mm

589mm

70mm

589mm

min 550mm

560mm

555mm

25mm

5mm

595mm

70mm

20mm

540mm

593mm

578mm

555mm

25mm

5mm

595mm

20mm

Dimensions

116mm

INSTALLATION

IMPORTANT:

ISOLATE YOUR OVEN FROM THE ELECTRICAL SUPPLY BEFORE PERFORMING

INSTALLATION OR MAINTENANCE.

Installation should be carried out according to the instructions by a professionally

qualiﬁed person only.

The manufacturer declines all responsibility for any damage to persons, animals or

materials due to incorrect installation.

FITTING THE APPLIANCE

Fit the appliance into its surround (beneath a

worktop or above another appliance in a tall

housing) by inserting screws and plastic covers

into the 2 holes (A - ﬁg.3) that can be seen in

the frame of the oven when the door is open.

For the most efﬁcient air circulation, the oven

should be ﬁtted according to the dimensions

shown in ﬁg. 1 & 2.

The rear panel of the cabinet must be removed so that air can circulate freely. The

panel to which the oven is ﬁtted should have a gap of at least 70 mm at the rear

for ventilation (ﬁg.4 & ﬁg.5).

540mm

593mm

578mm

589mm

70mm

589mm

min 550mm

560mm

555mm

25mm

5mm

595mm

70mm

20mm

540mm

593mm

578mm

555mm

25mm

5mm

595mm

20mm

Dimensions

116mm

INSTALLATION

IMPORTANT:

Unplug your oven before

performing installation or maintenance

Installation should be carried out according to the instructions by a

professionally qualified person only.

The manufacturer declines all responsibility for

any damage to persons, animals or materials due to incorrect installation.

Fitting the appliance

Fit the appliance into its surround (beneath a worktop or above

another appliance) by inserting screws and plastic covers into the 2

holes (A - fig.3) that can be seen in the frame of the oven when the door

is open.

For the most efficient air circulation, the oven should be fitted

according to the dimensions shown in fig. 1&2.

The rear panel of the cabinet must be removed so that air can

circulate freely. The panel to which the oven is fitted should

have a gap of at least 70 mm at the rear for ventilation (fig.4 & fig.5).

See below for full dimensional drawings of your oven to help with

installation.

NOTE: where ovens are to be matched with hobs, it is essential

to follow the instructions contained in the manual supplied with

the hob

Plastic cover

Fig.3

Oven dimensions

Fig.2

Fig.1

Fig. 1

Fig. 2

Fig1 Fig2

Instruction manual C2220

12 13

Please keep this instruction manual for future reference

Instruction manual C2220

See below for full dimensional drawings of your oven to help with installation.

For a built-in oven to work well the cabinet must be of the right type.

The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining

furniture is made of veneered wood, the adhesives should be able to withstand a temperature

of 120ºC. Plastic materials or adhesive which cannot withstand this temperature may become

deformed or unstuck.

To comply with safety regulations, once the appliance has been ﬁtted it should not be possible to

make contact with the electrical parts.

All parts which offer protection should be ﬁxed in such a way that they cannot be removed

without the use of a tool.

OVEN DIMENSIONS

Instruction manual

Please keep this instruction manual for future reference

See below for full dimensional drawings of your steam oven to help with

installation.

For a built-in steam oven to work well the cabinet must be of the right type.

The panels of the adjoining furniture should be heat resistant. Particularly when

the adjoining furniture is made of veneered wood, the adhesives should be able

to withstand a temperature of 120ºC. Plastic materials or adhesive which cannot

withstand this temperature may become deformed or unstuck.

To comply with safety regulations, once the appliance has been fitted it should

not be possible to make contact with the electrical parts.

All parts which offer protection should be fixed in such a way that they cannot be

removed without the use of a tool.

PRODUCT DIMENSIONS

Instruction manual

Please keep this instruction manual for future reference

See below for full dimensional drawings of your steam oven to help with

installation.

For a built-in steam oven to work well the cabinet must be of the right type.

The panels of the adjoining furniture should be heat resistant. Particularly when

the adjoining furniture is made of veneered wood, the adhesives should be able

to withstand a temperature of 120ºC. Plastic materials or adhesive which cannot

withstand this temperature may become deformed or unstuck.

To comply with safety regulations, once the appliance has been fitted it should

not be possible to make contact with the electrical parts.

All parts which offer protection should be fixed in such a way that they cannot be

removed without the use of a tool.

PRODUCT DIMENSIONS

540mm

565mm

5mm

555mm

20mm

578mm

540mm

20mm

467mm

593mm

116mm

595mm

5mm

20mm

ELECTRICAL CONNECTION

WARNING: THIS APPLIANCE MUST BE EARTHED

Check that the power rating of the mains supply is suitable for the maximum power of the

appliance as indicated on the rating label.

The fuse rating for this appliance is 20amp.

The appliance is supplied with a mains lead it should be “Hard wired” as follows:

» The “yellow/green” earth wire, which must be connected to a terminal, and has to be

about 10mm longer than the other wire.

» The neutral wire has to be connected to the terminal marked with a letter N.

» The Live wire should only be connected to the terminal marked L.

Mains connection can also be made by ﬁtting a double pole switch with a minimum gap between

the contacts of 3mm, proportionate to the load and complying with the regulations in force.

THE YELLOW/GREEN EARTH WIRE SHOULD NOT BE CONTROLLED BY

THE SWITCH.

When a double pole switch is used for mains supply connection it should be easily accessed, once

the appliance is in position.

IMPORTANT:

The mains supply cable should be positioned so that it is never subjected to temperatures which

are more than 50ºC above ambient temperature.

The electrical safety of the appliance can only be guaranteed when it has been correctly connected

to a properly earthed mains electrical supply, as laid down in the current regulations for

electrical safety.

The manufacturer cannot be held responsible for any damage to persons or objects due to lack of

an earth connection.

The ovens are designed to operate with a mono-phase alternating current of 220-240V, 50Hz.

BEFORE THE INSTALLATION OF THE APPLIANCE, CHECK THE SPECIFICATIONS

ON THE RATING LABEL.

Instruction manual C2220

14 15

Please keep this instruction manual for future reference

Instruction manual C2220

USING YOUR OVEN

CONTROL PANEL:

OVEN FUNCTIONS

1. Function control knob

2. Temperature control knob

3. Plus/Minus (+/-) touch control buttons

4. Timer touch control button

5. Temperature indicator

6. Display screen

COOKING GUIDELINES

» Set the function for the type of cooking required.

» Preheat the oven, setting the thermostat to the required temperature. Once the oven has

heated to the selected temperature, the orange temperature indicator light will go out. You

can now insert the food.

» This same light will appear again automatically during operation of the oven to indicate

that the heating elements are on.

NOTE:

Remove the drip tray when using the oven for fan cooking, roasting etc. The tray should be left in

place only when using the grill, as its purpose is to catch falling droplets of fat. Food should be

placed in oven dishes with raised edges and positioned centrally under the grill.

C2234BK

1. 2.

3. 4. 3.

LIGHT Internal oven light.

TURBO DEFROST

The air at ambient temperature is distributed inside the oven to speed up

defrosting time.

FAN HEAT

Both the fan and the circular heating element operate together. The fan evenly

distributes the hot air (between 50˚C and MAX) inside the oven. This is ideal

for cooking several types of food e.g. meat and ﬁsh, at the same time without

affecting taste and smell. It is also ideal for delicate pastries.

GRILL

This function can be used for gratins and grilling food. When grilling, the oven

door must be closed.

TURBO GRILL

This function can be used for gratins and grilling food quicker than other grill

functions. When grilling, the oven door must be closed.

Instruction manual C3371

Please keep this instruction manual for future reference

USING YOUR OVEN

Control panel

C3371 - Instruction Manual.indd 16 07/12/2017 10:13

MAX

1. Function control knob

2. Temperature control knob

3. Plus/Minus (+/-) touch control buttons

4. Timer touch control button

5. Temperature indicator

6. Display screen

PPLLEEAASSEE CCAANN YYOOUU AADDDD NNUUMMBBEESS AANNDD LLIINNEESS TTOO TTHHEE CCOONNTTRROOLL PPAANNEELL

TTOO MMAATTCCHH TTHHEE BBEELLOOWW

CONVENTIONAL HEAT

Both the lower and upper heating elements operate together.

This is the traditional cooking method, perfect for roasting joints, cooking pastry and

baking cakes.

TURBO DEFROST

The air at ambient temperature is distributed inside the oven to speed up defrosting

time.

OOvveenn ffuunnccttiioonnss

LIGHT

Internal oven light

Instruction manual C3371

Please keep this instruction manual for future reference

USING YOUR OVEN

Control panel

C3371 - Instruction Manual.indd 16 07/12/2017 10:13

MAX

1. Function control knob

2. Temperature control knob

3. Plus/Minus (+/-) touch control buttons

4. Timer touch control button

5. Temperature indicator

6. Display screen

PPLLEEAASSEE CCAANN YYOOUU AADDDD NNUUMMBBEESS AANNDD LLIINNEESS TTOO TTHHEE CCOONNTTRROOLL PPAANNEELL

TTOO MMAATTCCHH TTHHEE BBEELLOOWW

CONVENTIONAL HEAT

Both the lower and upper heating elements operate together.

This is the traditional cooking method, perfect for roasting joints, cooking pastry and

baking cakes.

TURBO DEFROST

The air at ambient temperature is distributed inside the oven to speed up defrosting

time.

OOvveenn ffuunnccttiioonnss

LIGHT

Internal oven light

Instruction manual C3371

Please keep this instruction manual for future reference

FAN HEAT

Both the fan and the circular heating element operate together.

The fan evenly distributes the hot air (between 50˚C and MAX) inside the oven. This

is ideal for cooking several types of food i.e. meat and ﬁsh at the same time without

affecting taste and smell. It is also ideal for delicate pastries.

TURBO BASE HEAT

Both the fan and the lower heating element operate together.

The air which is heated by the lower heating element is circulated by the fan helping

to distribute the heat. This function can be used for sterilising glass jars.

ECO GRILL

This function can be used for grilling and gratinating small quantities of food. This

function can be used with the door closed.

FULL GRILL

This function can be used for grilling and gratinating food. When grilling, the oven

door must be closed.

TURBO GRILL

This function can be used for grilling and gratinating food quicker than other grill

functions. When grilling, the oven door must be closed.

C3371 - Instruction Manual.indd 17 07/12/2017 10:13

TURBO CONVENTIONAL HEAT

This function uses both top and bottom heating elements simultaneously. The

heat produced by these is then circulated around the oven by the fan to help

distribute the heat more evenly.

Instruction manual C3371

Please keep this instruction manual for future reference

FAN HEAT

Both the fan and the circular heating element operate together.

The fan evenly distributes the hot air (between 50˚C and MAX) inside the oven. This

is ideal for cooking several types of food i.e. meat and ﬁsh at the same time without

affecting taste and smell. It is also ideal for delicate pastries.

TURBO BASE HEAT

Both the fan and the lower heating element operate together.

The air which is heated by the lower heating element is circulated by the fan helping

to distribute the heat. This function can be used for sterilising glass jars.

ECO GRILL

This function can be used for grilling and gratinating small quantities of food. This

function can be used with the door closed.

FULL GRILL

This function can be used for grilling and gratinating food. When grilling, the oven

door must be closed.

TURBO GRILL

This function can be used for grilling and gratinating food quicker than other grill

functions. When grilling, the oven door must be closed.

C3371 - Instruction Manual.indd 17 07/12/2017 10:13

TURBO CONVENTIONAL HEAT

This function uses both top and bottom heating elements simultaneously. The

heat produced by these is then circulated around the oven by the fan to help

distribute the heat more evenly.

C2234BK

Instruction manual C2220

16 17

Please keep this instruction manual for future reference

Instruction manual C2220

TOUCH CONTROL ELECTRONIC TIMER

NOTE:

The oven only operates when the time has been set.

HOW TO USE THE CLOCK FUNCTION

» When a function has been selected, the corresponding function indicator flashes for

approx. 5 seconds. During this time the desired times can be set using + or - button.

» When the desired time has been set, the function indicator flashes for approx. another 5

seconds. After that the function indicator is then lit. The set time begins to run.

» Press any of the buttons to stop the acoustic signal.

» The desired oven function and temperature can be selected before or after the clock

functions of cook time

and end time

are set.

» When the cooking time has ended, turn the oven function and temperature dial back to the

OFF position.

COUNTDOWN

» Press button repeatedly, until the countdown indicator flashes.

» Using the + or - button, set the required countdown (max. 2 hours 30 minutes).

» After approx. 5 seconds, the display shows the remaining time.

» The countdown indicator will light up.

» When the time has elapsed, the function indicator flashes and an acoustic signal sounds

for 2 minutes. Press any button to switch off the signal.

COOK TIME

» Press selection button repeatedly, until the cook time indicator flashes.

» Using the + or _ button, set the required cooking time.

» After approx. 5 seconds, the display returns to the current time. The cook time indicator

will light up.

» When the time has elapsed, the cook time indicator will flash, an acoustic signal will sound

for 2 minutes and the oven will switch itself off. Press any button to switch the signal and

the programme off.

SETTING AND CHANGING THE TIME

» When the appliance has been connected to the electrical

supply or when there has been a power cut, the time indicator

flashes automatically.

» To change the time that has already been set, press the time

button repeatedly, until the time indicator

flashes.

» Set the current time using the + or - button. After approx. 5

seconds, the flashing stops and the clock display the time of

day set.

» The appliance is now ready to use.

» The time can only changed if neither of the automatic functions

(cook time or end time

) has been set.

TIMER FUNCTIONS

Countdown

» To set a countdown, a signal sounds after the time has

elapsed.

» This function does not affect the operation of the oven.

Cook Time

» To set how long the oven is be in use.

End Time

» To set when the oven is to switch off again.

Time

» To set, change or check the time.

Instruction manual C3371

Please keep this instruction manual for future reference

TOUCH CONTROL ELECTRONIC TIMER

Note:

The oven only operates when the time has been set.

When the appliance has been connected to

the electrical supply or when there has

been a power cut, the time indicator

ﬂashes automatically.

To change the time that has already been

set, press the time button repeatedly,

until the time indicator ﬂashes.

Set the current time using the or button.

After approx. 5 seconds, the ﬂashing stops

and the clock displays the time of day set.

The appliance is now ready to use.

The time can only be changed if neither of

the automatic functions (cook time or end

time ) has been set.

TIMER FUNCTIONS

Countdown

To set a countdown, a signal sounds after the

time has elapsed.

This function does not affe

ct the operation of

the oven.

Cook time To set how long the oven is to be in use.

End time To set when the oven is to switch off again.

Time To set, change or check the time.

C3371 - Instruction Manual.indd 21 07/12/2017 10:13

SETTING AND CHANGING THE TIME

Instruction manual C2220

18 19

Please keep this instruction manual for future reference

Instruction manual C2220

END TIME

» Press selection button repeatedly, until the end time indicator flashes.

» Using the + or - button, set the required switch-off time.

» After approx. 5 seconds, the display returns to the current time.

» The end time indicator will light up.

» When the time has lapsed, the function indicator will flash, an acoustic signal will sound

for 2 minutes and the oven will switch itself off. Press any button to switch the signal and

the programme off.

COOK TIME AND END TIME

» Cook time and end time can be used simultaneously, if you want the oven to be

automatically switched on and off at a specific time.

» Using the cook time function set the period of time that the dish requires to cook.

For example, 1 hour.

» Using the end time function , set the time at which the dish is to be ready.

In this example, 14:05.

» The cook time and end time light up and the time is shown in the display.

In this example, 12:05.

» The oven will automatically switch itself on at the appropriate time as calculated -

in this example, at 13:05 - and will switch itself off when the cooking time set has elapsed.

In this example, at 14:05.

Telescopic runners

To assemble the telescopic runners:

- Remove the side racks

- Choose which shelf to use with the telescopic runner. Pay attention to the

direction in which the runner is to be extracted, position joint ‘B’ and joint ‘C’

on the frame (see Fig.1).

- Secure the two side racks with the guide rails using the holes provided on the

oven walls (see Fig. 3).The holes for the left rack are situated at hole F1, F2 and

the right rack at hole D1, D2.

- Finally, re-fit the side rack

Fig.1

SSiiddee rraacckkss aanndd CCaattaallyyttiicc lliinneerrss

To install, align the 2 holes in the catalytic liners with the 2 steel clips in the side of

the oven cavity. Once aligned, attach side racks by pushing these onto the furthest

steel clip and then clicking the other end onto the closest steel clip.

This will secure the catalytic liners to the sides of the oven. To remove, unclip the side

racks from the side of the oven, and remove the catalytic liners.

Visit our Caple website to view a 'How to video' on this. wwwwww..ccaappllee..ccoo..uukk

Figure 1.

NOTE:

Telescopic runners are optional accessories and are not included.

SIDE RACKS

Attach the side racks by pushing these onto the furthest steel clip and then clicking the other end

onto the closest steel clip.

Visit our Caple website to view a ‘How to video’ on this. www.caple.co.uk

Telescopic runners

To assemble the telescopic runners:

- Remove the side racks

- Choose which shelf to use with the telescopic runner. Pay attention to the

direction in which the runner is to be extracted, position joint ‘B’ and joint ‘C’

on the frame (see Fig.1).

- Finally, re-fit the side racks as per below instructions.

Fig.1

SSiiddee rraacckkss

Attach the side racks by pushing these onto the furthest steel clip and then clicking

the other end onto the closest steel clip.

Visit our Caple website to view a 'How to video' on this. wwwwww..ccaappllee..ccoo..uukk

Figure 2.

TELESCOPIC RUNNERS (OPTIONAL ACCESSORY)

To assemble the telescopic runners:

» Remove the side racks (see section below and Fig.2)

» Choose which shelf to use with the telescopic runner.

Paying attention to the direction in which the runner is

to be extracted, position joint ‘B’ and joint ‘C’ on the

frame (see Fig.1).

» Squeeze the bars together slightly and clip either

end of the telescopic runners on to the side racks.

» Finally, reﬁt the side racks (See below and Fig.2)

Instruction manual C2220

20 21

Please keep this instruction manual for future reference

Instruction manual C2220

CARE AND MAINTENANCE

IMPORTANT:

Unplug your oven before cleaning, or performing maintenance!

To extend the life of your oven, it must be cleaned frequently, keeping in mind the following:

DO NOT USE STEAM EQUIPMENT TO CLEAN THE APPLIANCE

» o protect against the risk of electrical shock, do not immerse the unit, cord or plug in water

or other liquid, or sprinkle water to clean the appliance!

» Don’t clean the appliance when it is still hot! The inside and external surfaces of the oven

should preferably be cleaned with a damp cloth when it has cooled down.

» Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper towel or

cloth.

» If you use your oven for an extended period of time, condensation may form.

» Dry it using a soft cloth.

» There is a rubber seal surrounding the oven opening which guarantees its perfect

functioning. Check the condition of this seal on a regular basis. If necessary, clean it and

avoid using abrasive products or objects to do so. Should it become damaged, please

contact Caple service. We recommend you avoid using the oven until it has been repaired.

» Never line the oven bottom with aluminium foil, as the consequent accumulation of heat

could compromise the cooking and even damage the enamel.

» Clean the glass door using a damp cloth and dry it with a soft cloth.

» Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass

since they can scratch the surface, which may result in shattering of the glass.

REPLACING THE OVEN LIGHT

» Switch off your oven at the mains.

» Remove the glass cover, by unscrewing this from the light socket.

» Remove the light bulb by pulling it from the light socket and replace it with a similar bulb.

» Remount the glass cover and reconnect the appliance to the power supply.

Halogen light characteristics

» Voltage: AC220V-240V

» Wattage: 25W

» Cap: G9

DO NOT TOUCH the light bulb directly with your hands.

WARNING:

Ensure that the appliance is disconnected from the mains before replacing the light to avoid the

possibility of electric shock.

REPLACING THE OVEN LIGHT

- Switch off your oven at the mains.

- Remove the glass cover, by unscrewing this from the light socket.

- Remove the light bulb by pulling it from the light socket and replace it with a similar bulb.

- Remount the glass cover and reconnect the appliance to the power supply.

DO NOT TOUCH the light bulb directly with your hands.

WARNING:

Ensure that the appliance is disconnected from the mains before replacing the

lamp to avoid the possibility of electric shock.

Instruction manual

Please keep this instruction manual for future reference

REPLACING THE OVEN LAMPS

- Switch off your oven at the mains.

- Unscrew the glass cover attached to the lamp-holder

- Remove the light bulb and replace it with a similar one

- Remount the glass cover and reconnect the appliance to the power supply.

DO NOT TOUCH the light bulb directly with your hands.

WARNING:

Ensure that the appliance is disconnected from the mains before replacing the

lamp to avoid the possibility of electric shock.

Halogen lamp characteristics

- Voltage: AC220V-240V

- Wattage: 25W

- Cap: G9

HHaallooggeenn llaammpp cchhaarraacctteerriissttiiccss

- Voltage: AC220V-240V

- Wattage: 25W

- Cap: G9

Telescopic runners

To assemble the telescopic runners:

- Remove the side racks

- Choose which shelf to use with the telescopic runner. Pay attention to the

direction in which the runner is to be extracted, position joint ‘B’ and joint ‘C’

on the frame (see Fig.1).

- Secure the two side racks with the guide rails using the holes provided on the

oven walls (see Fig. 3).The holes for the left rack are situated at hole F1, F2 and

the right rack at hole D1, D2.

- Finally, re-fit the side rack

Fig.

Side racks and Catalytic liners

To install, align the 2 holes in the catalytic liners with the 2 steel clips in the side of

the oven cavity. Once aligned, attach side racks by pushing these onto the furthest

steel clip and then clicking the other end onto the closest steel clip.

This will secure the catalytic liners to the sides of the oven. To remove, unclip the side

racks from the side of the oven, and remove the catalytic liners.

Visit our Caple website to view a 'How to video' on this. www.caple.co.uk

Light

CAVITY

Instruction manual C2220

22 23

Please keep this instruction manual for future reference

Instruction manual C2220

TROUBLESHOOTING REMOVING AND REVERSING THE OVEN DOOR

USEFUL NOTES FOR BAKING

In the following table are some indicative hints for baking:

TROUBLES SOLUTION

The oven does not operate

» Check it is switched on at the mains

» There has been a power cut

» The time is not set

The oven is not heating The thermostat is not turned to a temperature

The interior light does not illuminate

» Check the product is connected to the electrical supply and is

switched on

» Replace the bulb

Lower and upper parts of the oven

are not cooking evenly

Control the shelf location, cooking period and temperatures

according to the manual

FAULTS CAUSES REMEDIES

The upper crust is dark and the

lower part too pale

Not enough heat from the bottom

» Use the natural convection position

» Use deeper cake tins

» Lower the temperature

» Put the cake on a lower shelf

The lower part is dark and the

upper crust too pale

Excessive heat from the bottom

» Use the natural convection position

» Use lower side tins

» Lower the temperature

» Put the cake on a higher shelf

The outside is too cooked and

the inside not cooked enough

Too high temperature

» Lower the temperature and increase the

cooking time

The outside is too dry even

though it is the right colour

Too low temperature

» Increase the temperature and reduce

the cooking time.

PROCEDURE DESCRIPTION IMAGE

1 Open the door

Undeo screw (1) with a

screwdriver. Push the screw (1)

down the elongated screw hole to

lower the ﬁxing pin and release

the door, and then pull the door

out from the upper hinge.

Lift the door out from the lower

hinge.

The door is then completely

removed.

Procedure Description Image

REMOVING AND REVERSING

THE OVEN DOOR

Open the door

Undo screw(1) with a

screwdriver. Push the screw(1)

down the elongated screw hole

to lower the fixing pin and release

the door, and then pull the door

out from the upper hinge.

Lift the door out from the

lower hinge.

The door is then completely

removed.

Procedure Description Image

REMOVING AND REVERSING

THE OVEN DOOR

Open the door

Undo screw(1) with a

screwdriver. Push the screw(1)

down the elongated screw hole

to lower the fixing pin and release

the door, and then pull the door

out from the upper hinge.

Lift the door out from the

lower hinge.

The door is then completely

removed.

Procedure Description Image

REMOVING AND REVERSING

THE OVEN DOOR

Open the door

Undo screw(1) with a

screwdriver. Push the screw(1)

down the elongated screw hole

to lower the fixing pin and release

the door, and then pull the door

out from the upper hinge.

Lift the door out from the

lower hinge.

The door is then completely

removed.

Procedure Description Image

REMOVING AND REVERSING

THE OVEN DOOR

Open the door

Undo screw(1) with a

screwdriver. Push the screw(1)

down the elongated screw hole

to lower the fixing pin and release

the door, and then pull the door

out from the upper hinge.

Lift the door out from the

lower hinge.

The door is then completely

removed.

If the problem still persists, please contact Caple service for assistance:

T - 0117 938 7420

E - service@caple.co.uk

Instruction manual C2220

24 25

Please keep this instruction manual for future reference

Instruction manual C2220

1. Pry open the inner glass panel use a ﬂat head

screwdriver in the slots as shown above.

3. Unscrew the 6 screws on the door frame.

5. Loosen the 4 ﬁxing pieces on the

glass bracket.

2. Remove the inner glass.

4. Remove the door frame.

6. Remove the middle glass panel.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

PROCEDURE DESCRIPTION IMAGE

Push screw (1) back up the

elongated hole to raise the ﬁxing

pin, and tighten the screw to

secure it into place. Unscrew

screw (2) and move it down

the elongated hole to lower

the ﬁxing pin.

The door is now ready to reverse

and reattach to the oven. Once

the door is reversed, screw (1) will

now be in the lower position, and

screw (2) in the upper position.

Insert the lower ﬁxing pin (5) into

the lower hinge support (6).

Align the upper ﬁxing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the ﬁxing

pin in the hinge support. Now

tighten the screw (2) to secure

this into position.

9 The door reversal is now complete.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

The door is now ready to

reverse and reattach to the

oven.

Once the door is reversed, screw

(1) will now be in the lower

position, and screw (2) in the

upper position.

Insert the lower fixing pin (5) into

the lower hinge support (6).

The door reversal is now

complete.

Push screw (1) back up the

elongated hole to raise the

fixing pin, and tighten the screw

to secure it into place. Unscrew

screw (2) and move it down the

elongated hole to lower the

fixing pin.

Align the upper fixing pin with

the upper hinge support (4), and

then move the screw (2) up the

elongated hole to raise the

fixing pin into the hinge support.

Now tighten the screw (2) to

secure this into position.

REMOVING THE GLASS PANELS

The disassemble the oven door, to clean the glass panels, please follow the below instructions, and

reverse to reassemble.

panel

Loosen

open glass panel using a flat head

in the slots as shown above.

Uns

RREMOVING THE GLASS PANELS

TToo ddiissaasssseemmbbllee tthhee oovveenn ddoooorr,, ttoo cclleeaann tthhee ggllaassss ppaanneellss,, pplleeaassee ffoollllooww tthhee bbeellooww iinnssttrruuccttiioonnss,,

aanndd rreevveerrssee ttoo rreeaasssseemmbbllee..

panel

Loosen

open glass panel using a flat head

in the slots as shown above.

Uns

RREMOVING THE GLASS PANELS

TToo ddiissaasssseemmbbllee tthhee oovveenn ddoooorr,, ttoo cclleeaann tthhee ggllaassss ppaanneellss,, pplleeaassee ffoollllooww tthhee bbeellooww iinnssttrruuccttiioonnss,,

aanndd rreevveerrssee ttoo rreeaasssseemmbbllee..

panel

Loosen

open glass panel using a flat head

in the slots as shown above.

Uns

RREMOVING THE GLASS PANELS

TToo ddiissaasssseemmbbllee tthhee oovveenn ddoooorr,, ttoo cclleeaann tthhee ggllaassss ppaanneellss,, pplleeaassee ffoollllooww tthhee bbeellooww iinnssttrruuccttiioonnss,,