Cooper Lighting ADY071442 User manual

Type
User manual

This manual is also suitable for

Cooper Lighting ADY071442 is a small, indoor, yoke mount, remote ballast lighting fixture. It is compatible with 10 3/4" and 12 3/4" small remote yokes and can be used with a variety of lamp types, including T6, T4, 4-Pin Triple Tube, and halogen (single ended). The fixture features a PointGrab aiming system that allows for easy and precise aiming of the light beam. The fixture also has a vertical set screw for securing the fixture to the mounting plate and end screws for securing the fixture head to the yoke arm.

Cooper Lighting ADY071442 is a small, indoor, yoke mount, remote ballast lighting fixture. It is compatible with 10 3/4" and 12 3/4" small remote yokes and can be used with a variety of lamp types, including T6, T4, 4-Pin Triple Tube, and halogen (single ended). The fixture features a PointGrab aiming system that allows for easy and precise aiming of the light beam. The fixture also has a vertical set screw for securing the fixture to the mounting plate and end screws for securing the fixture head to the yoke arm.

40
Warning
Visor and Non-Visor
: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
Do not
3
2
Sheet 1 of 2
mount fixtures vertically.
Installation Instructions
Vault
C-Scroll
Roundel
These installation instructions are valid with the above Ametrix styles.
1
Small, INDOOR
YR
(Y
oke mount
, R
emote ballast
)
ADY071442 Rev B (ECN80481)
mounting plate
Using #8-32 mounting screws (by others)
2.
screw and remove
secure mounting plate to J-box.
1.
Loosen vertical set
Mounting plate
Fixing mounting plate to J-box
Fixture head and yoke
Attaching fixture head and yoke to
mounting plate
set screw
#10-32
Exploded view and part call-out
Mounting
plate
J-box
(by others)
Vertical
(by others)
#8-32 Mounting
screws
Fixture head
2.
Aiming the fixture
indicator
re-tighten end screws to secure the position.
Yoke arm Indicator
an additional 10-degrees.
When the fixture head is adjusted to the desired angle,
1.
To aim the fixture, loosen both #10-32 end screws. When
the PointGrab
TM
system indicators are lined up, the slope
of the lens face is 40-degrees. Each subsequent notch is
#10-32 End
screw
#10-32 Vertical
set screw
of mounting plate.
Hook yoke and fixture
head on lower flange
1.
Attach wires ensuring all connections are properly matched.
2.
Angle yoke behind bottom flange on mounting plate and
press together.
3.
Secure fixture using vertical set screw.
3
87.23
8
3 "
1
1
2
"
37.15
2
2
1
88.90
"
J-box
Clearance hole
Slots fit standard 4.5"
(x4)
3
[50.8 mm]
1
4
"
6.35
(x2)
Holes for additional
support into studs.
5
8
"
3
55.79
1
"
137.16
4
1
114.60
2
4 "
2
1
2
"
11.43
Use only GE or Sylvania
CFL Lamps
C-Scroll w/ visor
Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Mounting Plate Dimensions (In and mm)
Lamping Size Chart
: Before starting any work ensure
(lamps provided by others)
Vault w/ visor
Sheet 2 of 2
Warning
Installation Instructions
Visor and Non-Visor
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
Do not
mount fixtures vertically.
Small, INDOOR
YR
(Y
oke mount
, R
emote ballast
)
ADY071442 Rev B (ECN80481)
This side to J-Box
Flange receives bottom
of canopy
Mounting plate is compatible with 10 3/4"(273.05mm) and 12 3/4"(323.85mm) small remote yokes.
1
8
" Aluminum Plate
2.03
FIXTURE SIZE
(inches/ mm)
WATTAGE
# OF
LAMPS
LAMP TYPE LAMP DESCRIPTION
10
3/4
/ 273.05 39 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 70 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 150 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 26 W 1
4-Pin Triple
Tube
Compact Fluorescent
12
3/4
/ 323.85 32 W 1
4-Pin Triple
Tube
Compact Fluorescent
12
3/4
/ 323.85 42 W 1
4-Pin Triple
Tube
Compact Fluorescent
10
3/4
/ 273.05 100 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 150 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 250 W 1 T4 Halogen (Single Ended)
LAMP
(not to scale)
  • Page 1 1
  • Page 2 2

Cooper Lighting ADY071442 User manual

Type
User manual
This manual is also suitable for

Cooper Lighting ADY071442 is a small, indoor, yoke mount, remote ballast lighting fixture. It is compatible with 10 3/4" and 12 3/4" small remote yokes and can be used with a variety of lamp types, including T6, T4, 4-Pin Triple Tube, and halogen (single ended). The fixture features a PointGrab aiming system that allows for easy and precise aiming of the light beam. The fixture also has a vertical set screw for securing the fixture to the mounting plate and end screws for securing the fixture head to the yoke arm.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI