2. SSP
  3. CPA Series Check Valves Cracking Pressure

SSP CPA Series Check Valves Cracking Pressure Operating instructions

  • Hello! I've reviewed the user manual for the CPA Series CVCPA-22A Check Valve. This document provides instructions on how to adjust the cracking pressure of the valve using a hex wrench and a locking screw mechanism. I'm ready to answer any questions you have about adjusting your valve.
  • What tools are needed to adjust the cracking pressure?
    How do I increase the cracking pressure?
    How do I decrease the cracking pressure?
5 Verify cracking
pressure.
8250 Boyle Pkwy Twinsburg, OH 44087 U.S.A. P: 330.425.4250 www.mySSP.com
1 Loosen Locking
Screw by turning
counter-clockwise.
CPA Series Check Valve Cracking Pressure Adjustment
Tools needed: 5/32” (4CPA series) or 5/16” (8CPA series) hex wrench
Locking screw
Inlet
4 Slide hex wrench
back up into the
Locking Screw and
turn clockwise to
lock .
2 Slide hex wrench
further down into
Adjusting
Screw.
3 Turn both screws
clockwise to
increase cracking
pressure, counter-
clockwise to
decrease.
Adjusting screw Locking screw
CVCPA-22A
/