Crestron QM-WMIC Wall Plate Media Center Microphone Input
Wall Plate Media Center
Microphone Input: QM-WMIC
Purpose
The purpose of this addendum is to provide correction to errant information in the
original QM-WMIC Operations & Installation Guide (Doc. 6245). Specifically, this
addendum adds and corrects specifications for the Microphone Input Levels listed on
page 3.
Correction for Microphone Input Level Specifications
The specification table on page 3 is missing dBu specifications for the XLR Input
Level Range on the QM-WMIC. It also lists incorrect dBu values for the ¼” Input
Level Range on the QM-WMIC. The specifications for “Input Level Range” should
read as:
Updated Input Level Range Specification Showing Correct dBu Values
SPECIFICATION DETAILS
Input Level Range
XLR
¼”
-60 dBV to –20 dBV
(-58 dBu to -18 dBu)
-28 dBV to +12 dBV balanced
(-26 dBu to +14 dBu)
-28 dBV to +6 dBV unbalanced
(-26 dBu to +8 dBu)
Max. Input: 4 Vrms balanced
2 Vrms unbalanced
Crestron Electronics, Inc. Addendum #2 for DOC. 6245
15 Volvo Drive Rockleigh, NJ 07647 05.04
Tel: 888.CRESTRON
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
/