NEC MultiSync® LCD1510V Owner's manual

Brand: NEC

Model: MultiSync® LCD1510V

Category: Flat panel accessories

Type: Owner's manual

This manual is also suitable for

NEC MultiSync® LCD1510V boasts a sleek design and advanced features to enhance your computing experience. With its adjustable height, tilt, and swivel functions, you can find the perfect viewing angle for comfortable and ergonomic use. The monitor's high resolution and vibrant colors make it ideal for graphic design, video editing, and gaming. Its versatile connectivity options, including VGA and DVI ports, allow you to connect to a wide range of devices.

Listed below are revisions to user’s manual for MultiSync LCD1510 /

1510V / 1810 / 2010.

This new revision of the monitor does not include shipping screw even though

some picture may have the screw hole described in the “Quick Start” section

of the manual. If you raise, lower or rotate screen or remove monitor stand,

please follow the procedure stated below.

Raise and Lower Monitor Screen

The monitor may be raised or lowered in either Portrait or Landscape mode.

To raise or lower screen, place one hand under bottom of screen, lift or lower

slightly (Figure RL.1) and simultaneously push the button on the bottom back

of the stand (Figure RL.2). Screen will lower while button is pushed in.

Release button to lock screen in place.

Caution: Although the monitor has been designed not to lower automatically

when the button is pushed, ALWAYS support the bottom of the screen with

one hand.

Errata sheet

Figure RL.1

Figure RL.2

Figure R.1

Screen Rotation

Before rotating, the screen must be raised to the highest level to avoid knock-

ing the screen on the desk or pinching your fingers. To raise the screen, place

one hand under bottom of screen, lift up and simultaneously push the button

on the bottom back of the stand (Figure RL.2). To rotate screen, place hands

on each side of the monitor screen and turn clockwise from Landscape to

Portrait or counter-clockwise from Portrait to Landscape (Figure R.1). To

toggle the orientation of the OSM menu between Landscape and Portrait

modes, press the RESET button while OSM menu is off.

Figure R.1

Errata sheet 99.4.1, 8:47 PM1

40mm

Figure S.1

Part Number TBD

Printed in Japan

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1. Disconnect all cables.

2. Place one hand under bottom of screen, lift up and simulta-

neously push the button on the bottom back of the stand

(Figure RL.2) to the maximum height.

Figure S.1

3. Place monitor face down on a non-abrasive surface. Place

the screen on s 2-inch platform so that the stand is parallel

with the surface (Figure S.1).

4. Remove cable cover. Remove the 4 screws connecting the

monitor to the stand and lift off the stand assembly (Figure

S.2). The monitor is now ready for mounting in an alter-

nate manner.

5. Reverse this process to reattach stand.

Figure S.2

55mm

Errata sheet 99.4.1, 8:47 PM2

NEC MultiSync® LCD1510V Owner's manual

Brand: NEC

Model: MultiSync® LCD1510V

Category: Flat panel accessories

Type: Owner's manual

This manual is also suitable for

Download PDF

report

NEC MultiSync® LCD1510V Owner's manual

This manual is also suitable for

NEC MultiSync® LCD1510V Owner's manual

Related papers

Other documents