Clinton Electronics CE-R4S User manual

Category
Digital Video Recorders (DVR)
Type
User manual
DVR User Manual
Shadow • Pro • HD-SDI • Hybrid
Actual product may vary slightly from the images shown in this manual.
Clinton reserves the right, without notification, to make changes in product design & specification.
1
Warning & Compliance
Important Safeguards
Hardware
Shadow Series
Pro Series
HD Series
Hybrid Series
Basic DVR Connection
Control Overview
Mouse & Jog Wheel
IR Remote Control
Login / Log-Out
Live View Layout
Menu Icons Explained
Multiplex Views
Menu Screens Explained
Cameo Menu
Setup Menu
General Setup Menu
System
Date/Time
Health Check
Alarm Out
Disk Setup
Install
Check / USB
RAID
Monitor
Account
Configuration
Shutdown
Camera Menu
Camera
PTZ
Spot
Sequence
Private Zone
Event Menu
Motion
Input
Action
Event Menu (continued)
Alarm In
Video Loss
System
Warning
Disk
Email
Display
Record Menu
Resolution
Schedule
Typical
Custom
Event
Audio
Manual
Network Menu
Network
Ethernet
Client
Serial (RS-232 / RS-485)
DDNS
Email
Net Frame
Info Menu
System Log
Status
Version
Search Menu
Search Screen Layout
Search Screen Menu Icons
Playback / Quick Search
Calendar Search
Event Search
Overlapped List
Museum Search
Go to First / Go to Last
Panorama / Preview
Backup Menu
Backup
View Saved Video
Web Viewer
CEC Connect App
Port Forwarding Basics
DDNS Setup
Firmware Update
TABLE OF CONTENTS
2
3
4-7
8-9
10-11
12
13
14
15
16
17
18
19
20
21-23
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
45
46
46
47
48
49
50
50
51
52
53
54
55
56-57
58
60
61
62
64
65
66
67
68
69
70-71
72
73
75
76
77-80
81-86
87
88-89
90
2
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate
the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
WARNING & COMPLIANCE
RoHS
This directive restricts the use of six hazardous materials in the manufacture of various type of electronic
and electrical equipment.
FCC Compliant (USA)
This device has been tested and found to comply with the limits of Class A computing device pursuant
to part 15 of the FCC rules.
UL Listed
UL Listing means that UL has tested representative samples of the product and determined that it meets
UL’s requirements. These requirements are based primarily on UL’s published and nationally recognized
Standards for Safety.
CE (Europe)
By axing the CE marking, the manufacturer assures that the item meets all the essential requirements
of all applicable EU directives.
P S
E
PSE (Japan)
The purpose of the Electrical Appliance and Material Safety Law is to prevent hazards and disturbances
resulting from electrical appliances.
BEFORE ATTEMPTING TO OPERATE THIS PRODUCT, PLEASE READ THE
USER’S MANUAL CAREFULLY
3
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not
use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approval
of the manufacturer as such additions may result in the risk of fire,
electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Accessories
Do not place this equipment on an unstable cart, stand or table. The
equipment may fall, causing serious injury to a child or adult, and
serious damage to the equipment. Wall or shelf mounting should
follow the manufacturer’s instructions, and should use a mounting kit
approved by the manufacturer.
7. Power Sources
This equipment should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of
power, please consult your equipment dealer or local power company.
8. Power Cords
Operator or installer must remove power and communications
connections before handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the cable system. This
will prevent damage to the equipment due to lightning and power-line
surges.
10. Overloading
Do not overload wall outlets and extension cords as this can result in
the risk of fire or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment as
they may touch dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the
equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing
to qualified service personnel.
13. Damage Requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have fallen into the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following the
operating instructions, adjust only those controls that are covered by
the operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the equipment to its normal operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance —
this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the
service technician to perform safety checks to determine that the
equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualified service person and
should conform to all local codes.
17. Correct Batteries
Warning: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
18. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specified so that the customer and
installer may determine a suitable maximum operating environment
for the equipment.
19. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than
room ambient. Therefore, consideration should be given to installing
the equipment in an environment compatible with the manufacturer’s
maximum rated ambient temperature (Tmra).
20. Reduced Air Flow
Installation of the equipment in the rack should be such that the
amount of airow required for safe operation of the equipment is not
compromised.
21. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous
condition is not caused by uneven mechanical loading.
22. Circuit Overloading
Consideration should be given to connection of the equipment to
supply circuit and the eect that overloading of circuits might have on
over current protection and supply wiring. Appropriate consideration
of equipment nameplate ratings should be used when addressing this
concern.
23. Reliable Earthing (Grounding)
Reliable grounding of rack mounted equipment should be maintained.
Particular attention should be given to supply connections other than
direct connections to the branch circuit (e.g., use of power strips).
IMPORTANT SAFEGUARDS
4
BACK
FRONT
1
1 5
2
3
4
6
43
2 5
7
8
9
10
11
HARDWARE OVERVIEW > Shadow Series 4-Ch
Late 2015 960H Version
1. BNC Camera Inputs
2. BNC Video Output - MAIN or SPOT
*MAIN or SPOT configured in DVR Settings
3. HDMI Video Output - MAIN
4. VGA Video Output - MAIN
5. RCA Audio Inputs
6. RCA Audio Output
7. RJ45 Network Connection
8. USB Port - Mouse
9. RS485
10. DC12V Power Input
11. Alarm Inputs/Outputs
1. USB Port - for Firmware Update and/or Video Backup
2. Power Indicator LED
3. Recording Indicator LED
4. Network Indicator LED
5. IR Sensor for Remote
5
BACK
FRONT
SIDE
1 3
1 5
2
3
4
5
6
82 4 6
7
HARDWARE OVERVIEW > Shadow Series 4-Ch
D1 (704x480) Version
1. DC12V Power Input
2. RCA Video Output - MAIN
3. HDMI Video Output - MAIN
4. RJ45 Network Connection
5. BNC Camera Inputs
6. Sensor/Ground/RS485/Alarm/Audio Connections
7. Connection Diagram
8. VGA Video Output - MAIN
1. Power Indicator LED
2. HDD Indicator LED
3. Recording Indicator LED
4. Network Indicator LED
5. IR Sensor for Remote
6. USB Ports:
Top - for Firmware Update and/or Video Backup
Bottom - for Mouse
6
HARDWARE OVERVIEW > Shadow Series 8/16-Ch
Late 2015 960H Version
AUDIO IN
ALARM
AUDIO IN (2-16)
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
IN1
CH16
BACK (16-Ch Shown)
FRONT
1
1
2
3
4
2 3 5 10
4 7 9 12
6 8 11
1. Audio Input (Channels 2-16, uses RCA to Multi-Pin Plug Adapter)
2. BNC Camera Inputs
3. BNC Video Output - MAIN or SPOT
*MAIN or SPOT configured in DVR Settings
4. HDMI Video Output - MAIN
5. RCA Audio Input (Channel 1)
6. RCA Audio Output
7. VGA Video Output - MAIN
8. RJ45 Network Connection
9. USB Port - for Mouse
10. Alarm Connection
11. RS485
12. DC12V Power Input
1. USB Ports:
Top - for Firmware Update and/or Video Backup
Bottom - for Mouse
2. Recording Indicator LED
3. Network Indicator LED
4. IR Sensor for Remote
7
HARDWARE OVERVIEW > Shadow Series 8/16-Ch
D1 (704x480) Version
VGAHDMI
DC+12V/5A NETWORK
MAIN
SPOT
CAMERA INPUTS
AUDIO
SENSOR
RS
485
ALARM
VIN
NO
BACK
FRONT
1
2
3
4
3 5 9
1 4 7
2 6 8
1. DC12V Power Input
2. RJ45 Network Connection
3. RCA Video Output - Main
4. RCA Video Output - Spot
5. Camera Inputs (uses BNC to Multi-Pin Plug Adapter)
6. HDMI Video Output - Main
7. VGA Video Output - Main
8. Sensor/Audio/RS485/Alarm Connections
9. Connection Diagram
1. USB Ports:
Top - for Firmware Update and/or Video Backup
Bottom - for Mouse
2. Recording Indicator LED
3. Network Indicator LED
4. IR Sensor for Remote
8
eSATA
CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
VIDEO
OUT IN
AUDIO
OUT IN
CH1
AIN1 AIN2 AIN3 AIN4 AIN5 AIN6 AIN7 AIN8 AIN9 AIN10 AIN11 AIN12 AIN13 AIN14 AIN15 AIN16
CH2
SPOT 1MAIN SPOT SPOT 2
ALARM
IN OUT
ALARM
INOUT
RS-485
HARDWARE OVERVIEW > Pro Series
960H - 3 Spot Monitor Version
BACK (16-Ch Shown)
FRONT
1 6
1 2
7 8
3 5 7 9 10 12
4 6 8 11
1. BNC Camera Inputs
2. BNC Camera Loop-Out/Outputs
3. RCA Audio Inputs
4. RCA Audio Output
5. Alarm Inputs/Outputs
6. BNC Video Out - SPOTS
7. BNC Video Out - MAIN or SPOT
8. RJ45 Network Connection
9. USB Port - for Mouse
10. RS485 & Alarm Inputs/Outputs
11. DC12V Power Input
12. eSATA Port
1. USB Ports:
Top - for Firmware Update and/or Video Backup
Bottom - for Mouse
2. Power Indicator LED
3. Internal Fan Indicator LED
4. Recording Indicator LED
5. Network Indicator LED
6. IR Sensor for Remote
7. CD-R/DVD-R Disc Drive
8. Disc Drive Eject Button
2
5
4
3
9
eSATA II
RS485
VGA
RS232
WAN
VIDEO OUT
VIDEO IN
MAIN SPOT1
SPOT2 SPOT3
CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11
CH12 CH13 CH14 CH15 CH16
CH1 CH2
VIDEO OUT
HDMIAUDIO
ALARM OUT ALARM IN
HARDWARE OVERVIEW > Pro Series
D1 - 3 Spot Monitor Version
BACK (16-Ch Shown)
FRONT
1 6
2
7 8
3 75 9 11 13 15
64 8 10 12 14
1. BNC Camera Inputs
2. BNC Camera Loop-Out/Outputs
3. BNC Video Out - MAIN
4. BNC Video Out - SPOTS
5. Power ON/OFF Switch
6. Power Input
7. Alarm Output
8. Audio Input (uses RCA to Multi-Pin Plug Adapter)
9. Alarm Input
10. HDMI Video Out - MAIN
11. RS232 Connection
12. VGA Video Out - MAIN
13. RS485 Connection
14. eSATA Port
15. RJ45 Network Connection
1. USB Ports:
Top - for Firmware Update and/or Video Backup
Bottom - for Mouse
2. Power Indicator LED
3. Internal Fan Indicator LED
4. Recording Indicator LED
5. Network Indicator LED
6. IR Sensor for Remote
7. CD-R/DVD-R Disc Drive
8. Disc Drive Eject Button
2
5
4
3
1
10
HD-SDI INPUTSMIC1 SPK. VGAeSATA
CH1 CH2 CH3 CH4
HARDWARE OVERVIEW > HD Series 4-Ch
BACK
FRONT
1 3 5 7
2 4 6 8
1. RCA Audio Input
2. RCA Audio Output
3. DC12V Power Input
4. RJ45 Network Connection
5. eSATA Port
6. HDMI Video Out - MAIN
7. VGA Video Out - MAIN
8. BNC Camera Inputs (HD-SDI)
9. Sensor / Alarm / Audio / RS485 Connections
9
1
2
3
4
1. USB Ports:
Top - for Firmware Update and/or Video Backup
Bottom - for Mouse
2. Recording Indicator LED
3. Network Indicator LED
4. IR Sensor for Remote
For use with HD-SDI cameras only.
Standard/Analog cameras will not
function with this DVR.
11
eSATA
RS232
HDMI OUT
AUDIO ALARM IN ALARM OUTRS-485
MAIN
SDI OUT
SPOT SPOT SDI CH1 SDI CH2 SDI CH3 SDI CH4 SDI CH5 SDI CH6 SDI CH7 SDI CH8
SDI IN
SDI CH9 SDI CH10 SDI CH11 SDI CH12 SDI CH13 SDI CH14 SDI CH15 SDI CH16VGA
NETWORK
HARDWARE OVERVIEW > HD Series 16-Ch
BACK
FRONT
1 6
7 98
1 3 7 9
2 6 8
1. Power Input
2. Power ON/OFF Switch
3. RJ45 Network Connection
4. eSATA Port
5. RS232 Connection
6. VGA Video Out - MAIN
7. HDMI Video Out - MAIN top, SPOT bottom
8. BNC Video Out - SPOT (HD-SDI only)
9. BNC Camera Inputs (HD-SDI only)
10. Audio Connections
11. Alarm Inputs
12. RS485 Connections
13. Alarm Outputs
1. USB Ports:
Top - for Firmware Update and/or Video Backup
Bottom - for Mouse
2. Power Indicator LED
3. Internal Fan Indicator LED
4. Recording Indicator LED
5. Network Indicator LED
6. IR Sensor for Remote
7. CD-R/DVD-R Disc Drive
8. Disc Drive Eject Button
9. Jog Wheel
10. Enter
11. Back
2 10
5
4
3 11
4 10 11 13125
For use with HD-SDI cameras only.
Standard/Analog cameras will not
function with this DVR.
12
eSATA
ALARM IN
ALARM OUT
MAIN
SPOT
AUDIO
OUT
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
HDMI VGA NETWORK
SPOT
9 - 16
SPOT
1 - 8
VIDEO IN
AUDIO IN
AIN1
AIN9
AIN2
AIN10
AIN3
AIN11
AIN4
AIN12
AIN5
AIN13
AIN6
AIN14
AIN7
AIN15
AIN8
AIN16
RS 485
ALARM OUT
HARDWARE OVERVIEW | Hybrid Series 16CH
BACK
FRONT
1 6
7 98
1 3 7 11 13
2 4 10 12
1. Power Input
2. Power ON/OFF Switch
3. BNC Video Out - SPOT (Channels 9-16)
4. BNC Video Out - SPOT (Channels 1-8)
5. Alarm Outputs
6. Alarm Inputs
7. BNC Camera Inputs (HD-SDI & Analog)
8. BNC Video Out - MAIN
9. BNC Video Out - SPOT (Channels 1-16
10. HDMI Video Out - MAIN
11. VGA Video Out - MAIN
12. RJ45 Network Connection
13. RS485 Connections
14. RCA Audio Output
15. RCA Audio Inputs
16. eSATA Port
2 10
5
4
3 11
5 86 9 14 15 16
1. USB Ports:
Top - for Firmware Update and/or Video Backup
Bottom - for Mouse
2. Power Indicator LED
3. Internal Fan Indicator LED
4. Recording Indicator LED
5. Network Indicator LED
6. IR Sensor for Remote
7. CD-R/DVD-R Disc Drive
8. Disc Drive Eject Button
9. Jog Wheel
10. Enter
11. Back
13
CONNECTING YOUR DVR
Basic DVR Connection Diagram
1. Connect coaxial cable from cameras to the desired channel on the back of the DVR.
2. Plug in an ethernet/CAT5 cable to the Network port on the back of the DVR. *If planning to network the DVR
3. Connect any RS485, Alarm or Audio connections.
4. Choose the desired main monitor connection; VGA / BNC / HDMI.
5. Plug the power cord into the back of the DVR.
6 . Plug the cord from the power supply into an appropriate surge protector.
7 . If your DVR has a Power ON/OFF switch - turn the DVR on. DVRs without a power switch will power ON automatically
once the power has been connected.
Clinton DVRs come pre-configured to automatically record video.
Surge ProtectorModem/Router
Camera
DVR Power Supply
DVR
Monitor
It is strongly recommended to plug the DVR power supply
into a surge protector.
A surge protector will help protect the DVR from damage
caused by unwanted surges/spikes in voltage and lightning.
NOTICE
Ensure there is adequate ventilation around
the DVR and do not cover or block the fan
and/cooling vents. The DVR can over-heat
if these are blocked.
Do not install the DVR into an environment
that is exposed extreme temperates; attic/
walk-in freezer. Do not install the DVR on
top or near equipment that generates heat.
14
MOUSE & JOG WHEEL OVERVIEW
Outer Ring
Use to navigate through DVR menus
Turn & hold Left or Right to Fast Forward /
Reverse during playback
Releasing during playback pauses video
Enter
Enters the selected menu item
Left Click
Select Menu Options
Click desired camera image to display full
screen, click again to return to Multiplex view
Jog Wheel
Use to navigate through DVR menus
Turn & hold Left or Right to search frame by
frame during playback.
Releasing during playback pauses video.
Esc/Exit
Backs out of current selection
Right Click
Access the menu screen
Scroll Wheel
Digital Zoom In / Zoom Out when displaying a
camera view
Use the Jog Wheel when a Mouse or Remote is not available. The Jog Wheel is currently available only on the CE-
HDV16 & CE-HY16 model DVRs.
Image may vary from actual mouse supplied with the DVR.
15
LED
Illuminates red when a button is pressed
Lock
Quick User/Admin Logout
Fast Forward / Play
Fast Forward / Play
Menu
Access the menu screen
Enter
Enters the selected menu item
Pause
Pause live or recorded footage
Record
Manual record
Up Direction Key / P
Up arrow / Panorama Play
Search
Open search menu
Esc
Backs out of current selection
Right Direction Key / Play
Right arrow / Play
Preset (PTZ)
Cycle through PTZ presets when PTZ is
connected
Iris (PTZ)
Iris mode when PTZ is connected
REMOTE CONTROL OVERVIEW
Use the buttons on the remote to quickly jump to DVR menu options, change camera views and more.
One remote can control up to 20 DVRs.
ID
Two digit remote control code from 00 to 19 (Default code is 00). Hold down ID and press two digits, ex: 01, to change ID to 1. ID code should
match DVR ID (Unit Address). The DVR ID can be found/changed in the General/System menu. A single remote control can be used to control up
to 20 DVRs.
Display
Cycle through the various Multiplex Views
ID
Two digit remote control code from 00 to 19
Left Direction Key / Reverse
Left arrow / Reverse
Backup
Open manual backup menu
Rotate
Cycle camera/channel of Multiplex View
Down Direction Key / S
Down arrow / Smart Play
Zoom (PTZ)
Zoom mode when PTZ is connected
Number Keys
Use to select a specific camera (1-9) quickly
10+
Use to select a specific camera (10-16) quickly
ex:: Press the 10+ button, then 0 to select
camera 10.
Fast Reverse / PTZ
Quick reverse search / Open PTZ Menu
Focus (PTZ)
Focus mode when PTZ is connected
Pressing 1024768 + ENTER on the number
pad will reset the screen resolution.
16
LOGIN & LOGOUT
Login Box
Log-Out
A user ID and Password is requited to access any DVR controls.
The default ID is “root” and the default password is “1111.
Click the 3 [Check Mark] with the mouse cursor or press the ENTER button on the remote to proceed.
To edit User ID and Password information, please refer to SETUP/ACCOUNT.
Select the Log-Out icon (LOCK icon found at the top of the screen) to exit from your account. After a certain period of
inactivity, the DVR will automatically log out the user. The automatic log out (Menu Timeout) can be adjusted in Setup
Menu > General > System > Menu Timeout.
Default
Password:
1111
Default
ID:
root
SettingsSearch Status LOG-OUTBackup
Delete/Backspace
17
Current Channel Information Icons:
Video-Loss Icon: Shows when no video input is sensed.
Audio Icon: Shows when audio occurs within the live screen.
Freeze Icon: Shows when live view is paused.
PTZ Icon: Shows when in PTZ mode
Record Status Icons:
Record Icon: Shows when recording is active.
Time Icon: Shows when time (schedule) record mode is active.
Motion Icon: Shows when motion occurs.
Sensor Icon: Shows when the external sensor is triggered.
LIVE VIEW SCREEN LAYOUT
1
3
2
5 6 7 8 9
10
11
4
1. Execution Information Message
2. Camera Name
3. Record Status Icons
4. Backup Progress Status %
5. Current Channel Information Icons
6. Sequence Icon: When screen image is cycled continuously
7. PTZ Control Information
8. Current Date and Time
9. Current Event Information
10. Zoom 2x / 4x Location
11. Live Screen Area
If the Record Icon is BLUE, the DVR is in the Search/Playback mode.
18
Top Menu
Bottom Menu - Live View
In the live screen, press the UP button on the remote control, or move the mouse cursor over the top area of the
screen. The top menu will automatically appear.
In the live screen, press the DOWN button on the remote control, or move the mouse cursor over the bottom area of
the screen. The bottom menu will automatically appear.
Selecting one of these menu options will change the Multiplex View (the way the live camera views are arranged).
Depending on the model of DVR, not all Multiplex View options will be available. Example, a 4 Channel DVR will not
be able to display 16 camera views.
Search Status Settings Log-Out
Full
Screen
Quad
Screen
9
Cameras
8-Mini
2-Large
12-Mini
1-Large
16
Cameras
4-Mini
3-Large
MENU ICONS EXPLAINED
Main Menu (Middle)
Press the MENU button on the remote control, or right click with the mouse - then choose Main Menu.
Setup Camera Event Record Network Info
Backup
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94

Clinton Electronics CE-R4S User manual

Category
Digital Video Recorders (DVR)
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI