Pet Crate End Table (Small)
Assembly Instructions
Item Number : 600-4X
Product Name : Pet Crate End Table (Small)
600-4X(Small)
Page 1 of 4
Parts
Hardware
Top Panel (A)
1 Pc.
Bottom Panel (B)
1 Pc.
Left Panel (C)
1 Pc.
Right Panel (D)
1 Pc.
Back Panel (E)
1 Pc.
Door (F)
1 Pc.
F6 x 5/8"
RF10004
Metal Pin
RF40009
Spring
RF40002
Washer
RF44054
JCB M6 x 40
RF10041
L-Bracket
RF50003
Allen Key
RF40103
x 18
x 2
x 2 x 2
x 6
x 6
x 1
600-4X(Small)
Page 2 of 4
D
RF10004
x 4
Step 1.
Attach L-Bracket (RF50003) into the pre-drilled holes on the
Left Panel (C), Right Panel (D) and Back Panel (E)
using 12 screws (RF10004) as per Diag. 1.
Step 2.
Attach Left and Right Panel (C&D) into the pre drilled holes on the Top Panel (A)
using 4 screws (RF10004). Then attach Back Panel (E) using 2 screws (RF10004)
as per Diag.2.
Diagram1.
C
x 6
RF50003
x 12
RF10004
E
Diagram2.
A
D
C
E
RF10004
x 2
600-4X(Small)
Page 3 of 4
x 2
RF40009
x 2
RF40002
x 2
RF44054
F
F
C
B
F
D
A
Step 3.
Attach Bottom panel (B) into the
assembled using 6 screws (RF10041)
as per Diag. 3.
Step 4.
Assemble spring(RF40002) + door pin(RF40009) + washer(RF44054) per diagram.
Warning, hold the pin with nger so it doesn't ew away from the force of the spring.
Gently insert all three part into predrilled holes at the door(see diagram).
Slide the top pin into the hole at Top Panel (A). Trap the bottom pin on Bottom Panel (B)
and gently slide the pin until it engaged the hole on panel (B).
Diagram3.
Diagram4.
B
D
E
C
A
x 6
RF10041
600-4X(Small)
Page 4 of 4
/
