Canon MultiPASSTM C50 User manual

Brand: Canon

Model: MultiPASSTM C50

Category: Multifunctionals

Type: User manual

This manual is also suitable for

Canon MultiPASS C50 Getting Started ENGLISH

MultiPASS

C50

GETTING STARTED

ENGLISH

I. Installation Guide

The following pages have been copied from the MultiPASS C50 User

Documentation to get you started. Please use these manuals for full

details.

Unpacking and Assembling the MultiPASS C50 ......................................... I-2

Connecting the MultiPASS C50 to your PC ................................................. I-6

Connecting the Telephone Line ..................................................................... I-6

Connecting the Power Cord ........................................................................... I-7

Installing the BJ Cartridge .............................................................................. I-7

Loading Print Media for Automatic Feed .................................................... I-8

Loading Print Media for Manual Feed ......................................................... I-9

Entering Your Identiﬁcation Information .................................................. I-10

Installing the Desktop Manager Software .................................................. I-11

Setting Up C50 Options in the Desktop Manager .................................... I-12

ZZK-HM50A610-V1.0

f Canon Europa N.V. 1998

Printed in The Netherlands

8375AX4

F ACSIMILES

Canon MultiPASS C50 Getting Started ENGLISH

I-2

Unpacking Your MultiPASS C50 (2-5)

Follow the directions below to unpack your MultiPASS C50 properly, and to

make sure you have all of its components and documentation.

1. Carefully remove all items from the box. You should have someone help by

holding the box while you lift the MultiPASS C50 and its protective

packaging out of the carton.

TELEPHONE LINE

POWER CORD

BC-20 BLACK BJ

CARTRIDGE

DOCUMENT

SUPPORT FOR

SCANNED

DOCUMENTS

OUTPUT TRAY

EXTENSION

SENDING

DOCUMENT

SUPPORT

MultiPASS C50 UNIT

PARALLEL CABLE

FERRITE CORE

MultiPASS C50 USER’S GUIDE

MULTIPASS DESKTOP MANAGER FOR

WINDOWSH PACKAGE

BC-21/21e COLOUR BJ CARTRIDGE

SB-21 BJ CARTRIDGE CONTAINER

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-3

Removing Shipping Materials (2-8)

1. Remove all pieces of shipping tape from the outside of the MultiPASS C50.

2. Remove the shipping tape and protective cardboard from the sheet feeder.

3. Open the operation panel by grasping it with both hands and gently pulling it

toward you.

4. Remove the soft styrofoam sheet from the unit’s Automatic Document

Feeder (ADF), then gently push the operation panel shut until it clicks.

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-4

Attaching the Sending Document Support (2-11)

To install this support, insert one of its tabs into the corresponding slot above the

MultiPASS C50’s Automatic Document Feeder (ADF), then – ﬁrmly but gently –

insert the other.

Attaching the Document Support (2-12)

The ends of the metal support ﬁt into the slots on the front of the MultiPASS

C50, as shown below. To install it, slightly squeeze the ends of the support toward

each other, insert them in the slots, and gently release them. Then slide the

support into the unit until it clicks in position.

When the support is installed, you can pull it out or push it in to suit the size of

the document.

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-5

Attaching the Output Tray Extension (2-13)

The ends of the metal support ﬁt into the slots on the output tray, as shown

below. To install it, squeeze the ends of the support toward each other, insert

them into the slots, and gently release them.

Attaching the Local Language Labels

1 2 3

4 5 6

PRINTER

RESET

TONE/+ D.T. R

CARTRIDGE

FUNCTION RESUME

/PAUSE RECEIVE MODE RESOLUTION

ALARM

CODED DIAL

Fit the faceplate in the right

position.

Peel the protective sheet from

the self-adhesive label,

carefully align it, and attach it

in the right position.

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-6

Connecting the MultiPASS C50 to Your PC (2-14)

1. Make sure the computer is turned off and the MultiPASS C50 is unplugged.

2. Connect the parallel cable to your MultiPASS C50:

3. Open the ferrite core and attach it to the parallel cable near the end closest to

the MultiPASS C50 unit.

4. Connect the other end of the cable to the parallel interface port on your

computer.

Connecting the Telephone Line (2-16)

1. Connect one end of the supplied telephone line to the jack marked on the

side of the MultiPASS C50.

2. Connect the other end of the line to your wall telephone jack.

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-7

Connecting the Power Cord (2-18)

1. Plug the supplied power cord into the power receptacle on the MultiPASS

C50.

2. Plug the other end of the power cord into the outlet.

Installing the BJ Cartridge (2-31)

1. Make sure the MultiPASS C50 is plugged in.

2. Press CARTRIDGE.

CARTRIDGE

J The cartridge holder moves toward the centre of the unit.

3. Open the printer cover by grasping the document guides and lifting.

4. Raise the green cartridge lock lever (on the cartridge holder) by gently

pulling up on it.

DO NOT TOUCH THE

GUIDE RAIL

DO NOT TOUCH THE

RIBBON CABLE

DO NOT TOUCH THE

ROUND SHAFT

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-8

5. Peel the protective foil off the new BJ cartridge’s protective packaging, and

remove the cartridge.

6. Lift the orange cap off the cartridge’s print head, then remove the orange

tape.

7. Hold the cartridge so the label faces outward, tilt it slightly forward and to

the right, then slide it into the cartridge holder.

8. Lower the green lock lever completely. The BJ cartridge is now locked into

position.

9. Set the paper thickness lever. For printing on plain paper:

Cartridge Thickness Lever Position

BC-21/21e Colour BJ Cartridge (black) centre

BC-21/21e Colour BJ Cartridge (colour) centre

BC-20 Black BJ Cartridge left

10. Close the printer cover.

11. Press CARTRIDGE.

CARTRIDGE

Loading Print Media for Automatic Feed (2-45)

1. Pull the paper rest up until it stops.

2. Pick up a stack of sheets and fan the edge that will feed into the MultiPASS

C50 ﬁrst, then tap the stack on a ﬂat surface to even its edges.

3. Insert the stack into the sheet feeder until its stops, so that the right edge of

the stack is aligned with the right side of the sheet feeder.

4. Slide the paper guide snugly against the sides of the stack. You are now ready

to print.

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-9

Loading Print Media for Manual Feed (2-49)

You will need to select manual feed from the print dialog box of your Windows

application before printing. (See the MultiPASS Desktop Manager User’s Guide

for instructions.) Load the sheet when the dialog box prompts you to do so. If

you attempt to load the sheet without selecting manual feed, the sheet will be

ejected.

1. Hold the sheet with its print side facing upward, and align the sheet with the

left edge of the manual feeder (located at the back of the unit).

2. Insert the sheet until it stops, and continue to hold the sheet until the

MultiPASS C50 ”grabs” the sheet and pulls it in to the proper position.

3. After the sheet is loaded, open the printer cover and make sure the sheet is

set straight. If necessary, pull the sheet out and load it again.

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-10

Entering Your Identiﬁcation Information (2-58)

When the C50 is connected to your PC, we recommend that you use the Setup

Options dialog box in the Desktop Manager for Windows. Do not make your

changes via the operation panel of the C50. C50 data is overwritten by the

Desktop Manager for Windows software.

1. Press FUNCTION.

FUNCTION

2. Use or to select USER SETTINGS, then press START/COPY.

1 2

DATE & TIME

3. Press START/COPY once more.

J The currently set date and time appear.

4. Use the numeric buttons to type in the correct date and time.

5. Press START/COPY to save the date and time.

UNIT TELEPHONE #

6. Press START/COPY again and enter your fax/telephone number using the

numeric buttons.

7. Press START/COPY to save the fax/telephone number.

UNIT NAME

8. Press START/COPY again, then use the numeric buttons to enter your name

or your business name.

9. Press START/COPY to save the name, then press or to select TEL LINE

TYPE.

10. Press START/COPY , then use or to select the correct telephone line

type.

11. Press START/COPY to save the telephone line type.

12. Press STOP to return to standby mode.

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

I-11

Installing the Desktop Manager

Software

If you are attempting to reinstall the Desktop Manager software, you must ﬁrst

uninstall your current installation of the software. For instructions on uninstalling

the software, refer to Chapter 8, ”C50 Setup and Other Utilities in the Desktop

Manager.”

Installing in Windows 95/98 (2-4)

This section provides instructions for installing the C50 printer driver and

Desktop Manager in Windows 95/98. The system connects the printer driver to

the appropriate printer port during installation (for example, LPT1 or LPT2).

You can later change the connection if necessary.

To install the Desktop Manager:

1. Insert the installation disk into your disk drive.

2. Follow the on-screen installation instructions.

The numbers in parentheses indicate the pages in the MultiPASS Desktop Manager for Windows User’s Guide on

which you can ﬁnd detailed information.

Canon MultiPASS C50 Getting Started ENGLISH

I-12

Setting Up C50 Options in the Desktop

Manager (8-2)

Since you can make changes to most option settings either on the C50 or in the

Desktop Manager, be aware of the following:

J Any option setting you make on the C50 does not display in the Desktop

Manager Setup Options dialog box.

J Any change you make to an option in the Desktop Manager overrides the

corresponding setting you may have made on the C50 device itself.

Therefore, before you make changes to these option settings, decide where you

prefer to make your changes – on the C50 or in the Desktop Manager.

Establishing a preference for changes will help you avoid inadvertently

overriding your previous settings. For example, you add speed dial assignments

on the C50. These speed dial settings are not reﬂected in the Desktop Manager

Setup. Later, you make speed dial assignments in the Desktop Manager. The

speed dial assignments made in the Desktop Manager override your speed dial

assignments in the C50.

To change setup options in the Desktop Manager:

1. On the Setup menu, click the group of setup options you want to change.

2. In the Setup Options dialog box, to display another group of options, click

the appropriate tab.

3. On the appropriate setup tab, specify your changes.

4. To save any changes and close the dialog box, click OK. When prompted,

choose whether or not you want to overwrite the settings on your C50.

To exit the dialog box without saving your changes, click Cancel.

When you save your changes, C50 setup options are saved in the Desktop

Manager, as well as on the C50.

The numbers in parentheses indicate the pages in the MultiPASS Desktop Manager for Windows User’s Guide on

which you can ﬁnd detailed information.

Canon MultiPASS C50 Getting Started ENGLISH

I-13

Notes

Canon MultiPASS C50 Getting Started ENGLISH

I-14

Notes

Canon MultiPASS C50 Getting Started ENGLISH

I-15

Notes

Canon MultiPASS C50 Getting Started ENGLISH

I-16

Notes

Canon MultiPASS C50 Getting Started ENGLISH

I-17

Notes

Canon MultiPASS C50 Getting Started ENGLISH

II-1

MultiPASS

C50

GETTING STARTED

ENGLISH

II. Quick Reference Guide

The following pages have been copied from the MultiPASS C50 User

Documentation to get you started. Please use these manuals for full

details.

The Operation Panel ...................................................................................... II-2

Sending Documents

Memory Sending ............................................................................ II-5

Manual Sending via the Handset ................................................. II-5

Dialling Methods ............................................................................ II-5

Using One-Touch Speed Dialling ................................................. II-6

Using Coded Speed Dialling ......................................................... II-6

Using Group Dialling .................................................................... II-6

Different Ways to Receive a Fax .................................................................. II-7

Setting the Receive Mode ............................................................. II-7

Making Copies ................................................................................................ II-8

Selecting Automatic/Manual Document Feed ........................................... II-8

Storing Numbers for One-Touch Speed Dialling ....................................... II-9

Storing Numbers for Coded Speed Dialling ............................................. II-10

Creating Groups for Group Dialling ......................................................... II-11

Sending a Fax from Your Computer (PC Faxing) .................................... II-13

Receiving a Fax ............................................................................................. II-14

Printing a Document .................................................................................... II-15

Scanning with the Desktop Manager ......................................................... II-16

Scanning from a Windows Application ..................................................... II-17

Setting Up Speed Dial Assignments .......................................................... II-18

Using MultiPASS Diagnostics .................................................................... II-19

Jams in the Automatic Document Feeder ................................................. II-20

Jams in the Sheet Feeder ............................................................................. II-20

Error Codes, Messages and Solutions ....................................................... II-21

ZZK-HM50A610-V1.0

f Canon Europa N.V. 1998

Printed in The Netherlands

8375AX4

F ACSIMILES

Canon MultiPASS C50 Getting Started ENGLISH

II-2

Getting Acquainted with Your MultiPASS C50

Paper Rest

Paper Guide

Sheet Feeder

Printer Cover

Operation Panel

Output Tray

Paper Output Guides

Sending Document Support

Automatic Document Feeder

(ADF)

Document Guides

Document Support For Scanned

Documents

Output Tray Extension

The Operation Panel (2-23)

1 2

ABC

DEF

4 5

JKLGHI

MNO

7 8

TUVPQRS

WXYZ

/PAUSE RECEIVE MODE RESOLUTION

ALARM

CODED DIAL

1 2 3

4 5 6

PRINTER

RESET

TONE/+ D.T. R

CARTRIDGEFUNCTION RESUME

A Document Feed Lever

B Receive Mode

C LCD Display

D Resolution

E One-Touch Speed Dial/

Special Function Buttons

F Numeric Buttons

G Redial/Pause

H Coded Dial

I Start/Copy

J Alarm

K Stop

The numbers in parentheses indicate the pages in the MultiPASS C50 User’s Guide on which you can ﬁnd detailed

information.

Canon MultiPASS C50 Getting Started ENGLISH

II-3

A Document feed lever

Set this lever to the left (

) for automatic document feed, or to the right ( )

for manual document feed.

B RECEIVE MODE button

Use this button to select whether the MultiPASS C50 is set to receive faxes

manually (”MANUAL MODE”), to treat all calls as faxes (”FAX ONLY

MODE”), to use an answering machine to receive all calls (”ANS.

MACHINE MODE”), or to automatically switch between telephone and fax

receiving, depending on the type of call (”Fax/Tel Mode”).

C LCD display

This displays messages and prompts during operation, and displays selections,

text, numbers, and names when registering information.

D RESOLUTION button

Press this button to select the resolution the MultiPASS C50 will use for the

document you want to fax, copy, or scan.

E One-Touch Speed Dial/Special Function buttons

Use these buttons for one-touch speed dialling, entering user information, and

to perform special operations. See pages 2-25 and 2-26 for details on the

special function buttons.

F Numeric buttons

Use these buttons to type numbers and names when entering information, and

to dial fax/telephone numbers that are not registered for automatic dialling.

(REDIAL)/PAUSE button

Press this button to redial the last number that was dialled using the number

buttons, or to enter pauses between digits when dialling fax numbers.

H CODED DIAL button

Press this button (followed by entering a two-digit code with the numeric

buttons) to dial a fax number that you have registered for coded speed

dialling.

(START/COPY) button

Press this button to begin sending, receiving, scanning, or other operations, or

to select functions when registering information.

J ALARM lamp

This lamp ﬂashes when an error occurs, when the MultiPASS C50 is out of

paper or ink.

(STOP) button

Press this button to cancel sending, receiving, or any other operation.

Page is loading ...

Canon MultiPASSTM C50 User manual

Brand: Canon

Model: MultiPASSTM C50

Category: Multifunctionals

Type: User manual

This manual is also suitable for

Download PDF

report

Canon MultiPASSTM C50 User manual

This manual is also suitable for

Canon MultiPASSTM C50 User manual

Related papers

Other documents