Samsung ‎מקרן קול קעור עם סאב וופר 300 W 2.1 Ch Bluetooth User manual

Wireless Audio - Soundbar

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive a more complete service, please register your product at

www.samsung.com/register

User manual

HW-J450

HW-J450-XM ENG-0109.indd 1 2015/2/7 14:20:54

32

FEATURES

TV SoundConnect

TV SoundConnect lets you listen to audio from your TV on your Soundbar via a Bluetooth connection and lets you

control the sound.

HDMI

HDMI transmits video and audio signals simultaneously, and provides a clearer picture.

The unit is also equipped with the ARC function which lets you listen to sound from your TV through the Soundbar via

an HDMI cable. This function is only available if you connect the unit to an ARC compliant TV.

SURROUND SOUND

The SURROUND SOUND feature adds depth and spaciousness to your listening experience.

Wireless Subwoofer

Samsung’s wireless module does away with cables running between the main unit and the subwoofer.

Instead, the subwoofer connects to a compact wireless module that communicates with the main unit.

Special Sound Effects

You can select different Sound Effects - STANDARD (Original Sound)/MUSIC / VOICE / SPORTS / CINEMA / NIGHT

MODE - depending on the type of content you want to enjoy.

Multi-function Remote Control

You can use the supplied remote control to control various operations with the simple press of a button.

USB Host Support

You can connect and play music files from external USB storage devices such as MP3 players, USB flash memory,

etc. using the Soundbar's USB HOST function.

Bluetooth Function

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!

Using Samsung Audio Remote App

To control the product with your Smart Device via the Samsung Audio Remote app, download the Samsung Audio

Remote App by accessing the app through Google Play store.

LICENSES

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the

Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

HW-J450-XM ENG-0109.indd 2 2015/2/7 14:20:54

32

ENG

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage” inside

the product that presents a risk of electric shock or

personal injury.

This symbol indicates important instructions

accompanying the product.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug

shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug

must be easily and readily accessible at all times.

HW-J450-XM ENG-0109.indd 3 2015/2/7 14:20:54

54

SAFETY INFORMATION

PRECAUTIONS

Ensure that the AC power supply in your house complies with the power requirements listed on the identification

sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with

enough space around it for ventilation 7~10 cm. Make sure the ventilation slots are not covered. Do not place the

unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn

off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long

period of time.

99.1mm 99.1mm

68.6

mm

99.1mm

During thunderstorms, disconnect the AC plug from

the wall outlet. Voltage peaks due to lightning could

damage the unit.

Protect the product from moisture (i.e. vases), and

excess heat (e.g. a fireplace) or equipment creating

strong magnetic or electric fields. Disconnect

the power cable from the AC supply if the unit

malfunctions. Your product is not intended for industrial

use. It is for personal use only.

Condensation may occur if your product has been

stored in cold temperatures. If transporting the unit

during the winter, wait approximately 2 hours until the

unit has reached room temperature before using.

Do not expose the unit to direct sunlight or other heat

sources.

This could lead to overheating and cause the unit to

malfunction.

The batteries used with this product contain chemicals

that are harmful to the environment. Do not dispose

of batteries in the general household trash. A warning

that batteries (battery pack or batteries installed) shall

not be exposed to excessive heat such as sunshine,fire

or the like. Do not short circuit, disassemble, or

overheat the batteries. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or

equivalent type.

HW-J450-XM ENG-0109.indd 4 2015/2/7 14:20:55

54

ENG

CONTENTS

2 FEATURES

2 Licenses

3 SAFETY INFORMATION

3 Safety Warnings

4 Precautions

6 GETTING STARTED

6 Before reading the User’s Manual

6 What’s Included

7 DESCRIPTIONS

7 Top/Front Panel

8 Rear Panel

9 REMOTE CONTROL

9 Remote Control Buttons and Functions

11 CONNECTIONS

11 Installing the Wall Mount

12 Detaching the Wall Mount

12 Installing the bracket without referring to

the Wall-mount Installation Guide

13 Connecting the Wireless Subwoofer

15 Connecting an External Device using an

HDMI cable

16 Connecting an External Device using

Audio (analogue) cable or Optical (digital)

cable

17 FUNCTIONS

17 Input Mode

17 ARC (HDMI OUT)

18 Bluetooth

20 Using Samsung Audio Remote App

21 TV SoundConnect

22 USB

23 Software update

24 TROUBLESHOOTING

25 APPENDIX

25 Specifications

Figures and illustrations in this User Manual are

provided for reference only and may differ from actual

product appearance.

HW-J450-XM ENG-0109.indd 5 2015/2/7 14:20:55

76

GETTING STARTED

BEFORE READING THE USER’S MANUAL

Note the following terms before reading the user manual.

+ Icons used in this manual

Icon Term Definition

Caution

Indicates a situation where a function does not operate or settings may be canceled.

Note

Indicates tips or instructions on the page that help you operate a function.

+ Safety Instructions and Troubleshooting

1) Be sure to familiarise yourself with the Safety Instructions before using this product. (See page 3)

2) If a problem occurs, check Troubleshooting. (See page 24)

+ Copyright

Samsung Electronics Co.,Ltd.

WHAT’S INCLUDED

Check for the supplied accessories shown below.

(Wall Mount L: 1EA)

(Wall Mount R: 1EA)

Remote Control / Lithium Battery

(3V : CR2032)

User Manual Bracket-Wall Mount

(Holder-screw2: 2EA)

(Holder-screw1: 2EA)

Wall Mount Guide Holder-Screw Power Cord:2EA

DC Adapter Optical cable USB Cable

● The appearance of the accessories may differ slightly from the illustrations above.

● Use the dedicated USB cable to connect external USB devices to the unit.

HW-J450-XM ENG-0109.indd 6 2015/2/7 14:20:55

76

ENG

DESCRIPTIONS

TOP/FRONT PANEL

(Power) Button

Turns the power on and off.

VOL -/+

Controls the volume level.

The numeric value of the volume level appears in

the front panel display.

(SOURCE) Button

Selects the D.IN, AUX, HDMI, BT, TV, USB

input.

● While the unit is powered on, pressing

the (

) button for more than 3

seconds sets the button to act as

MUTE button. To cancel MUTE button

setup, press the (

) button for more

than 3 seconds again.

● When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

● If you want to enjoy the sound only from the Soundbar, you must turn off the TV's speakers in the Audio

Setup menu of your TV. Refer to the owner's manual supplied with your TV.

Display

Displays the current mode.

● If there is no input from the product or

remote control for 25 seconds, the display

will dimmer automatically.

HW-J450-XM ENG-0109.indd 7 2015/2/7 14:20:56

98

DESCRIPTIONS

REAR PANEL

HDMI OUT(TV)OPTICAL IN

HDMI IN

AUX IN

DC 24V (Power Supply In)

Connect the DC power adaptor to

the power supply jack, and then

connect the AC power adaptor

plug to a wall outlet.

(USB Port)

Connect USB devices such as

MP3 players here to play files on

the devices.

HDMI OUT (TV)

Outputs digital video and audio

signals simultaneously using an

HDMI cable.

OPTICAL IN

Connect to the digital (optical) output

of an external device.

HDMI IN

Inputs digital video and audio

signals simultaneously using an

HDMI cable. Use when

connecting a supported external

device.

AUX IN

Connect to the Analog output of

an external device.

● When disconnecting the power cable of the AC power adaptor from the wall outlet, pull the plug.

Do not pull the cable.

● Do not connect this unit or other components to an AC outlet until all connections between components

are complete.

HW-J450-XM ENG-0109.indd 8 2015/2/7 14:20:57

98

ENG

REMOTE CONTROL

REMOTE CONTROL BUTTONS AND FUNCTIONS

WOOFER (*Use the

[

,

]

button to adjust volume )

You can control the woofer volume.

Press the

[

,

]

button to increase or decrease the subwoofer volume.

You can select SW (-12, -6,-5,-4,-3,-2,-1,0,+1,+2,+3,+4,+5,+6).

AUTO POWER

Auto Power Link: Synchronizes the Soundbar to a connected Optical source

via the Optical jack so it turns on automatically when you turn on your TV.

(Auto Power Link : Default OFF, ON-Anynet+ / OFF-POWER LINK or

OFF-Anynet+ / ON-POWER LINK ). The Anynet+ function lets you control

the Soundbar with the remote from an Anynet+ compatible Samsung TV.

The Soundbar must be connected to the TV via an HDMI cable.

* Anynet+:

Press the AUTO POWER button to turn the Anynet+ function

on or off.

REPEAT

Press to set the REPEAT function during music playback from a USB

device.

OFF-REPEAT : Cancels Repeat Playback.

TRACK-REPEAT : Repeatedly play a track.

ALL-REPEAT : Repeatedly play all tracks.

RANDOM-REPEAT : Plays tracks in random order.

(A track that has already been played may be played again.)

MUTE

You can turn the volume down to 0 with the push of a button.

Press again to restore the sound to the previous volume level.

SOURCE

Press to select a source connected to the Soundbar.

Skip Forward

If there is more than one file on the device you are playing, and you press

the ] button, the next file is selected.

● Soundbar is a Samsung proprietary name.

● Operate the TV using the TV's remote control.

SOUND CONTROL (*Use the

[

,

]

buttons to adjust level.)

Press to select TREBLE, BASS, or AUDIO SYNC.Then, use the

[

,

]

buttons to adjust the Treble, Bass volume from -6 to +6.

If the Soundbar is connected to a digital TV and the video appears out of

sync with the audio, press the SOUND CONTROL button to sync the

audio with the video.

Use the [,] buttons to set the audio delay between

0 ms and 300 ms.

In USB mode, TV mode, and BT mode, the Audio Sync

function may not work.

Press and hold the SOUND CONTROL button for about 5 seconds to

adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz,

1.2KHz,2.5KHz, 5KHz and 10KHz are selectable and each can be adjusted

to a setting between -6 and +6.

HW-J450-XM ENG-0109.indd 9 2015/2/7 14:20:57

1110

REMOTE CONTROL

Bluetooth POWER

Press the Bluetooth POWER button on the remote to turn the Bluetooth

POWER on function on and off.

See pages 19 and 21 for details.

SOUND

Press the SOUND button on the remote to add depth and spaciousness to

the sound.

Press the SOUND on the remote control.

Each time the button is pressed, the selection changes as follows :

ON-SURROUND SOUND  OFF-SURROUND SOUND

VOLUME

Adjusts the volume level of the unit.

POWER

Turns the Soundbar on and off.

SOUND EFFECT

You can select different sound modes - STANDARD,MUSIC, VOICE,

SPORTS, CINEMA, and NIGHT MODE - depending on the type of

sources you want to enjoy.

Press the SOUND EFFECT button on the remote control.

Select the STANDARD mode if you want to enjoy the original sound.

* Night Mode

This will regulate and stabilize the volume level against a drastic volume

change caused by a channel change or scene transition.

Play/Pause

Press the

+#

button to pause playing the file temporarily.

Press the

+#

button again to play the selected file.

Skip Back

If there is more than one file on the device you are playing, and you press

the

[

button, the previous file is selected.

+ Installing the Battery in the Remote Control

1. Use a suitable coin to turn the

remote control's battery cover

counterclockwise to remove it

as shown in the figure above.

2. Insert a 3V lithium battery. Keep the

positive (+) pole facing up when inserting

the battery. Put the battery cover on and

align the '●' marks side by side as

shown in the figure above.

3. Use a suitable coin to

turn the remote control

battery cover clockwise

as far as it will go to fix it

in place.

HW-J450-XM ENG-0109.indd 10 2015/2/7 14:20:57

1110

ENG

CONNECTIONS

INSTALLING THE WALL MOUNT

You can use the wall mount bracket to mount this unit on a wall.

+ Installation Precautions

● Install on a vertical wall only.

● For the installation, avoid a location with high temperature or

humidity, or a wall that cannot sustain the weight of the set.

● Check the strength of the wall. If the wall is not strong enough to

support the unit, reinforce the wall or install the unit on a different

wall that can support the unit's weight.

● Purchase and use the fixing screws or anchors appropriate for the

kind of wall you have (plaster board, iron board, wood, etc.).

If possible, fix the support screws into wall studs.

● Purchase wall mounting screws according to the type and

thickness of the wall you will mount the Soundbar on.

- Diameter : M5

- Length: L 35 mm or longer recommended

● Connect cables from the unit to external devices before you install

it on the wall.

● Make sure the unit is turned off and unplugged before you install it.

Otherwise, it may cause an electric shock.

1. Place the installation guide against the wall surface.

•The installation guide must be level.

•Install at least 5 cm below the TV, if the TV is mounted on the

wall.

2. Mark the location where the screws will go through on the wall

using a pen, and then remove the installation guide.

3. Fasten the wall mounts and screws to the marked locations.

•The left and right mounts are different shapes.

4. Secure the two holder screws to the screw holes on the back of

the Soundbar's main body, one on the left and one on the right.

5. Insert the USB cable into the back of the Soundbar before installing

it on the wall.

6. Set the holder screws on the back of the Soundbar into the

grooves of the wall mount. For safe installation, make sure to push

the holder screws all the way to the bottom of the grooves.

5 cm or more

Using the Soundbar with Wall Mount

[Wall Mounting the Soundbar]

HW-J450-XM ENG-0109.indd 11 2015/2/7 14:20:58

1312

CONNECTIONS

DETACHING THE WALL MOUNT

1. Pull the Soundbar upwards as shown in the figure to separate it

from the wall mount.

● Do not hang onto the installed unit and avoid striking or dropping the unit.

● Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or

damage the product.

● When the unit is installed on a wall, please make sure that children do not pull any of the connecting

cables, as it may cause it to fall.

● For the optimal performance of a wall mount installation, install the speaker system at least 5 cm below the

TV, if the TV is mounted on the wall.

● For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely to fall.

INSTALLING THE BRACKET WITHOUT REFERRING TO THE

WALL-MOUNT INSTALLATION GUIDE

5 cm or more5 cm or more

16 cm 17.5 cm

Minimum 32.8 ~ 33.5 cm

1. Place the “Wall Mount L” on the desired wall surface while paralleled to the floor as shown above, and fix a screw

through the hole on its right end.

2. Place the “Wall Mount R” on the desired wall surface while paralleled to the floor as shown above, and fix a screw

through the hole on its left end.

•If Wall Mount L/R are to be mounted beneath the TV, check their fixing hole positions in steps 1 and 2, so that

they are aligned appropriately to the center of the TV’s bottom.

3. Fix screws through the rest of holes.

Using the Soundbar with Wall Mount

[Detaching the Soundbar from the Wall Mount]

HW-J450-XM ENG-0109.indd 12 2015/2/7 14:20:59

1312

ENG

CONNECTIONS

CONNECTING THE WIRELESS SUBWOOFER

The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly)

automatically when the main unit and subwoofer are turned on. If the Link indicator

( )

does not light when the

main unit and subwoofer are turned on, please set the ID by following the procedure below.

1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.

2. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.

•The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.

3. While the main unit is powered off (in STANDBY mode), press and hold the MUTE

( )

on the remote control for

5 seconds.

4. The ID SET message appears on the Soundbar's display.

5. To finalize the link, turn the main unit’s power on while the subwoofer’s Blue LED blinks.

•The main unit and the subwoofer should now be linked (connected).

•The Link indicator (Blue LED) on the subwoofer should be on.

•If the Link indicator is not solid blue, the linking process has failed. Turn off the main unit and start again from

Step 2.

•You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 10)

HW-J450-XM ENG-0109.indd 13 2015/2/7 14:20:59

1514

CONNECTIONS

● Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

● If the main unit is powered off, the wireless subwoofer will be in standby mode and the STANDBY LED on

the upper side will come on after the Link indicator (Blue LED) blinks for 30 seconds.

● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar,

interference may cause some sound interruption.

● The transmission distance of the wireless signal between the main unit and subwoofer is about 10 m, but

may vary depending on your operating environment.

If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not

operate at all, because the wireless signal cannot penetrate metal.

● If the main unit doesn't make a wireless connection, follow steps 1-5 to re-set the connection between the

main unit and wireless subwoofer.

● The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and

moisture.

● For optimal listening performance, make sure that the area around the wireless subwoofer location is clear

of any obstructions.

HW-J450-XM ENG-0109.indd 14 2015/2/7 14:20:59

1514

ENG

CONNECTIONS

CONNECTING AN EXTERNAL DEVICE USING AN HDMI

CABLE

HDMI is the standard digital interface for connecting to such TVs, projectors, DVD players, Blu-ray players, set top

boxes, and more.

Because HDMI transmits the highest quality digital signal, you can enjoy superior video and audio - as it was originally

created at the digital source.

HDMI OUT (TV) HDMI IN

HDMI IN

AUX IN

HDMI OUT(TV)OPTICAL IN

HDMI Cable

(not supplied)

HDMI Cable

(not supplied)

Digital Devices

HDMI IN

Connect an HDMI cable (not supplied) from the HDMI

IN jack on the back of the product to the HDMI OUT

jack on your digital device.

and,

HDMI OUT (TV)

Connect an HDMI cable (not supplied) from the HDMI

OUT (TV) jack on the back of the product to the HDMI

IN jack on your TV.

● HDMI is an interface that enables the digital

transmission of video and audio data with

just a single connector.

ARC (HDMI OUT)

The ARC function allows digital audio to output via the

HDMI OUT (ARC) port.

It can be enabled only when the Soundbar is connected

to a TV that supports the ARC function.

● Anynet+ must be turned on.

● This function is not available if the HDMI

cable does not support ARC.

HW-J450-XM ENG-0109.indd 15 2015/2/7 14:21:00

1716

CONNECTIONS

CONNECTING AN EXTERNAL DEVICE USING AUDIO

(ANALOGUE) CABLE OR OPTICAL (DIGITAL) CABLE

This unit comes equipped with one optical in digital jack and one audio Analogue in jack, giving you two ways to

connect it to a TV.

AUX IN

AUDIO

OUT

OPTICAL IN

OPTICAL

OUT

HDMI IN

AUX IN

HDMI OUT(TV)OPTICAL IN

Audio Cable Optical Cable

BD/ DVD player/

Set-top box/

Game console

AUX IN

Connect AUX IN (Audio) on the main unit to the AUDIO

OUT jack of the TV or Source Device.

Change the function to AUX.

or,

OPTICAL IN

Connect OPTICAL IN (Audio) on the main unit to the

OPTICAL OUT jack of the TV or Source Device.

Change the function to D.IN.

● Do not connect the power cord of this

product or your TV to the wall outlet until all

connections between components are

complete.

● Before moving or installing this product, be

sure to turn off the power and disconnect the

power cord.

(Not supplied) (Supplied)

HW-J450-XM ENG-0109.indd 16 2015/2/7 14:21:00

1716

ENG

FUNCTIONS

(Not supplied)

FUNCTIONS

INPUT MODE

Press the ( ) button on the main unit’s

top

p

anel or the (

SOURCE) button on the remote control to select the

mode you want.

Input mode Display

Optical Digital input

D.IN

AUX input

AUX

HDMI input

HDMI

BLUETOOTH mode

BT

TV SoundConnect

TV

USB mode

USB

The unit turns off automatically in the following situations.

● D.IN/HDMI/BT/TV/USB Mode

- If there is no audio signal for 25 minutes.

● AUX Mode

- If the AUX cable is disconnected for 25 minutes.

- In Auto Power Down ON mode,if there is no KEY

input for 8 hours when the AUX cable is connected.

- To turn the Auto Power Down function ON or OFF,

press and hold the

p

button for 5 seconds. OFF/

ON-AUTO POWER DOWN appears on the display.

ARC (HDMI OUT)

ARC (Audio Return Channel) transfers digital audio signal to the HDMI OUT (ARC) port.

HDMI Cable

1. Connect the TV supporting ARC to the Soundbar with an HDMI cable.

2. Turn on the TV, and turn on the Soundbar’s Anynet+.

3. Press the ( ) button on the main unit’s top panel or the (SOURCE) button on the remote control to select

the D.IN mode.

● If the HDMI cable does not support ARC feature, ARC may not work properly.

● To turn off the ARC function, turn Anynet+ off.

HW-J450-XM ENG-0109.indd 17 2015/2/7 14:21:00

1918

FUNCTIONS

BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!

+ To connect the Soundbar to a Bluetooth device

Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.

Bluetooth device

Connect

1. Press the ( ) button on the main unit’s top panel

or the

(SOURCE) button on the remote control

to select the BT mode.

•You will see BT READY on the front display of the

Soundbar.

2. Select the Bluetooth menu on the Bluetooth device

you want to connect. (Refer to the Bluetooth device's

user manual.)

3. Select the Stereo headset menu on the Bluetooth

device.

•You will see a list of scanned devices.

4. Select "[Samsung] Soundbar J-Series" from the

list.

•When the Soundbar is connected to the Bluetooth

device, it will display [Bluetooth device name]



BT on the front display.

•The device name can only be displayed in English.

An underline " _ " will be displayed if the name is not

in English.

•If the Bluetooth device has failed to pair with the

Soundbar, delete the previous "[Samsung]

Soundbar J-Series" found by the Bluetooth

device and have it search for the Soundbar again.

5. Play music on the connected device.

•You can listen to the music playing on the

connected Bluetooth device over the Soundbar.

•In BT mode, the Play/Pause/Next/Prev functions

are not available. However, these functions are

available in Bluetooth devices supporting AVRCP.

● If asked for PIN code when connecting a

Bluetooth device, enter <0000>.

● Only one Bluetooth device can be paired at a

time.

● The Bluetooth connection will be terminated

when you turn the Soundbar off.

● The Soundbar may not perform Bluetooth

search or connection correctly under the

following circumstances:

- If there is a strong electrical field around

the Soundbar.

- If several Bluetooth devices are

simultaneously paired with the Soundbar.

- If the Bluetooth device is turned off, not in

place, or malfunctions.

- Note that such devices as microwave

ovens, wireless LAN adaptors, fluorescent

lights, and gas stoves use the same

frequency range as the Bluetooth device,

which can cause electric interference.

● The Soundbar supports SBC data (44.1kHz,

48kHz).

● Connect only to a Bluetooth device that

supports the A2DP (AV) function.

● You cannot connect the Soundbar to a

Bluetooth device that supports only the HF

(Hands Free) function.

● Once paired the device,on D.IN/AUX/ HDMI/

USB mode, select "[Samsung] Soundbar

J-Series" from the list will automatically

change to BT mode.

HW-J450-XM ENG-0109.indd 18 2015/2/7 14:21:01

1918

ENG

FUNCTIONS

+ Bluetooth POWER on (Bluetooth POWER)

When the Bluetooth Power On function is on and the Soundbar is turned off, if a previously paired Bluetooth device

tries to pair with the Soundbar, the Soundbar turns on automatically.

1. Press the Bluetooth POWER on the remote while the Soundbar is turned on.

2. ON-Bluetooth POWER appears on the Soundbar's display.

● Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth device

and the Soundbar must have been previously paired at least once.)

● Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying

[BT READY].

● In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.

+ To disconnect the Bluetooth device from the Soundbar

You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual.

● The Soundbar will be disconnected.

● When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display

BT DISCONNECTED on the front display.

+ To disconnect the Soundbar from the Bluetooth device

Press the (SOURCE) button on the remote control or the ( ) button on the product's

top

panel to switch

from BT to another mode or turn off the Soundbar.

● The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before

terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar

and the Bluetooth device exceeds 5m.

● The Soundbar automatically turns off after 25 minutes in the Ready state.

More About Bluetooth

Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a

short wireless connection.

● A Bluetooth device may cause noise or malfunction, depending on usage, when:

- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Soundbar.

- It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.

- It is exposed to electrical interference from same frequency-band devices including medical equipment,

microwave ovens, and wireless LANs.

● Pair the Soundbar with the Bluetooth device while they are close together.

● The further the distance between the Soundbar and Bluetooth device, the worse the quality is.

If the distance exceeds the Bluetooth operational range, the connection is lost.

● In poor reception areas, the Bluetooth connection may not work properly.

● The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the

Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as

walls or doors.

● This wireless device may cause electric interference during its operation.

HW-J450-XM ENG-0109.indd 19 2015/2/7 14:21:01

2120

FUNCTIONS

USING SAMSUNG AUDIO REMOTE APP

Install Samsung Audio Remote App

To control the product with your Smart Device via the Samsung Audio Remote app, download the Samsung Audio

Remote App by accessing the app through Google Play store.

Accessing the Samsung Audio Remote App

After you install the Samsung Audio Remote app, follow the instructions in the app.

● The APP function only supports Android mobile phone devices running Android OS 3.0 or later.

HW-J450-XM ENG-0109.indd 20 2015/2/7 14:21:01

Page is loading ...

Samsung ‎מקרן קול קעור עם סאב וופר 300 W 2.1 Ch Bluetooth User manual

This manual is also suitable for

Samsung ‎מקרן קול קעור עם סאב וופר 300 W 2.1 Ch Bluetooth User manual

Related papers

Other documents