Page is loading ...
750 WS 125
Angle grinder
750 WS 125
750 watt high-performance motor
Very narrow design for ideal ergonomics
Spindle lock for quick disk change
Order number: 06044504
Technical Data
Nominal rated input 750 Watt
No-load speed 10.500 1/min.
Diameter of grinding disk 125 mm
Spindle thread M 14
Disk holder bore 22,2 mm
Tool weight 1,6 kg
Product features
Short and robust aluminium gear casing to facilitate work in narrow spaces
Carbon cut-off brush for motor protection
4 m rubber mains cable
Scope of delivery
Two-component soft handle, face spanner (no cut-off disk)
Available as accessory
Separating shield cover 125-3 (Product no. 98 04 3401)
Noise/Vibration Information
vibration emission level a
h
3.5 m/s
2
uncertainty velue K 1.5 m/s
2
sound pressure level L
pA
91 dB(A)
uncertainty velue K 3.0 dB(A)
noise power level
L
wA
102 dB(A)
uncertainty velue K 3.0 dB(A)
L
pA
= A-rated sound pressure level, L
wA
= A-rated sound power level
Angle grinder
750 WS 125
750 watt high-performance motor
Very narrow design for ideal ergonomics
Spindle lock for quick disk change
Order number: 06044504
K = Measurement uncertainty value, a
h
= Triaxial vibration emission level
Measurement values determined according to EN 60745.
Further noise and vibration information
KRESS-elektrik GmbH & Co. KG | P.O.Box 166, 72403 Bisingen, Germany
Phone +49 (0) 7476 / 87-300 | Fax +49 (0) 7476 / 87-191 | E-mail: [email protected] | www.kress-elektrik.com
/
