LST 200 Series User manual

Type
User manual

This manual is also suitable for

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
B501_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Detector Base Series 200
B501/B501DG
Description
Specifi cations
The Detector Base B501/B501DG is designed to ac-
commodate intelligent re detectors Series 200 and
500 for use in ADM loops with System Sensor/200
protocol. Due to its robust multi-wire screw terminals,
the detectors can be wired with ease, thus achieving a
secure and durable connection.
The base provides the possibility to easily connect an
external remote indicator, and has been designed for
surface mounting in dry rooms. For special applicati-
ons a range of accessories (for moist room, false cei-
ling or fl ush installation) is available.
A mechanical theft protection of the detector can
optionally be activated at the detector base.
The Detector Base B501DG is 6mm higher than the
Detector Base B501, and is therefore suitable for thick
cables. It has the same height as the Isolator Detector
Base B524IEFT-1.
Suitable for automatic detectors
in ADM loop technology with
System Sensor/200 protocol
Screw terminals for secure
connection of multiple wires
Terminals for connection of remote
indicator
Mechanical theft protection can be
activated
Ambient temperature -30°C to +70°C
Relative humidity 0 – 95% (no condensation)
Colour cream
Detector Base B501
Dimensions ø × H 102 × 20 (mm)
Weight 53g
Order number 246002
Order name Detector Base/Anal./500/200/SS B501
Detector Base B501DG
Dimensions ø × H 102 × 26 (mm)
Weight 57g
Order number 246015
Order name Detector Base/Anal./500/200/SS B501DG
  • Page 1 1

LST 200 Series User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI