Vollrath Lid Holder Installation guide

Type
Installation guide

Vollrath Lid Holder is a convenient and efficient way to store and dispense lids. It can be mounted on a wall or placed on a rotating stand, making it easy to access from any angle. The holder accommodates cups with a rim diameter of up to 4¹⁄₈ inches (10.5 cm) for LD2-2 model and 4⁷⁄₈ inches (12.4 cm) for LD3-2 model, making it suitable for a variety of cup sizes. The holder is made of durable materials and is easy to clean, making it a long-lasting and practical addition to any kitchen or beverage service area.

Vollrath Lid Holder is a convenient and efficient way to store and dispense lids. It can be mounted on a wall or placed on a rotating stand, making it easy to access from any angle. The holder accommodates cups with a rim diameter of up to 4¹⁄₈ inches (10.5 cm) for LD2-2 model and 4⁷⁄₈ inches (12.4 cm) for LD3-2 model, making it suitable for a variety of cup sizes. The holder is made of durable materials and is easy to clean, making it a long-lasting and practical addition to any kitchen or beverage service area.

Installation Instructions
www.vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.624.2051 or 920.457.4851
Main Fax: 800.752.5620 or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Technical Services
Induction Products: 800.825.6036
Countertop Warming Products: 800.354.1970
All Other Products: 800.628.0832
©
2016 The Vollrath Company L.L.C. Part No. 350625-1 ml 8/24/16
Wall/Stand Mounted Lid Dispenser
7.5"
190.5mm
#8 x 1" (4)
2"
50.8mm
Wall Mounting Instructions
1. Drill the mounting holes for the brackets.
2. Install the mounting screws into the brackets.
3. Align the brackets on the dispenser with the
wall-mounted brackets.
4. Slide the dispenser onto the wall-mounted
brackets.
M
ount
i
ng
Wall Mount: See below.
Rotating Stand: See Rotating Stand Assembly Instructions.
Item No.
Accommodates Cups with
Rim Diameter
LD2-2 4¹⁄₈ (10.5 cm)
LD3-2 4⁷⁄₈ (12.4 cm)
  • Page 1 1
  • Page 2 2
  • Page 3 3

Vollrath Lid Holder Installation guide

Type
Installation guide

Vollrath Lid Holder is a convenient and efficient way to store and dispense lids. It can be mounted on a wall or placed on a rotating stand, making it easy to access from any angle. The holder accommodates cups with a rim diameter of up to 4¹⁄₈ inches (10.5 cm) for LD2-2 model and 4⁷⁄₈ inches (12.4 cm) for LD3-2 model, making it suitable for a variety of cup sizes. The holder is made of durable materials and is easy to clean, making it a long-lasting and practical addition to any kitchen or beverage service area.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI