LST ND2251EM User manual

  • Hello! I am an AI chatbot trained to assist you with the LST ND2251EM User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
ND2251EM_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Optical Smoke Detector
ND2251EM
Description
Specifi cations
The addressable Optical Smoke Detector ND2251EM
uses the scattered light principle, and was developed
for the detection of smoke particles in a wide range of
applications. The modern design of the sensing cham-
ber allows to reliably evaluate the characteristics of
re.
The proven ADM loop technology with System Sen-
sor/200 protocol establishes a permanent communica-
tion between the re detection control panel and the
detector. That ensures a periodical function testing of
the detector. In the control panel all types of res are
detected by continuously comparing fi re patterns.
The infl uence of contamination on the optical measu-
rement system is compensated for by using intelligent
evaluation algorithms. With that, the response sensiti-
vity of the detector is kept constant for a long time –
a further effective step to avoid false alarms.
The two LEDs with 360° visibility indicate the activated
condition of the detector. The detector address is selec-
ted with two decadic rotary switches, thus allowing to
change the detector without additional tools.
A detector function test can be conveniently conducted
using a magnet. The detector can be attached to va-
rious bases and it can be protected against theft.
ADM loop technology with
System Sensor/200 protocol
Optional connection of remote
indicator
Constant response sensitivity
Extremely fl at design
Function testable with magnet
Operating voltage Supply through loop voltage
Current consumption max. 200µA (quiescent)
Ambient temperature -20°C to +60°C
Relative humidity 10 – 93% (no condensation)
Dimensions ø × H 102 × 45 (mm)
Colour cream
Weight 102g
Approvals VdS G200052
Order number 241010
Order name Optical Smoke Detector/Anal./200/SS ND2251EM
/