Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range
on Pass Through Gas Oven, 2 Sides
with Ecoflam
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range on Pass Through Gas
Oven, 2 Sides with Ecoflam
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range on
Pass Through Gas Oven, 2 Sides with
Ecoflam
584258 (GC1G24A2BF)S90 4 OPEN GAS BURNERS
(82,000 BTU), PASS
THROUGH GAS OVEN,
2SIDE OPERATION WITH
ECOFLAM
Unit to be Electrolux S90 Heavy Duty two 17,000 BTU (5 kW) and two 24,000 BTU
(7 kW) burner gas range with heavy duty 24,000 BTU (7 kW) standard pass through
gas oven and ecoflam system. Unit to be installed in central island type installations
with operating from both sides. High efficiency burners with continuous power
regulations to high power of 82,000 BTU’s (24 kW). Thermocouples as standard
on burners and oven for added safety. Body and open base of unit entirely in 304
Stainless steel. Pan supports in heavy duty cast iron. Unit shall have heavy duty
304 Stainless steel internal frame with reinforcement on the top of 3 mm.
Extra strength work top in heavy duty 3 mm Stainless steel.
“Lastertec” connection system permits units to be connected to each other creating
a seamless work top.
Main Features
•Unit for island type installation with operations by chef
from both sides (knobs on both sides of the console).
•The two 5 kW and two 7 kW high efficiency burners
suit high performing cooking requirements for the
most demanding customers.
•Model is supplied with Ecoflam pan detection system,
which saves energy and reduces unnecessary heat
radiation in the kitchen.
•Manual gas valves with fixed high and low positions
allow precise control of the flame intensity.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the
largest down to the smallest pans.
•Base compartment consists of a gas heated standard
oven with gas fired burner for base heat. Ovens
equipped with one Chrome-plated grid and one
enameled baking tray.
•7 kW Gas oven is with thermostatic valve and
thermocouple safety device.
•Oven temperature up to 340 °C
•Thick steel base plate in the oven for an even
temperature distribution and storage.
•Flat deep drawn spillage area with removable pan
supports, burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel
with reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work
top when units are connected to each other.
•Unit delivered with four 200 mm legs as standard (all
round Stainless steel kick plates as option).
Included Accessories
•1 of Baking sheet 2/1 GN for ovensPNC 910651
•1 of Grid, chromium plated, for ovens
2/1 GN
PNC 910652
•4 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
•Solid top plate for open burner,
360x360mm
PNC 910718
❑
•Flexible connection hose 3/4"PNC 910720
❑
•Pan rest CNS, 430x380mmPNC 910729
❑
•Side panel, freestanding installations
(units without rear C-board)
PNC 911527
❑
•Stainless steel front and back kicking
strips, 1000mm
PNC 911533
❑
•Stainless steel kicking strips, both
sides, left and right
PNC 911638
❑