2400 WSE/1 230
Angle grinder
2400 WSE/1 230
2.400 watt high-performance motor
Starting current limitation for user-friendly
start-up
Armoured motor winding to protect against dust
and particles
Order number: 06046503
Technical Data
Nominal rated input 2.400 Watt
No-load speed 6.500 1/min.
Diameter of grinding disk 230 mm
Spindle thread M 14
Disk holder bore 22,2 mm
Tool weight 6,0 kg
Product features
Safety switch for high level of safety and working comfort
Spindle lock for quick grinding disk change
Carbon cut-off brush for motor protection
Aluminium die-cast gear casing
Service cover for carbon brush change
4 m rubber mains cable
Scope of delivery
Additional handle, face spanner (no cut-off disk)
Available as accessory
Separating shield cover 230-1 (Product no. 98 04 2002)
Noise/Vibration Information
vibration emission level a
h
3.5 m/s
2
uncertainty velue K 1.5 m/s
2
sound pressure level L
pA
92 dB(A)
uncertainty velue K 3.0 dB(A)
noise power level
L
wA
103 dB(A)
uncertainty velue K 3.0 dB(A)
L
pA
= A-rated sound pressure level, L
wA
= A-rated sound power level
K = Measurement uncertainty value, a
h
= Triaxial vibration emission level
Angle grinder
2400 WSE/1 230
2.400 watt high-performance motor
Starting current limitation for user-friendly
start-up
Armoured motor winding to protect against dust
and particles
Order number: 06046503
Measurement values determined according to EN 60745.
Further noise and vibration information
KRESS-elektrik GmbH & Co. KG | P.O.Box 166, 72403 Bisingen, Germany
Phone +49 (0) 7476 / 87-300 | Fax +49 (0) 7476 / 87-191 | E-mail: [email protected] | www.kress-elektrik.com
/