Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas
Range Ecoflam on Open Base C-
Board
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range Ecoflam on Open Base C-
Board
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range
Ecoflam on Open Base C-Board
584249 (GC1G21C1BF)S90 4 OPEN GAS BURNERS
(82,000 BTU), ECOFLAM,
OPEN BASE, CB, 1SIDE
OPERATION
Unit to be Electrolux S90 Heavy Duty two 17,000 BTU (5 kW) and two 24,000
BTU (7 kW) burner gas range on open base with ecoflam. High efficiency
burners with continuous power regulations to high power of 82,000 BTU’s
(24 kW). Thermocouples as standard on burners for added safety. Unit to
have raised rear c-board for against the wall or back to back unit installation.
Body and open base of unit entirely in 304 Stainless steel. Pan supports in
heavy duty cast iron. Unit shall have heavy duty 304 Stainless steel internal
frame with reinforcement on the top of 3 mm.
Extra strength work top in heavy duty 3 mm Stainless steel.
“Lastertec” connection system permits units to be connected to each other
creating a seamless work top.
Main Features
•The two 5 kW and two 7 kW high efficiency burners suit high
performing cooking requirements for the most demanding
customers.
•Model is supplied with Ecoflam pan detection system, which
saves energy and reduces unnecessary heat radiation in the
kitchen.
•Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Open base compartment for storage of pots, pans, sheet
pans, etc.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Raised rear C-Board permits unit to be connected up against
the wall for better hygiene.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Included Accessories
•4 of Cast-iron pan rest for 3,5-5-7Kw burner,
430x380mm
PNC 911912
Optional Accessories
•Solid top plate for open burner, 360x360mmPNC 910718 ❑
•Flexible connection hose 3/4"PNC 910720 ❑
•Pan rest CNS, 430x380mmPNC 910729 ❑
•Shelf fixation, one side open bases and hot
cupboards
PNC 910771 ❑
•Shelf for one side open bases and hot
cupboards, W=1000mm, thermaline 800&900
PNC 910783 ❑
•Side panel, wall mounted or against the wall,
right (units 700mm high)
PNC 911528 ❑
•Side panel, wall mounted or against the wall,
left (units 700mm high)
PNC 911530 ❑
•Stainless steel front kicking strip, 1000mm PNC 911560 ❑
•Stainless steel kicking strips, against wall
installation, left and right
PNC 911639 ❑
•Kit for wall mounted installation for units
700mm high
PNC 911670 ❑
•Lower side panel (300mm) for wall mounted
installation for units 700mm high, leftside
PNC 911671 ❑
•Lower side panel (300mm) for wall mounted
installation for units 700mm high, rightside
PNC 911672 ❑
•Portioning shelf, 1000mm widthPNC 911856 ❑
•Portioning shelf, 1000mm widthPNC 911878 ❑
•Side panel, wall mounted or against the wall,
right (units 700 mm high)
PNC 911950 ❑
•Side panel, wall mounted or against the wall,
left (units 700 mm high)
PNC 911951 ❑