Pepperl+Fuchs WS-UC7000-F406-B41-01-02-Y, WS-UC7000-F406-B41-01-02, WS-UCC2500-F406-B41-01-02, WS-UCC2500-F406-B41-01-02-Y, WS-UCC4000-F406-B41-01-02, WS-UCC4000-F406-B41-01-02-Y Operating instructions

Hello! I'm a chat assistant and I've analyzed the provided document about the WILSEN Battery Lifetime Calculator. This document provides instructions for using the tool, which estimates the battery life of WILSEN devices considering various factors like network performance and application parameters. I'm ready to answer your questions about the calculator and its usage.
What is the purpose of the Battery Lifetime Calculator?

What factors does the calculator consider?

How do I use the Battery Lifetime Calculator?

Brief Instructions

Battery Lifetime Calculator for WILSEN Devices 1

Refer to "General Notes Relating to Pepperl+Fuchs Product Information"

Pepperl+Fuchs Group Tel: +49 621 776-0

www.pepperl-fuchs.com E-Mail: inf[email protected]s.com

Battery Lifetime Calculator for WILSEN Devices

For diagnosis and maintenance of WILSEN devices there is a Pepperl+Fuchs service function to calculate the battery lifetime

approximately.

The tool offers to estimate the approximate battery lifetime depending on following aspects:

•The LoRaWAN network performance

•Various application-dependent parameter values

•The measurement and transfer frequency required in the application

Operating

1. Open the web page for the WILSEN service function:

https://wilsen-services.pepperl-fuchs.com/

2. Click on the tab for the "Battery lifetime calculator"

The "Battery lifetime calculator" shows a list of specifications to be defined.

3. Set the respective parameter values that apply to your application.

4. Click on "GET ESTIMATION" button to start the calculation.

As a result, you get the estimated battery runtimes for good, average and bad LoRaWAN coverage / network service quality.