Esschert Design TG5K Installation guide

INSTALLATION FOR HOSE HOLDERS

First determine a location outside (house, shed, etc.) for proper placement. Once

location is determined, you must get mounting hardware that is compatible with

the actual mounting surface (wood, brick, etc.). When determining exact

placement of the hose holder, take into account clearance from the bottom of the

hose holder to the ground. You will need sufficient space from these two points

for the hose. Once exact placement is determined, mark the holes where the

screws will need to go. Pre-drill the holes for the screws. Align hose holder to

pre-drilled holes and drill screws into surface completely.

Download PDF