Page 1 of 19
CSW-HD44014K
Pro AV/IT 4K 4x4 HDMI Matrix, 18Gbps (YUV:444), HDCP 2.2
Operation Manual
Page 2 of 19
Thank you for purchasing this product. For optimum performance and
safety, please read the instruction carefully before connecting, operating or
adjusting this product. Please keep the manual for future reference.
1. Introduction
The HDMI 4x4 matrix switcher features four HDMI inputs and four HDMI
outputs. It provides true matrix routing for HDMI signals. It supports the
transmission of video (resolutions up to 2160p@60Hz Ultra HD 4:4:4) and
supports high resolution digital audio formats such as LPCM 7.1CH, Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio. It works with
Blue-Ray players, Set-Top boxes, Home Theater PCs, and game consoles. Any
source is accessible at all times by any display by selecting it via the
supplied IR Remote Control, RS-232, TCP/IP or the selection buttons on the
front panel. This device also supports all HDMI 3D formats.
2. Features
➢ HDMI2.0, HDCP2.2/HDCP1.4 compliant
➢ Supports video format up to 4k2k@60Hz with 24bit RGB/YCbCr
4:4:4/YCbCr 4:2:2, and up to 4k2k@60Hz with 12bit YCBCR 4:2:0
➢ Supports color space conversions among RGB, YCbCr4:4:4, YCbCr4:2:2
and xvYCC video formats
➢ Supports all HDMI 3D formats up to 2160p@30
➢ Supports high resolution VESA mode video format up to QSXGA@60Hz
➢ Supports reception of any audio data conforming to the HDMI
specification such PCM at up to 192kHz, compressed audio (IEC 61937),
DSD, DST, DTS and HBR
➢ Supports simultaneous HDMI Coax and L/R audio outputs
➢ Supports smart EDID management
➢ Supports RS-232, remote control, on-panel control and TCP/IP Control
Page 3 of 19
3. Package Contents
➢ 1 x HDMI 4x4 Matrix Switcher
➢ 1 x 12V/2.5A Power Adapter
➢ 1 x Operation Manual
➢ 1 x Wideband IR Rx cable
➢ 1 x HDMI Matrix IR Remote
➢ 2 x Mounting ears(Matrix)
➢ 1 x RS-232 cable
4. Specifications
Video Bandwidth 594MHz [18Gbps]
Support Video Resolution 480i, 576i, 480p, 576p, 720p, 1080i,
1080p24/30/50/60,
2160p24/25/30/50/60;
Input Ports 4×HDMI, 1×IR Receiver, 1×RS-232,
1xRJ-45(Control)
Output Ports 4×HDMI, 4×Toslink, 4×L/R
HDMI connector Type A 19 pin female
RJ-45 connector WE/SS 8P8C
3.5mm connector IR Receiver
ESD Protection Human-body Model:
± 8kV (Air-gap discharge)
± 4kV (Contact discharge)
Power Supply 12V/2.5A DC (US/EU standards,
CE/FCC/UL certified)
Dimensions 440 mm (W)×200 mm (D)×45 mm (H)
Weight 1820 g
Chassis Material Metal
Silkscreen Color Black
Page 4 of 19
Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF
Storage Temperature −20 ºC~60 ºC/−4 ºF~140 ºF
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 30 W(max)/0.5w(Standby)
5. PANEL FUNCTIONS
5.1 Front Panel
1. LCM: Displays information of each input and output setting and EDID
management.
2. IR: IR Receiver window (accepts the remote-control signal of this device
only).
POWER: Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when in 'Standby' mode.
LOCK: Press this button to lock all the buttons on the panel. Press again
to unlock.
3. OUTPUT/INPUT: Press the OUTPUT and INPUT button to select the output
corresponding input.
For example: Press OUPUT ALL > INPUT 1, The OUTPUT A, B, C,
D will be set to INPUT 1.
Page 5 of 19
Press PTP button, The OUTPUT A, B, C, D will be
corresponding INPUT 1, 2, 3, 4.
4. EDID: Smart EDID management, the LCM will display the EDID operation.
Press the MENU button to enter the EDID management window. Press
UP/DOWN button to select the needed EDID setting. Press ENTER to
download EDID into input source. Easily download any EDID setting
to any input port.
Note: The EDID mode table as below
EDID Mode
EDID Description
1
1080p, 2CH AUDIO
2
1080p, DOLBY/DTS 5.1
3
1080p, HD AUDIO
4
1080i, 2CH AUDIO
5
1080i, DOLBY/DTS 5.1
6
1080i, HD AUDIO
7
3D,1080p, 2CH AUDIO
8
3D, 1080p, DOLBY/DTS 5.1
9
3D,1080p, HD AUDIO
10
4K30_444, 2CH AUDIO
11
4K30_444, DOLBY/DTS 5.1
12
4K30_444, HD AUDIO
13
4K60_420, 2CH AUDIO
14
4K60_420, DOLBY/DTS 5.1
15
4K60_420, HD AUDIO
16
4K60_444, 2CH AUDIO
17
4K60_444, DOLBY/DTS 5.1
18
4K60_444, HD AUDIO
19
Copy from HDMI OUTPUT A
20
Copy from HDMI OUTPUT B
21
Copy from HDMI OUTPUT C
22
Copy from HDMI OUTPUT D
EDID. What is it and what is it used for?
Under normal circumstances, a source device (digital and analog) will require
information from a connected device/display to know what resolutions and
features are available. The source can then cater its output to send only
resolutions and features that are compatible with the attached device/display.
This information is called EDID (Extended Display Information Data)
and a source device can only accept and read one EDID from a connected
device/display. Likewise, the source can only output one resolution to a
connected device/display.
Why is EDID so important with the HDMI Matrix?
The Matrix is a complex piece of technology that replicates and switches
between multiple inputs and outputs. Each connected source device will require
one EDID to read. EDID management is carefully handled by the HDMI Matrix to
provide a single EDID for each source to read.
What options do I have to manage the EDID in the HDMI Matrix?
First, it is important to note that each source device can only output one
video/audio signal type. This includes resolutions and timings. When multiple
devices/displays are used, such as with the HDMI Matrix, it is important to use
devices/displays that have similar or compatible resolutions/features. This will
ensure that the single video/audio signal produced by the source device is
accepted by all of the connected output devices/displays. The user has the
option, through the EDID management window, to choose how the unit will
manage the EDID from multiple HDMI devices/displays. Therefore, the user has
some control over the resolutions/features that the source devices will output.
The HDMI Matrix has multiple EDID management modes that will control how
the EDID information from multiple devices/displays are combined, ignored, and
routed.
Page 6 of 19
Page 7 of 19
5.2 Rear Panel
1. PC CONTROL
TCP/IP: This port is the link for TCP/IP control and connects to an active
Ethernet link by an RJ-45 cable.
RS232: Connect to a PC or control system by D-Sub 9-pin cable for the
transmission of RS-232 commands.
2. HDMI INPUT: Connect to an HDMI source device
3. AUDIO OUPUT: The coaxial and L/R audio output to audio amplifiers or
speakers.
4. HDMI OUTPUT: Connect to HDMI equipped TVs or monitors.
5. IR EXT: If the front IR sensor of unit is obstructed or the unit is installed in a
closed area out of infrared line of sight, the IR RX receiver included can be
inserted into the IR EXT port at the rear to extend the IR sensor range and
enable local control of the matrix.
6. DC POWER INPUT: Connect to 12V/2.5A DC power adapter.
Page 8 of 19
6. Remote Control
1. Press this button to power on the matrix or set to
standby mode.
2. Press these buttons to select output A, B, C, D for
input 1, 2, 3, 4 ports.
Page 9 of 19
7. PC Controller user guide
Installation
Matrix controller is green software. Just copy MatrixController.exe to PC which is
used to control the Matrix by RS232 COM port or TCP/IP to complete
installation.
Preparation
➢ Connect PC and Matrix by RS232 cable (headers of both sides of cable
should be FEMALE) or TCP/IP (local area network)
➢ Power-up the Matrix
➢ Double click MatirxController.exe icon to run the application
How to control Matrix
“General” page
Page 10 of 19
1. Select RS232 COM or TCP mode
2. Select RS232 COM port
3. Click to connect or disconnect PC with Matrix
4. Select Matrix IP
5. Connect to Matrix IP
6. Search Matrix IP
7. Configure Matrix IP and MAC
8. Click to reset to the factory settings
9. Reboot Matrix system
10. Device information display area
11. Click to refresh device status: include device information displayed in 10
areas and Input/output settings on “Matrix” page
12. Click to clear device information
13. Enable or disable Beep
14. Power on/off Matrix system
➢ Configure TCP
After action of 7, edit form will pop-up as below:
1. Select auto or static IP
2. Set the Matrix IP
3. Set the Matrix MAC
Page 11 of 19
“EDID control” page
The controller has 3 methods to set the EDID mode. Manual mode, Copy mode
and open EDID file mode.
1. Select the needed EDID to input port and click set button to download EDID
to the selected HDMI input port.
2. Copy the selected HDMI output EDID and click set button to download EDID
to the selected HDMI input port.
3. Open the user define EDID file and click set button to download EDID to the
selected HDMI input port.
4. Click the status button to refresh input EDID status.
Page 12 of 19
“Matrix” page
1. LED which display Input number for respective Output
2. Click to select Input port for respective Output port
3. Click to select previous or next Input port for respective Output port
4. Select ON/OFF to enable/disable ARC function
Page 13 of 19
“FW upgrade” page
1. Click to open FW file (file extension is “.fw”)
2. Display the FW file path
3. Display the progress of the software upgrade
4. Click to upgrade the Matrix software
5. Display the message of the software upgrade
Page 14 of 19
8. Basic Installation Diagram
1. Connect up to 4 sources such as a Blue-Ray Player, game console, A/V
Receiver, Cable or Satellite Receiver, etc. to each HDMI input port on the unit.
Do not hot plug! Insert and unplug cables carefully with the power switch
off. Connecting and disconnecting cables while the unit is powered can
result in damage to the circuitry.
2. Connect each HDMI output to high-definition displays such as a HDTV or
HD projector that has HDMI input. Note: High-speed HDMI cables are
recommended for the distances required for each connection.
3. Plug in IR receiver to the port of the IR EXT on rear unit if needed.
4. Plug in DC power adapter first, followed by each display device and source
device.
CSW-HD44014K
RS232 Commands
Genreral:
Factory Reset A5 5B 08 0A 00 00 00 00 00 00 00 00 EE
Reboot A5 5B 08 0D 00 00 00 00 00 00 00 00 EB
Status
A5 5B 01 04 01 00 00 00 00 00 00 00 FA //INPUT1 5V Status
A5 5B 01 05 01 00 00 00 00 00 00 00 F9 //OUTPUTA HPD Status
A5 5B 01 04 02 00 00 00 00 00 00 00 F9 //INPUT2 5V Status
A5 5B 01 05 02 00 00 00 00 00 00 00 F8 // OUTPUTB HPD Status
A5 5B 01 04 03 00 00 00 00 00 00 00 F8 //INPUT3 5V Status
A5 5B 01 05 03 00 00 00 00 00 00 00 F7 //OUTPUTC HPD Status
A5 5B 01 04 04 00 00 00 00 00 00 00 F7 //INPUT4 5V Status
A5 5B 01 05 04 00 00 00 00 00 00 00 F6 // OUTPUTD HPD Status
Enable Beep
Disable A5 5B 06 01 F0 00 00 00 00 00 00 00 09
Enable A5 5B 06 01 0F 00 DD 00 00 00 00 00 0D
Power On/Off
Off A5 5B 08 0B F0 00 F0 00 00 00 00 00 0D
On A5 5B 08 0B 0F 00 0F 00 00 00 00 00 CF
EDID:
Set EDID XXX Mode to IN1
1080P,Stereo Audio 2.0 A5 5B 03 02 01 F0 01 00 00 00 00 00 09
1080P,Dobly/DTS 5.1 A5 5B 03 02 02 F0 01 00 00 00 00 00 08
1080i,HD Audio 7.1 A5 5B 03 02 03 F0 01 00 00 00 00 00 07
1080i,Stereo Audio 2.0 A5 5B 03 02 04 F0 01 00 00 00 00 00 06
1080i,Dobly/DTS 5.1 A5 5B 03 02 05 F0 01 00 00 00 00 00 05
1080i,HD Audio 7.1 A5 5B 03 02 06 F0 01 00 00 00 00 00 04
3D,Stereo Audio 2.0 A5 5B 03 02 07 F0 01 00 00 00 00 00 03
3D,Dobly/DTS 5.1 A5 5B 03 02 08 F0 01 00 00 00 00 00 02
3D,HD Audio 7.1 A5 5B 03 02 09 F0 01 00 00 00 00 00 01
4K2K30,444,Stereo Audio 2.0 A5 5B 03 02 0A F0 01 00 00 00 00 00 00
4K2K30, 444, Dobly/DTS 5.1 A5 5B 03 02 0B F0 01 00 00 00 00 00 FF
4K2K30, 444, HD Audio 7.1 A5 5B 03 02 0C F0 01 00 00 00 00 00 FE
Baudrate:
115200
Data Width:
8 bit
Parity:
None
Stop:
1 bit
DHCP:
Enabled (default)
IP Port:
23
Page 15 of 19
4K2K60,420,Stereo Audio 2.0 A5 5B 03 02 0D F0 01 00 00 00 00 00 FD
4K2K60, 420,Dobly/DTS 5.1 A5 5B 03 02 0E F0 01 00 00 00 00 00 FC
4K2K60, 420,HD Audio 7.1 A5 5B 03 02 0F F0 01 00 00 00 00 00 FB
4K2K60, 444, Stereo Audio 2.0 A5 5B 03 02 10 F0 01 00 00 00 00 00 FA
4K2K60, 444, Dobly/DTS 5.1 A5 5B 03 02 11 F0 01 00 00 00 00 00 F9
4K2K60, 444, HD Audio 7.1 A5 5B 03 02 12 F0 01 00 00 00 00 00 F8
Set EDID XXX Mode to IN2
1080P,Stereo Audio 2.0 A5 5B 03 02 01 F0 02 00 00 00 00 00 08
1080P,Dobly/DTS 5.1 A5 5B 03 02 02 F0 02 00 00 00 00 00 07
1080i,HD Audio 7.1 A5 5B 03 02 03 F0 02 00 00 00 00 00 06
1080i,Stereo Audio 2.0 A5 5B 03 02 04 F0 02 00 00 00 00 00 05
1080i,Dobly/DTS 5.1 A5 5B 03 02 05 F0 02 00 00 00 00 00 04
1080i,HD Audio 7.1 A5 5B 03 02 06 F0 02 00 00 00 00 00 03
3D,Stereo Audio 2.0 A5 5B 03 02 07 F0 02 00 00 00 00 00 02
3D,Dobly/DTS 5.1 A5 5B 03 02 08 F0 02 00 00 00 00 00 01
3D,HD Audio 7.1 A5 5B 03 02 09 F0 02 00 00 00 00 00 00
4K2K30,444,Stereo Audio 2.0 A5 5B 03 02 0A F0 02 00 00 00 00 00 FF
4K2K30, 444, Dobly/DTS 5.1 A5 5B 03 02 0B F0 02 00 00 00 00 00 FE
4K2K30, 444, HD Audio 7.1 A5 5B 03 02 0C F0 02 00 00 00 00 00 FD
4K2K60,420,Stereo Audio 2.0 A5 5B 03 02 0D F0 02 00 00 00 00 00 FC
4K2K60, 420,Dobly/DTS 5.1 A5 5B 03 02 0E F0 02 00 00 00 00 00 FB
4K2K60, 420,HD Audio 7.1 A5 5B 03 02 0F F0 02 00 00 00 00 00 FA
4K2K60, 444, Stereo Audio 2.0 A5 5B 03 02 10 F0 02 00 00 00 00 00 F9
4K2K60, 444, Dobly/DTS 5.1 A5 5B 03 02 11 F0 02 00 00 00 00 00 F8
4K2K60, 444, HD Audio 7.1 A5 5B 03 02 12 F0 02 00 00 00 00 00 F7
Set EDID XXX Mode to IN2
Set EDID XXX Mode to IN3
Set EDID XXX Mode to ALL
1080P,Stereo Audio 2.0 A5 5B 03 01 01 F0 00 00 00 00 00 00 0B
1080P,Dobly/DTS 5.1 A5 5B 03 01 02 F0 00 00 00 00 00 00 0A
1080i,HD Audio 7.1 A5 5B 03 01 03 F0 00 00 00 00 00 00 09
1080i,Stereo Audio 2.0 A5 5B 03 01 04 F0 00 00 00 00 00 00 08
1080i,Dobly/DTS 5.1 A5 5B 03 01 05 F0 00 00 00 00 00 00 07
1080i,HD Audio 7.1 A5 5B 03 01 06 F0 00 00 00 00 00 00 06
3D,Stereo Audio 2.0 A5 5B 03 01 07 F0 00 00 00 00 00 00 05
3D,Dobly/DTS 5.1 A5 5B 03 01 08 F0 00 00 00 00 00 00 04
3D,HD Audio 7.1 A5 5B 03 01 09 F0 00 00 00 00 00 00 03
4K2K30,444,Stereo Audio 2.0 A5 5B 03 01 0A F0 00 00 00 00 00 00 02
4K2K30, 444, Dobly/DTS 5.1 A5 5B 03 01 0B F0 00 00 00 00 00 00 01
4K2K30, 444, HD Audio 7.1 A5 5B 03 01 0C F0 00 00 00 00 00 00 00
4K2K60,420,Stereo Audio 2.0 A5 5B 03 01 0D F0 00 00 00 00 00 00 FF
4K2K60, 420,Dobly/DTS 5.1 A5 5B 03 01 0E F0 00 00 00 00 00 00 FE
4K2K60, 420,HD Audio 7.1 A5 5B 03 01 0F F0 00 00 00 00 00 00 FD
4K2K60, 444, Stereo Audio 2.0 A5 5B 03 01 10 F0 00 00 00 00 00 00 FC
Page 16 of 19
4K2K60, 444, Dobly/DTS 5.1 A5 5B 03 01 11 F0 00 00 00 00 00 00 FB
4K2K60, 444, HD Audio 7.1 A5 5B 03 01 12 F0 00 00 00 00 00 00 FA
Copy EDID From xxx to IN1
HDMI OUT A A5 5B 03 04 01 00 01 00 00 00 00 00 F7
HDMI OUT B A5 5B 03 04 02 00 01 00 00 00 00 00 F6
HDMI OUT C A5 5B 03 04 03 00 01 00 00 00 00 00 F5
HDMI OUT D A5 5B 03 04 03 00 01 00 00 00 00 00 F5
Copy EDID From xxx to IN2
HDMI OUT A A5 5B 03 04 01 00 02 00 00 00 00 00 F6
HDMI OUT B A5 5B 03 04 02 00 02 00 00 00 00 00 F5
HDMI OUT C A5 5B 03 04 03 00 02 00 00 00 00 00 F4
HDMI OUT D A5 5B 03 04 04 00 02 00 00 00 00 00 F3
Copy EDID From xxx to IN3
HDMI OUT A A5 5B 03 04 01 00 03 00 00 00 00 00 F5
HDMI OUT B A5 5B 03 04 02 00 03 00 00 00 00 00 F4
HDMI OUT C A5 5B 03 04 03 00 03 00 00 00 00 00 F3
HDMI OUT D A5 5B 03 04 04 00 03 00 00 00 00 00 F2
Copy EDID From xxx to IN4
HDMI OUT A A5 5B 03 04 01 00 04 00 00 00 00 00 F4
HDMI OUT B A5 5B 03 04 02 00 04 00 00 00 00 00 F3
HDMI OUT C A5 5B 03 04 03 00 04 00 00 00 00 00 F2
HDMI OUT D A5 5B 03 04 04 00 04 00 00 00 00 00 F1
Copy EDID From xxx to ALL
HDMI OUT A A5 5B 03 03 01 00 00 00 00 00 00 00 F9
HDMI OUT B A5 5B 03 03 02 00 00 00 00 00 00 00 F8
HDMI OUT C A5 5B 03 03 03 00 00 00 00 00 00 00 F7
HDMI OUT D A5 5B 03 03 04 00 00 00 00 00 00 00 F6
Input EDID List
IN1 A5 5B 01 0C 01 00 00 00 00 00 00 00 F2
IN2 A5 5B 01 0C 02 00 00 00 00 00 00 00 F1
IN3 A5 5B 01 0C 03 00 00 00 00 00 00 00 F0
IN4 A5 5B 01 0C 04 00 00 00 00 00 00 00 EF
Matrix:
OUTPUT A
IN1 A5 5B 02 03 01 00 01 00 00 00 00 00 F9
IN2 A5 5B 02 03 02 00 01 00 00 00 00 00 F8
IN3 A5 5B 02 03 03 00 01 00 00 00 00 00 F7
IN4 A5 5B 02 03 04 00 01 00 00 00 00 00 F6
OUTPUT B
Page 17 of 19
IN1 A5 5B 02 03 01 00 02 00 00 00 00 00 F8
IN2 A5 5B 02 03 02 00 02 00 00 00 00 00 F7
IN3 A5 5B 02 03 03 00 02 00 00 00 00 00 F6
IN4 A5 5B 02 03 04 00 02 00 00 00 00 00 F5
OUTPUT C
IN1 A5 5B 02 03 01 00 03 00 00 00 00 00 F7
IN2 A5 5B 02 03 02 00 03 00 00 00 00 00 F6
IN3 A5 5B 02 03 03 00 03 00 00 00 00 00 F5
IN4 A5 5B 02 03 04 00 03 00 00 00 00 00 F4
OUTPUT D
IN1 A5 5B 02 03 01 00 04 00 00 00 00 00 F6
IN2 A5 5B 02 03 02 00 04 00 00 00 00 00 F5
IN3 A5 5B 02 03 03 00 04 00 00 00 00 00 F4
IN4 A5 5B 02 03 04 00 04 00 00 00 00 00 F3
Upgrade:
Device Type: A5 5B 01 01 00 00 00 00 00 00 CC 00 32
Output Count: A5 5B 01 02 00 00 00 00 00 00 CC 00 31
SW Version: A5 5B 01 03 00 00 00 00 00 00 CC 00 30
Upgrade: A5 5B 08 07 00 00 00 00 00 00 00 00 F1
A5 5B 08 08 00 00 00 00 00 00 00 00 F0
Page 18 of 19
/
