WATCH IT – THIS VIBE BITES!
The main controls on your Viper pedal are the DEPTH, SPEED and LEVEL
knobs, while the MODE button lets you select the basic character of your
vibe.
DEPTH controls the overall strength of the vibe effect. Start with a lower
setting for a nice, subtle effect, and turn it up to send your sound whirl-
ing around the room.
The SPEED knob lets you adjust how fast or slow your sound modulates
– no matter what the depth, or what mode you’re in.
LEVEL - lets you adjust the overall output of your Viper pedal.
Use the MODE button to switch between the two classic vibe modes
– a rotating speaker effect and a subtler vibrato sound.
Trim to customize your sound. The trim dial on the back of the unit
(accessible using a flat-head screwdriver) lets you shape the intensity
and character of your vibe sound. Experiment to get just the vibe you’re
looking for.
TECHNICAL SPECS
Input Impedance@1KHz 880 KOhm
Output Impedance@1KHZ 24 Ohm
Power supply 12V DC
Minimum Power supply Voltage 10,8V DC
Maximum Power supply Voltage 12,5V DC
Current Draw @ 12V DC 162 mA
Maximum Input signal Vp/p 1,5Vp/p
External connectors Input Jack. Output Jack, 12V DC Jack
Controls On/Off, Level, Depth, Speed, Mode
Depth 120 mm
Width 100 mm
Height 55 mm
Weight (excl. battery) 0,594 kg