This Nanum Gothic Eco font is provided by NAVER.
MINI HI-FI Component Audio System
(MP3/WMA/CD-DA Playback with CD/USB)
user's manual
MX-JS5000
MX-JS5500
imagine the possibilities
Thank you for purchasing this Samsung
product.
To receive more complete service,
please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
02793F-MX-JS5000-ZA-ENG-20150224.indd 1 2016/2/3 15:32:40
Safety Information
2 English
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND INSERT FULLY.
This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock or
personal injury.
This symbol indicates important
instructions accompanying the
product.
WARNING
•
To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
•
This product contains chemicals known to
the State of California to cause cancer and
reproductive toxicity.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50,
dated June 24, 2007.
DANGER :
•
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
•
CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
•
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN THE COVER
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
WARNING
•
TO PREVENT THE SPREAD
OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
02793F-MX-JS5000-ZA-ENG-20150224.indd 2 2016/2/3 15:32:41
01 Safety Information
3 English
FCC NOTES (for U.S.A)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on.
If interference is present, the user is
encouraged to try to correct the interference
by one or more of the following measures:
•
Reorienting or relocating the receiving
antenna.
•
Increasing the separation between the
equipment and receiver.
•
Connecting this equipment to an outlet that
is on a different circuit than the one the
receiver is connected to.
•
Consulting the dealer or an experienced
radio/TV technician for help.
This class B digital product meets all
requirements of the Canadian Interference -
Causing Equipment Regulations.
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below. Keep these operating
instructions handy for future reference.
1.
Read these instructions.
2.
Keep these Instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of
the polarized or grounding type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10.
Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11.
Only use attachments
accessories specified by
the manufacturer.
12.
Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13.
Unplug this apparatus during lightning
storms or when it will be unused for long
periods of time.
14.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
02793F-MX-JS5000-ZA-ENG-20150224.indd 3 2016/2/3 15:32:41
Safety Information
4 English
Precautions
•
Ensure that the AC power in your house
matches the requirements listed on the
identification sticker located on the back of
your product.
•
Install your product horizontally, on a
suitable base (furniture), with enough space
around it for ventilation (3 - 4 inches/7.5 -
10 cm).
•
Do not place the product on amplifiers or
other equipment which may become hot.
Make sure the ventilation slots are not
covered.
•
Do not stack anything on top of the product.
•
Before moving the product, ensure the Disc
tray is empty.
•
To turn off the product completely, disconnect
the AC plug from the wall outlet. Disconnect
the AC plug from the wall outlet if you will be
leaving the device unused for a long period of
time.
•
During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due
to lightning could damage the product.
•
Do not expose the product to direct sunlight
or other heat sources. This could cause the
product to overheat and malfunction.
•
Protect the product from moisture, and
excess heat or equipment creating strong
magnetic or electric fields (i.e. speakers.).
•
Disconnect the power cable from the AC
supply if the product malfunctions.
•
Your product is not intended for industrial
use. It is for personal use only.
•
Condensation may occur if your product or a
disc has been stored in cold temperatures. If
transporting the product during the winter,
wait approximately 2 hours until the product
has reached room temperature before using.
•
The batteries used with this product
contain chemicals that are harmful to the
environment. Do not dispose of batteries in
the general household trash.
•
Place the loudspeakers at a reasonable
distance on either side of the system to
ensure good stereo sound.
•
Direct the loudspeakers towards the listening
area.
•
Do not expose this apparatus to dripping or
splashing. Do not place objects filled with
liquids, such as vases, on the apparatus.
•
To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power
plug must be readily accessible at all times.
•
Use only a properly grounded plug and
receptacle.
•
An improp
ergroundmaycauseelectricshock
orequipmentdamage.(ClasslEquipmentonly.)
Disc Storage & Management
•
Holding Discs
- Fingerprints or scratches on a disc may
reduce sound and picture quality or cause
skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that
fingerprints will not get on the surface.
- Do not stick paper or tape on
the disc.
•
Cleaning Discs
- If you get fingerprints or dirt on a disc,
clean it with a mild detergent diluted in
water and wipe with a soft cloth.
- When cleaning, wipe gently from the
inside to the outside of the disc.
•
Disc Storage
`
Do not keep in direct sunlight.
`
Keep in a cool, ventilated area.
`
Keep in a clean, protective
jacket and store vertically.
•
Condensation may form if warm air comes
into contact with cold parts inside the
product. When condensation forms inside
the product, it may not operate correctly. If
this occurs, remove any discs in the product,
and then let the product stand for 1 or 2
hours with the power on.
02793F-MX-JS5000-ZA-ENG-20150224.indd 4 2016/2/3 15:32:42
01 Safety Information
5 English
Disc and Format Compatibility
This product does not support Secure (DRM)
Media files.
CD-R Discs
•
Some CD-R discs may not be playable
depending on the disc recording device (CD-
Recorder or PC) used to burn music onto the
disc and the condition of the disc.
•
Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80
minutes as they may not be played back.
•
Some CD-RW (Rewritable) media may not
be playable.
•
Only CD-Rs that are properly "closed" can be fully
played. If the session is closed, but the disc is left
open, the product may not be able to fully play
the disc.
MP3-CD Discs
•
Only CD-R discs with MP3 files in ISO 9660
or Joliet format can be played.
•
MP3 file names should contain no blank
spaces or special characters (for example, /,
=, +).
•
Use discs recorded with a compression/
decompression data rate greater than
128Kbps.
•
Only consecutively written multisession discs
can be played. If there is a blank segment in
a Multisession disc, the disc can be played
only up to the blank segment.
•
If a disc is not closed, it will take longer to
begin playback and not all of the recorded
files may play.
•
If a file is encoded in the Variable Bit Rate (VBR)
format,( i.e. files encoded in both low bit rate and
high bit rate - 32Kbps ~ 320Kbps), the sound may
skip during playback.
•
A maximum of 999 files can be played per
CD/USB device.
Supported Audio Formats
File
Extension
Audio
Codec
Sampling
Rate
Bit Rate
*.mp3
MPEG 1
Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2
Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5
Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
*.wma
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
| NOTES |
✎
Does not support the WMA Professional
codec.
✎
The table above shows supported formats,
sampling rates, and bit rates. Files recorded
in formats that are not supported may not
be played properly.
02793F-MX-JS5000-ZA-ENG-20150224.indd 5 2016/2/3 15:32:42
Contents
6 English
FUNCTIONS
12 The Display function
12 Playing a CD
12 Loading a Compact Disc
12 CD/MP3/CD-R Playback
13 Selecting a Track
13 Searching for a Specific Music Passage
on a CD
13 Repeat One or All Tracks on a CD
14 Playing USB Devices
14 USB Device Playback
14 To Select a File from a USB Device
14 To Search a Folder Quickly
14 To Use High Speed Search
15 To Delete a File
15 To safely remove a USB device
15 Read Before Connecting USB Storage
Devices
15 Searching for a Track Quickly
16 Using the My List Function
16 Checking or Editing My List Tracks
17 Bluetooth
17 What is Bluetooth?
17 To connect the Hi-Fi Component to a
Bluetooth device
18 To disconnect the Bluetooth device from
the Hi-Fi Component
18 To disconnect the Hi-Fi Component
from the Bluetooth device
19 Using Bluetooth Power On
19 Using Samsung Audio Remote App
20 TV SoundConnect
20 Connecting the Hi-Fi Component to a
SoundConnect Compatible Samsung TV
20 To disconnect the TV from the Hi-Fi
Component
20 To disconnect the Hi-Fi Component
from the TV
21 Using My Karaoke
21 Auto Change Function
22 Listening to the Radio
22 To Store the Stations You Want
22 Selecting a Stored Station
22 Timer Function
22 Setting the Clock
22 Setting the Timer
24 Cancelling the Timer
24 The Recording Function
24 Basic Recording
25 Recording Speed
26 Special Sound Effects
26 Selecting PRESET EQ Mode
26 Selecting USER EQ Mode
26 FOOTBALL MODE function
27 GIGA MODE Function
27 NON-STOP RELAY Function
27 Software update
GETTING STARTED
7 Front Panel
8 Rear Panel
9 Accessories
10 Remote Control
11 Attaching the Toroidal Ferrite Core to the
Cord of the Speaker cable(optional)
APPENDIX
28 Troubleshooting
29 Specifications
SAFETY INFORMATION
2 Warning
4 Precautions
4 Disc Storage & Management
5 Disc And Format Compatibility
02793F-MX-JS5000-ZA-ENG-20150224.indd 6 2016/2/3 15:32:43
02 Getting Started
Getting Started
7 English
j
5 6
c
7
&
1
4
3
*
d
(
2
g
$
^ %
)
e
b
f
@
8
a
9
0
!
#
i
h
Front Panel
1
AUX 1/2 button
2
FOLDER - button
3
Display Panel
4
VOLUME/JOG
5
FOLDER + button
6
TUNER button
7
PLAY/PAUSE button
8
POWER button
Press this button to switch your product
on or off.
9
TV SOUND CONNECT button
0
Bluetooth button
!
MY LIST button
@
USB REC button
#
USB 1/2 button
$
USB 2 jack for Playing and USB
Recording
%
USB 1 jack for Playback only
^
FORWARD SEARCH/SKIP button
&
OPEN/CLOSE button
*
MEMORY button
(
DISC slot
)
ENTER button
a
SEARCH button
b
CD button
c
BACKWARD SEARCH/SKIP button
d
STOP button
e
MIC 2 jack
f
MIC 1 jack
g
AUTO CHANGE button
h
FOOTBALL MODE button
i
DISPLAY / DEMO button
j
USER EQ button
k
PRESET EQ button
l
GIGA SOUND BLAST button
k
l
02793F-MX-JS5000-ZA-ENG-20150224.indd 7 2016/2/3 15:32:44
Getting Started
1
AUX IN 1 Terminals
1.
Use an audio cable with a 1/8th inch stereo
plug (not supplied) to connect an external
device such as an MP3 player to the product.
•
Connect AUX IN 1 on the rear panel of the
product to the Audio Out of an external
device/MP3 player.
•
Press the AUX 1/2 button to select AUX1.
2
AUX IN 2 Terminals
1.
Use an Audio Cable (not supplied) to
connect AUX IN 2 on the product to Audio
Out on the external analog output device.
•
Be sure to match connector colors.
•
If the external analog output device has
only one Audio Out jack, connect either left
or right terminal.
•
Press the AUX 1/2 button to select the AUX 2.
•
When the product is in AUX mode, if no
buttons are pushed for 8 hours, the power
will automatically turn off.
3
FM Antenna Terminals
1.
Connect the FM antenna to the FM antenna
connector terminal.
2.
Slowly move the antenna wire until you find a
location where reception is good, then fasten it to a
wall or other rigid surface.
3.
If reception is poor, you may need to install an
outdoor antenna. To do so, connect an outdoor
FM antenna to the FM jack on the rear of the
system using a 75Ω coaxial cable (not supplied).
4
ONLY FOR SERVICE
This jack is for service only. Please do not use.
5
4.0 CH Speaker Terminals (MX-JS5000)
4.1CH Speaker Terminals (MX-JS5500)
1.
To achieve the correct sound quality,
when you connect the speakers, match
the color of the speaker plugs to the color
of the speaker jacks.
•
LEFT channel (marked ).
•
RIGHT channel (marked ).
•
Front and Tweeter speakers together.
•
Don't force the Purple SUBWOOFER
connector or into the White or Red
speaker jack.
6
POWER
•
Insert only provided power cable.
7
Cooling fan
•
The fan operates most of the time while
the unit is powered on.
However, if you set the unit to its minimum
volume, the fan won't operate.
Provide a minimum of 4 inches (10 cm)
of clear space on all sides of the fan when
you install the product.
Rear Panel
MX-JS5000
2
3
4
5
6
7
1
MX-JS5500
2
3
4
5
6
7
1
8 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 8 2016/2/3 15:32:44
02 Getting Started
Accessories
Check for the supplied accessories below.
User Manual
(AH68-02793F)
Remote Control / Batteries
(AH59-02694B/4301-000116)
FM Antenna
(AH42-00021A)
Power Cable
(3903-000598)
Toroidal ferrite core
(3301-000144)(optional)
•
Figures and illustrations in this user's manual are provided for reference only and may differ
from actual product appearance.
(For Front Speakers
cable 1EA)
9 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 9 2016/2/3 15:32:45
Installing Batteries In The Remote Control
•
Place batteries in the remote control so that
the polarities match the illustrations in the
battery compartment : (+) to (+) and (–) to
(–).
•
Do not dispose of batteries in a fire.
•
Do not short circuit, disassemble, or overheat
the batteries.
•
There is the danger of an explosion if
you replace the batteries with the wrong
battery type. Replace only with the same or
equivalent type.
•
The remote control can be used up to
approximately 23 feet (7 meters) in a
straight line from the system.
Remote Control
Power
Bluetooth
TUNING MODE
PLAY/PAUSE
TIMER SET
MY KARAOKE
CD
USB
TUNER
AUX
PRESET EQ
STOP
FOOTBALL
MY LIST
TIMER ON/OFF
BEAT WAVING (This function is not
available on this product.)
MIC VOLUME –, +
DELETE
CD OPEN/CLOSE
TV SoundConnect
REC SPEED
MO/ST
DISPLAY
MEMORY
REPEAT
AUTO CHANGE
SEARCH
SLEEP (Set a sleep time to shut off the
product.)
,
,
.
SEARCH
USB REC
NON-STOP MUSIC RELAY
GIGA
MUTE (Turn off the sound temporarily.
Press again to turn the sound back on.)
TUNING/SKIP
USER EQ
VOLUME (–, +)
FOLDER +/-/EFFECT +/-
ENTER
Getting Started
10 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 10 2016/2/3 15:32:46
02 Getting Started
Attaching the Toroidal Ferrite Core to the Cord of the Speaker cable(optional)
Attaching the Toroidal ferrite core to the cord of the
Speaker cable helps prevent RF interference from radio
signals.
1.
Pull the fixing tab of the Toroidal ferrite core to open it.
2.
Make one loops around the core with the cable of the
Speaker cable.
3.
Attach the Toroidal ferrite core to the Speaker cable cord as the figure shows,and
then press it until it clicks.
LOOPING THE CABLE AROUND THE TOROIDAL CORE
Lift up to release the lock and open the core.
Make one loops around the core with the cable.
(Start winding 2 to 4 inches [5-10 cm]
away from the core).
Close the lock.
11 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 11 2016/2/3 15:32:47
Functions
The Display function
You can view available functions on the
display, adjust the brightness of the display,
and set the Display/LED either on or off.
Changing Display mode
Press the DISPLAY/DEMO button on the product.
Each time you press this button, the mode will
change as follows:
•
The DEMO function
The "xxxxW MiNi COMPONENT AUDIO SYSTEM"
is displayed. The "xxxx" will be different depending
on your Model.
•
The Dimmer function
The Dimmer function is selected and the display
darkens.
•
OFF-LED
The LEDs are turned off. However, the dimmer
function continues to work.
•
Clock ON
The Clock is displayed.
•
Display/LED ON
The Display and all LEDs are turned on.
The DEMO MUSIC function
Press the DISPLAY/DEMO button on the product or the
DISPLAY button on the remote control for 10 seconds to
turn on the Demo mode.
Each time you press this button, the mode will
change as follows:
DIMMER
;
OFF-LED
;
--:-- [time display]
;
ON-LED
;
DEMO
To cancel the Demo music mode
•
Press the DISPLAY/DEMO button on the product
or DISPLAY on the remote control for 10 seconds
again.
The current mode is cancelled and the product is
turned off.
•
Press the TUNER,AUX 1/2, CD,Bluetooth, TV SOUND
CONNECT, or USB button on the product.
The current mode is cancelled and the mode is
changed to the mode you selected.
| NOTES |
✎
When the Demo mode is on, only the POWER
( ) button, VOL buttons, MUTE button, and the
buttons mentioned above work.
✎
The DEMO sampler plays for about 3 minutes.
When DEMO sampler play is complete, the DEMO
message will remain in the display on the front
panel until you cancel DEMO mode.
Playing a CD
Loading a Compact Disc
You can play standard compact discs that
require no adapter.
1.
Place a disc gently into the disc tray with
the disc's label facing up. The disc will be
played automatically.
•
You can load or unload compact discs
when the radio, USB, or auxiliary source
function is selected. When you press
the OPEN/CLOSE button, the unit will
exit the current function and enter CD
mode.
•
If no buttons are pressed on the product
or remote control for more than 3
minutes when the product is in Pause
mode, it will change to Stop mode.
•
If no buttons are pressed on the product
or remote control for more than 25
minutes when the product is in Stop
mode, the product will turn off.
CD/MP3/CD-R Playback
| IMPORTANT |
✎
This product is designed to play the
following audio disc types: CD, CD-R, CD-
RW.
1.
Place a disc gently into the disc tray with
the disc's label facing up.
2.
The disc will be played automatically.
•
For MP3/WMA file, it may take several
minutes for the product to finish
scanning the disc tracks.
•
If you play a file with an English title, the
song title will be shown in the display.
(Titles in other languages can not be
displayed.)
•
An English-titled track containing a
special character (@, $, *, etc.) will not
be displayed.
<CD PlaybackDisplay>
Track Indicator
Playtime Indicator
1 0:19
12 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 12 2016/2/3 15:32:48
03 Functions
3.
To adjust the volume:
•
Turn the VOLUME control on the
product.
•
Press the VOL+ or VOL- button on the
remote control.
The volume level can be adjust in 31
steps (VOLUME MIN, VOLUME 01 ~
VOLUME 29, and VOLUME MAX).
4.
Pausing playback on the Main Unit
To pause playback temporarily, press the
button.
Press again to continue playing the
disc.
Remote control
To pause playback temporarily, press the
button.
Press the button to continue playing
the disc.
5.
To end playing, press the
5
button.
| NOTES |
✎
If no CD is in the disc slot, “NO DISC”
appears on the display.
✎
The quality of MP3/CD-R playback may vary
depending on the condition of the disc or
the condition of the recorder used to record
the disc.
✎
If a disc contains different types of files or
unnecessary folders, you will have problems
with playback.
✎
Gently place a CD into the disc slot. Do not
apply excessive force.
- Do not apply force to the product or
place a heavy object on the product.
- Do not place an out-of-spec or oddly
shaped CD (heart shaped, octangular,
etc.).
It may damage the product.
- Carefully maintain your CDs.
Selecting a Track
You can select a desired track while the disc is
being played.
To play the previous track
Press the
1
button within 3 seconds after the
current track has started playing.
Press the
1
button twice 3 seconds or more
after the current track starts playing.
To play the next track
Press the
2
button.
To play the current track from the
beginning
Press the
1
button 3 seconds after the
current track started playing.
To play the track of your choice
Press the
1
or
2
button to move to a desired
track.
•
You can select a track directly without the
[
or
]
button. (refer to the page 15)
Searching for a Specific Music Passage
on a CD
When listening to a CD, you can quickly search
for a specific music passage on a track.
Forward Search ...................
3
Backward Search .................
4
Press ...
CDDA MP3/WMA
3
(
1
➞
(
2
➞
(
3
➞
(
4
(
4
4
) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4 ) 4
You can also press and hold the
1
,
2
buttons on the product to automatically scan
for a track.
•
The product does not play audio when in the
(
,
)
3 or
(
,
)
4 fast search mode.
Repeat One or All Tracks on a CD
You can play a CD or tracks on a CD
repeatedly.
1.
Press the REPEAT button.
Each time you press this button, the mode
changes as follows:
MP3/WMA : OFF
;
TRACK
;
DIR
;
ALL
;
RANDOM
CD : OFF
;
TRACK
;
ALL
;
RANDOM
13 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 13 2016/2/3 15:32:48
Functions
2.
When you want to stop the repeat
function, press the REPEAT button until
"OFF" is displayed.
•
OFF : Cancels repeat playback.
•
TRACK : Repeatedly plays the selected track.
•
DIR (DIRECTORY) : Repeatedly plays all tracks
in the selected folder.
•
ALL : Repeatedly plays the entire disc.
•
RANDOM : Plays tracks in random order.
Playing USB Devices
Connect an external storage device such as a USB
flash memory stick or external HDD (Hard Disk Drive)
to the product. You can play files in MP3/WMA
format.
USB Device Playback
1.
Connect the external USB storage device
to your product.
2.
Select the USB mode by pressing the
button on the product or the USB button
on the remote control.
3.
The first file of the first directory plays
automatically.
4.
To stop playing
Press the
5
button to stop playing.
| NOTE |
✎
To remove the USB device
- If you press the
5
button again, you can
remove the USB device safely.
| IMPORTANT |
✎
Do not connect a USB recharger to the USB port
of this product. You can damage the product.
To Select a File from a USB Device
You can select an MP3 file while the product is
playing.
| NOTES |
✎
If you want to move to the previous/next track,
press the
1
,
2
buttons briefly.
-
The unit moves to the previous/next file within
the directory.
✎
If you press the
1
,
2
buttons more times than
the number of the files in the directory, the unit
moves to the next directory.
To repeat one or all tracks
1.
Press the REPEAT button.
Each time you press this button, the mode
changes as follows:
OFF
;
TRACK
;
DIR
;
ALL
;
RANDOM
2.
When you want to stop the repeat
function, press the REPEAT button until
"OFF" is displayed.
•
OFF : Cancels repeat playback.
•
TRACK : Repeatedly plays the selected
file.
•
DIR (DIRECTORY) : Repeatedly plays all
files in the selected folder.
•
ALL : Repeatedly plays all files.
•
RANDOM : Plays files in random order.
| NOTE |
✎
For Random play: If the file you selected to play is
located in a folder, all the files in that folder are
played in random order. If the file you selected is
located in the root folder, all files in the root folder
will be played in random order.
To Search a Folder Quickly
1.
Press the
or
button on the remote
control to move to the previous/next
folder.
2.
When the search is done, you will see the
previous/next folder name. The first track
in the folder will start playing.
To Use High Speed Search
You can search through a section quickly while the
product is playing.
Pressthe
3
,
4
button.
• Eachtimeyoupressthebutton,youmove
forward/backwardquicklythroughthesection.
| IMPORTANT |
✎
The product does not output sound during a high
speed search.
✎
You can also
pressandholdthe
1
or
2
button
onthemainunittoautomaticallyscanfora
track.
14 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 14 2016/2/3 15:32:49
03 Functions
To Delete a File
You can delete a file from your USB device.
1.
Select a file you want to delete.
2.
Press the DELETE button on the remote
control. "DEL N" is displayed.
3.
Press the DELETE button on the remote
control or press the
1
,
2
until "DEL Y"
is displayed.
4.
When “DEL Y” is displayed, press the
¬
button. “DELETE END” appears and the
deletion is completed.
| NOTE |
✎
The NTFS file system are not supported.
To safely remove a USB device
1.
Press the
5
button twice while the USB is
playing or press the
5
button once when
play has stopped.
2.
When the REMOVE message appears on
the display, remove the USB device.
Read Before Connecting USB Storage
Devices
•
Some USB devices may not work properly with this
product. The maximum current supported by the
USB port for an external device is 500 mA (at 5V
DC).
•
This product only supports external HDD`s that are
formatted in the FAT 16,FAT 32 file system.
•
USB 2.0 HDDs should be connected to a separate
power source. Otherwise, the USB 2.0 HDDs will
not work.
•
If multiple USB external storage devices are
connected together, only the files in the first HDD
will be played.
•
If a usb external device that has multi
partition,only the first partition which support file
system is recognized.
•
Files with DRM are not supported. Digital Right
Management (DRM) restricts unauthorized access
to a DRM file so that the file is protected from
piracy.
•
Even if a file has an .mp3 extension, the file cannot
be played if it is formatted in MPEG layer 1 or 2.
•
Do not use an unrecognized USB hub.
•
Only the first 15 characters of an audio file name
are shown on the product's display.
•
Only removable HDDs with less than 160GB are
supported. Depending on the device, a 160GB or
more removable HDD may not be supported.
•
It can take several minutes for the product to
recognize the files on some USB devices.
•
Some USB devices (USB HDDs, in particular) may
pause when moving from track to track.
•
With USB storage devices supporting USB VER1.1
only, the product may access files slowly or may
not recognize the file properties.
•
The maximum electrical current provided by each
USB port to connected USB devices is 0.5A (based
on DC 5V).
•
If there is no USB connection or the STOP mode
lasts for more than 25 minutes, the product will
automatically turn off.
•
Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones may not
be supported.
•
A maximum of 999 files can be played per USB
device.
Searching for a Track Quickly
You can select a track directly without the
1
,
2
button.
CDDA/MP3-CD/USB
1.
Press the
SEARCH
button.
After pressing the
SEARCH
button, press
the
,
or
.
button on the remote control
or turn the
VOLUME/JOG
control on the
product to the left or right to select a
desired track.
•
You can move to the selected track
directly.
2.
When the search is complete, the track
will automatically start playing.
<Search Display>
0 12 0 25
Total track
Indicator
Selected Track
Indicator
15 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 15 2016/2/3 15:32:49
Functions
Using the My List Function
This function is available during playback of a
CDDA or MP3/WMA file on a CD-ROM/USB
device.
•
You can use the My List function to set up the
playback order of up to 99 tracks of your choice.
1.
Press the
MY LIST
button to display the
message below:.
L0 1 --
(01= My List number, -- = track number)
2.
Use the VOLUME/JOG control on the main
unit or use the
1
or
2
or
,
,
.
buttons
to move to a desired track.
•
Turn the VOLUME/JOG Control left or
right on the main unit to move to the
previous/next track.
•
Press
1
,
.
to move to the previous
track.
•
Press
2
,
,
to move to the next track.
3.
Press the
¬
button to confirm your
selection. The selection is stored and
L0 2 --
is displayed.
4.
To select another track, follow Steps 2 and
3 above.
5.
Press the button
or press the MY LIST
button on the remote control
to play the My
List tracks.
•
In stop mode, when the My List setting
is done, press the button to play the
tracks of My List.
6.
Press and hold the
MY LIST
button to
select
OFF-MY LIST
to exit the My List
mode.
• Each time you press and hold the MY LIST
button on the remote control, the mode
will switch as follows: OFF-MY LIST
;
ON-
MY LIST.
ON-MY LIST : Enter the My List mode.
OFF-MY LIST : Exit the My List mode.
•
If you open the disc tray or turn off the
product, your My List will be cancelled.
•
If you remove usb device, the current USB
function my list mode will be cancelled.
•
If you switch to another mode, CD/USB ON
-MY LIST mode is maintained.
•
When the recording or copy is completed, the
My List of the USB 2 will be cancelled.
•
In CD/USB ON MY LIST mode, if you press the
USB REC, SEARCH, DELETE, or
or
buttons, these functions will not work, and the
unit will display "MY LIST PLAY".
Checking or Editing My List Tracks
You can check and edit a list of My List tracks.
1.
If a My List track is being played, press the
MY LIST
button.
2.
Press the
ENTER
button to display the
message below:
C0 1 02
or
0 1 002
(01= My List number, 02 or 002= track number)
3.
Repeatedly press the
¬
button or press
the or button until the desired
track is displayed.
4.
Press the VOLUME/JOG control on the
main unit or press
the
1
or
2
button to
select a different track.
5.
Press the
¬
button to confirm your
selection.
6.
To play the My List tracks, press
the MY
LIST button on the remote control or press
the button.
•
When using the Checking or Editing the
Track functions of the My List mode, you
can use the DELETE button to remove a
track from the My List track list.
1. Press the DELETE button on the remote
control. "DEL N" is displayed.
2. Press the DELETE button on the remote
control or press the
[
or
]
button until
"DEL Y" is displayed.
3. When “DEL Y” is displayed, press the ENTER
button on the remote control. "REMOVE"
appears and the removal is complete.
16 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 16 2016/2/3 15:32:50
03 Functions
Bluetooth
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without
wires!
What is Bluetooth?
Bluetooth is a technology that enables
Bluetooth compliant devices to interconnect
easily with each other using a short, wireless
connection.
•
A Bluetooth device may cause noise or
malfunction, depending on usage, when:
- A part of your body is in contact with
the receiving/transmitting system of the
Bluetooth device or the Hi-Fi Component.
- It is subject to electrical variation from
obstructions caused by a wall, corner, or
office partitioning.
- It is exposed to electrical interference from
same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
•
Pair the Hi-Fi Component with the Bluetooth
device while they are close together.
•
The greater the distance between the Hi-Fi
Component and the Bluetooth device, the
worse the quality. If the distance exceeds the
Bluetooth operational range, the connection
is lost.
•
In poor reception areas, the Bluetooth
connection may not work properly.
•
The Bluetooth connection only works
when the Bluetooth device and the Hi-
Fi Component are close together. The
connection will be automatically cut off
if the Bluetooth device is out of range.
Even within range, the sound quality may
be degraded by obstacles such as walls or
doors.
•
This wireless device may cause electric
interference during its operation.
To connect the Hi-Fi Component to a
Bluetooth device
Before you begin, confirm that your Bluetooth
device supports the Bluetooth-compliant
stereo headset function.
1.
Press the Bluetooth button of the Hi-Fi
Component to display the BT message.
•
You will see WAIT for a short period of
time and then BT READY on the front
display of the Hi-Fi Component.
2.
Select the Bluetooth menu on the
Bluetooth device you want to connect.
(Refer to the Bluetooth device's user
manual.)
3.
Select the Stereo headset menu on the
Bluetooth device.
•
You will see a list of scanned devices.
4.
Select "[Samsung] HI-FI xxxxxx J-Series"
from the list.
•
When the product is connected to the
Bluetooth device, it will display Device
name
;
BT on the front display.
•
If the Bluetooth device has failed to pair
with the product , delete the previous
“[Samsung] HI-FI xxxxxx J-Series” found
by the Bluetooth device and have it
search for the product again.
5.
You can listen to the music playing on the
connected Bluetooth device over the Hi-Fi
Component system.
•
In Bluetooth mode, some model's
Play/Stop/Next/Back functions are not
available.
| NOTES |
✎
The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
✎
The AVRCP feature is not supported.
✎
Connect only to a Bluetooth device that
supports the A2DP (AV) function.
✎
You cannot connect to a Bluetooth device
that supports only the HF (Hands Free)
function.
✎
Only one Bluetooth device can be paired at
a time.
✎
You may be required to enter a PIN code
(password) when connecting the Bluetooth
device to the Hi-Fi Component. If the PIN
code input window appears, enter <0000>.
17 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 17 2016/2/3 15:32:50
Functions
✎
Once you have turned off the Hi-Fi
Component and pairing is terminated,
pairing will not be restored automatically. To
reconnect, you must pair the device again.
✎
The Hi-Fi Component system may not search
or connect properly in the following cases:
- If there is a strong electrical field around
the Hi-Fi Component.
- If the Bluetooth device is turned off, not
in place, or malfunctions.
✎
Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, which can cause electric
interference.
To disconnect the Bluetooth device
from the Hi-Fi Component
You can disconnect the Bluetooth device from
the Hi-Fi Component. For instructions, see the
Bluetooth device's user manual.
•
The Hi-Fi Component will be disconnected.
•
When the Hi-Fi Component is disconnected
from the Bluetooth device, the Hi-Fi
Component will display BT DISCONNECTED
;
BT READY on the its display.
To disconnect the Hi-Fi Component
from the Bluetooth device
Press the another mode button on the front
panel of the Hi-Fi Component to switch from
Bluetooth mode to another mode or turn off
the Hi-Fi Component. The currently connected
device is disconnected.
| NOTES |
✎
The connected Bluetooth device will wait a
certain amount of time for a response from
the Hi-Fi Component before terminating the
connection.(Disconnection time may differ,
depending on the Bluetooth device)
✎
In Bluetooth connection mode, the
Bluetooth connection may be lost if the
distance between the Hi-Fi Component and
the Bluetooth device exceeds 16.25 feet (5
meters).
✎
If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the Hi-Fi Component to restore the
pairing with the Bluetooth device.
✎
The Hi-Fi Component automatically turns
off after 25 minutes in the Ready mode.
✎
When a Bluetooth device is connected
to the Hi-Fi Component system, the
Component system automatically switches
to the Bluetooth mode if it is in a different
mode (except when it is displaying
"REQUEST" in the TV SoundConnect mode
if the Bluetooth device haven't been paired
with the HiFi Component before.).
18 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 18 2016/2/3 15:32:51
03 Functions
Using the Samsung Audio Remote App
Installing the Samsung Audio Remote
App
To control the product with your Smart
Device and the Samsung Audio Remote app,
download the Samsung Audio Remote App by
accessing the app through Google Play store.
Accessing the Samsung Audio Remote
App
After you install the Samsung Audio Remote
app, follow the instructions in the app.
| NOTE |
✎
The APP function only supports Android
mobile phone devices running Android OS
3.0 or later.
Using Bluetooth Power On
When the product is turned off, you can
connect your smart device to the product via a
Bluetooth connection to turn it on.
1.
Press and hold the Bluetooth button to
set the Bluetooth Power On function on.
ON-BLUETOOTH POWER appears on the
display.
2.
When the product is off, connect
your smart device to the product via
Bluetooth. (For information on Bluetooth
connections, refer to your smart device’s
manual.)
•
The Bluetooth device must have been
paired with the Hi-Fi Component before.
3.
When the connection is complete, the
product turns itself on automatically in
Bluetooth mode.
•
Select the desired music to play from
your smart device.
| NOTE |
✎
Press and hold the Bluetooth button to
turn the Bluetooth Power On function on
or off.Each time you press and hold this
button, the Hi-Fi Component displays ON
-BLUETOOTH POWER
;
OFF-BLUETOOTH
POWER on its display.
19 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 19 2016/2/3 15:32:52
TV SoundConnect
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Hi-Fi Component by using the TV
SoundConnect function.
Connecting the Hi-Fi Component to a
SoundConnect Compatible Samsung
TV
Before activating this function, be sure to
activate the Samsung TV's SoundConnect or
SoundShare mode.
1.
Press the TV SoundConnect button of
the Hi-Fi Component to display the TV
SOUNDCONNECT message.
WAIT
;
SEARCH
;
REQUEST
2.
Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to
the TV's user manual for details.)
3.
When the Hi-Fi Component is connected
to the TV, it will display [TV] Name
;
CONNECTED
;
TV on the front display.
4.
The audio from the connected TV plays
over the Hi-Fi Component system.
| NOTES |
✎
In TV SoundConnect mode, the Play/
Repeat/Stop/Next/Back functions are not
available.
✎
The SoundConnect feature is available on
some Samsung TVs released since 2012.
Check whether your TV supports the
SoundShare or SoundConnect function.
(For further details, refer to the TV's user's
manual.)
✎
If you unplug the Hi-Fi Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Hi-Fi
Component into an outlet, and then set the
TV SoundConnect connection again.
✎
Only one Hi-Fi Component at a time can be
connected to a TV via TV SoundConnect.
✎
To connect to another TV in TV
Soundconnect mode, press the button
for more than 5 seconds, and then connect
to the other TV by following the directions
above.
To disconnect the TV from the Hi-Fi
Component
You can disconnect the TV from the Hi- Fi
Component.
For instructions, see the TV's user manual.
•
When the Hi-Fi Component is disconnected
from the TV, the Hi-Fi Component will
display TV DISCONNECTED
;
REQUEST on
its display.
To disconnect the Hi-Fi Component
from the TV
Press another mode button on the front panel
of the Hi-Fi Component to switch from TV
SoundConnect mode to another mode or
turn off the Hi-Fi Component. The currently
connected device is disconnected.
| NOTES |
✎
The connected TV will wait a certain
amount of time for a response from the
Hi-Fi Component before terminating the
connection.(Disconnection time may differ,
depending on the TV)
✎
The connection may be lost or sound may
stutter if the distance between the TV and
the Hi-Fi Component exceeds 6.5 feet (2 m).
✎
Instability in the network environment may
cause the connection to be lost or sound to
stutter.
✎
In TV SoundConnect mode, the Hi-Fi
Component automatically turns off after 25
minutes if it is not connected to a TV.
Functions
20 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 20 2016/2/3 15:32:52
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
