PRODUCTIVITY
Square Fold Booklet-Makers
1-800-OK-CANON
www.usa.canon.com
Canon U.S.A., Inc.
One Canon Park
Melville, NY 11747
2
IN-LINE FINISHING SIMPLE INTERFACE REPORTS, MANUALS, AND MORE
Synergy for in-line use with
Canon production printers
The Square Fold Booklet-Maker line of finishing
solutions work in-line with Canon
imagePRESS®
These
highly productive solutions provide
professional,
square-folded booklets that are ideal
for a wide
range of on-demand applications. For your most
Booklet-Maker delivers complete, full-bleed
printing and booklet-making. Reports, brochures,
manuals, policy documents, and more can be
quickly printed and finished in one streamlined
operation, without the need for additional
handling or finishing steps in between. The
square-fold finish allows for printing on the
spine, further increasing the booklet’s value
to the customer.
Streamlined, reliable, and professional results.
Customers in today’s market demand in-line finishing options.
Now you can easily deliver high-quality, square-edged booklets
that provide professional-looking results.
FINISHING POWER
KEY FEATURES SQUARE FOLD BOOKLET-MAKER SQUARE FOLD BOOKLET-MAKER
WITH TWO-KNIFE TRIMMER
Finishing Power
spine creator
spine creator
Highly Reliable
for Two-Knife Trimmer
Easy to Operate
control panel control panel
Outstanding
Eciency booklets/hour [20 lb. Bond, booklets/hour [20 lb. Bond,
*
Maximum quantity of booklets will depend on the speed of the configured engine.
FULL-BLEED BOOKLETS
BLM300C PROFESSIONAL BOOKLET-MAKER
3
IN-LINE FINISHING SIMPLE INTERFACE REPORTS, MANUALS, AND MORE
Precision finishing
Specially designed with an extended output
belt for high reliability, the Square Fold
Booklet-Maker and Square Fold Booklet-
Maker with Two-Knife Trimmer can run long
production cycles, without the need for
operator intervention.
The Two-Knife Trimmer can be easily set
up through a digital display. The side trim
can be adjusted quickly and with precision.
Various jobs can be saved in memory.
And its compact design means minimal
production space is required to implement
these expanded capabilities.
BOOKLET SPECIFICATIONS FOR SQUARE FOLD BOOKLET-MAKER WITH TWO-KNIFE TRIMMER**
Bypass Mode
Minimu
Staple Position
Minimum: 1.57"
4.71" - 9.6"
Maximum Oset
0.08" - 1.38"
Before trimming:
4.71" – 9.6"
(119.7 mm – 243.84 mm)
Maximum oset: +/- 0.59" (15 mm)
0.08" – 1.38"
(2 mm – 35 mm)
0.08" – 1.38"
(2 mm – 35 mm)
After trimming:
7.87" – 12.6"
(200 mm – 320 mm)
8.27
– 13
(210 mm – 330 mm)
**
PROFESSIONAL SQUARE SPINE SQUARE FOLD BOOKLET-MAKER SQUARE FOLD BOOKLET-MAKER
WITH TWO-KNIFE TRIMMER
PRODUCT SPECIFICATIONS
* Infeed must come from Canon Trimmer-D1 and is incompatible with Canon Two-Knife Trimmer-A1.
** Maximum quantity of booklets will depend on the speed of the configured engine.
*** Infeed must come from Canon High-Capacity Stacker-F1 or G1.
▲
Supported with PRISMAsync, imagePRESS Server A3300/A2300/A1300, and Creo A7300 only.
▲▲
Not supported with imagePRESS Printer Kit.
† Booklet-Maker with Belt Stacker including Trimmer, Two-Knife Trimmer, and Square Fold Module.
†† +59° F to +86° F for Rotator, Two-Knife Trimmer, Belt Stacker
‡‡ Rotator - 100-127 V 4 A, upon request.
° Hand-feeding mode, printer speed dependent.
GENERAL SQUARE FOLD BOOKLET-MAKER* SQUARE FOLD BOOKLET-MAKER
WITH TWO-KNIFE TRIMMER*
SDD BLM300C PROFESSIONAL
BOOKLET-MAKER***
Engine
Compatibility
▲
▲
▲▲
Saddle-Stitch Capacity
Acceptable Paper
Weights
Acceptable Paper
Weights (Cover)
Compliancies
Power Requirement 120 V, 15 A 120 V, 15 A
100-127 V, 8 A
†
220/230 V 2 A
‡‡
Humidity Range
Temperature Range +63° F to +90° F +63° F to +90° F +63° F to 90° F
††
BOOKLET
Minimum Acceptable
Booklet (Input)
Maximum Acceptable
Booklet (Input)
Minimum Finished Size
(Output)
Same as input
°°
Maximum Finished Size
(Output)
Same as input
For the following configurations:
For the following configuration:
Offset Capability To
Be Cut
Maximum Productivity Up to approximately 1,800 booklets/hour
Up to approximately 800 booklets/hour
°°
°
Sheet Capacity
To Create Booklet
Height: 45.26"
14.17" 23.62" 14.17" 35.83"
Width: 87.79"
Service: Same as
Main Unit
Service: Same as
Main Unit
24.9"
61.8"
13.6" 23.4"
Height: 51.2"
Paper Input/Output
Height: 33.8"+/- .08"
Width: 37.4"
Depth: 27.5"
Service: Same as
Main Unit
Service: Same as
Main Unit
Depth: 27.95"
Paper Input/Output
Height: 33.8"+/- .08"
32.3"
Service: Same as
Main Unit
Service: Same as
Main Unit
Height: 48.4"
Paper Input/Output
Height: 33.8"+/- .08"
Width: 13.8"
Depth: 27.5"
1-800-OK-CANON
www.usa.canon.com
Canon U.S.A., Inc.
One Canon Park
Melville, NY 11747
1114R5-SDD/SDDTKT-PDF-IH
Canon and imagePRESS are registered trademarks of Canon Inc. in the United States and may also be registered
trademarks or trademarks in other countries. All other referenced product names and marks are trademarks of
their respective owners. Specifications and availability subject to change without notice. All printer output
images are simulated. Not responsible for typographical errors.
©2014 Canon U.S.A., Inc. All rights reserved.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Canon imagePRESS 1110+ Booklet
-
-
-
-
Canon imagePRESS C1+ Specification
-
-
-
Canon imagePRESS 1110S+ Quick start guide
-
-
Other documents
-
LG LK65C Specification
-
Oce 1060023044 Datasheet
-
-
Formax Square iT Operating instructions
-
-
-
MBM SF 2 Trimmer User manual
-
-
-