FEATURES
• Solidly constructed chassis interior (0.7mm SPCC)
• Supports CPU cooler max. height up to 186mm(without fans on side panel)
• Supports Long VGA Cards up to 310mm
• Includes 1 x 14cm Black fan at rear and 1 x 20cm LED fan in front
• Top panel aps can be opened or closed to control air ow more eciently
• Dust lter for PSU
• Includes 1 x external 2.5” HDD docking on top panel for easy access
• Includes two fan controller knobs each controls fan/s up to 25W
• Install up to 9 fans
• Includes antivibration pads for HDDs and PSU
• Cable Routing Management holes with high-end rubber grommets to protect your cables
• Pre-drilled CPU holes for easy mounting and removable of CPU cooler
• Support water cooling
• 2 x USB3.0 and Audio/Mic ports are easily accessible from top panel
• USB3.0 >USB2.0 adaptor included
REFERENCE XPREDATORX3AVENGER
EAN 4713105952247
DIMENSIONS 527 (H) x 223 (W) x 533 (D) mm
PESO 10.36 Kgr.
Ud/ CAJA 1 Unidad
Ud/ PALET 14 Uds.
XPREDATOR X3
AVENGER
Case Type High Mid Tower
Material 0.7/0.6 SPCC Steel
Motherboards ITX / ATX / MicroATX
Drive Bays 3 x 5.25” external / 8 x HDDs internal/
1 x 3.5” external + 1 x 2.5”HDD Hot Swap Slot
Expansion slots 8
Max. length for PCI slots 310 mm
I/O Ports 2xUSB 3.0 / Audio + Mic / 2 x fan controler
Highest height for CPU cooler 186 mm
/