QUICK START GUIDE
Konftel
AV Grabber
KONFTEL AV GRABBER
The Konftel AV Grabber enables you to connect to
the Konftel CC200 via cable to use a computer as
presentation source, both for image and audio.
IMPORTANT NOTICE
Read all safety, installation, and user
documentation prior to installing or operating this
product.
To view and download safety, installation,
and user documentation go to konftel.com/support.
WHAT’S IN THE BOX
Konftel AV Grabber
2.5 m USB Cable
SETUP
HDMI
(not included)
USB
SETUP
Computer to be used as presentation source
CONNECTING
1. Connect the computer to be used as presen-
tation source to HDMI INPUT connector on
Konftel AV Grabber
2. Connect the Konftel AV Grabber to the Konftel
CC200 using the provided USB cable.
The computer will be used as video source for
content on the CC200.
Note: Not all the resolutions from the computer are
supported.
Once the AV Grabber is connected as described
in this guide, press the Present Button (
).
DURING A CALL
A menu on screen will show all the available options:
just select USB among them and the CC200 will
start sharing the content of the connected PC/Mac.
A01
P/N 700515379
900102158 Rev 1A
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
