01
18020364
OSC
01
18020364
OSC
B Press DTV/USB button on the remote control.
RF Cable
"DTV", "ATV", "AV", "PC", "YPbPr", "Blu-ray", "HDMI1",
"HDMI2", "USB".
27-31
21-26
15
(For more details see "CHANNEL Menu", page
The TV LED indicator will light up in red, showing that the TV is now in Standby Mode.
Connect the power cord to your AC power supply and flip the on the back of the TV to ON.
Press the
The LED indicator will light up in green, and the TV will take a few seconds to start up.
: If the LED Indicator is not lighted, please check that the physical
with an external power supply.Use only USB2 for recording.
Power S wi tch
POWER/STANDBY
button on the remote control or on the TV's button panel to turn the TV on.
NOTE
is flipped to the ON position
oPower S wi tch