AEG Voxtel C50 Quick start guide

Brand: AEG

Model: Voxtel C50

Type: Quick start guide

AEG Voxtel C50 is an easy-to-use corded telephone with essential features for comfortable everyday use. This landline phone has a clear display, a user-friendly interface, and a range of practical functions that make it a great choice for homes and small offices. The Voxtel C50 has a last number redial button, a recall/flash button, a mute button, and a wall-mount option. The Voxtel C50 is also compatible with PBX systems, making it a versatile choice for businesses.

CORDED

TELEPHONE

Voxtel C50

QUICK START GUIDE

1 BECAUSE WE CARE

Thank you for purchasing this product. This product has been designed and assembled with utmost

care for you and the environment. This is why we supply this product with a quick installation guide to

reduce the number of paper (pages) and therefor save trees to be cut for making this paper. Thank you

for supporting us to protect our environment.

2 UNPACKING YOUR PHONE

In the box you will ﬁnd:

•Base Unit

•Handset

•Coiled Handset cord

•Telephone line cord for base unit

•User manual

Keep the packing materials in a safe place in case you later need to transport the unit.

3 INTENDED USE

This telephones is intended to be connected to a public analogue telephone network or to an

analogue extension of an approved compatible PBX system.

4 GETTING TO KNOW YOUR PHONE

(See P1)

# Meaning

Last number redial button

Press this to make a repeat call to the last number dialled

Recall/ﬂash button

You may need this if you are using your C50 on a PBX.

Mute button

Press and hold down this button to mute the mouth-piece(during a call so the

person on the other end can‘t hear you).

4 Handset cord socket on the handset

5 Telephone Line input socket

5 INSTALLATION

1. Locating the base unit (See P2)

The base unit should be placed on a level surface, in a position where:

•the telephone line cable will reach your telephone line socket or extension socket.

•it is not close to a sink, bath or shower, or anywhere else where it might get wet.

•it is not close to other electrical equipment - fridges, washing machines, microwave ovens, TVs,

ﬂuorescent lights, etc.

2. Plug the coiled handset cord into the handset

3. Place the handset on the base unit.

4. Plug the telephone line cord into the phone line socket of the base unit

and the other end

into your telephone line socket.

5. Lift the handset and check for dial tone in the earpiece.=

6 WALL MOUNT INSTALLATION

Please read the instructions on this template carefully before you start to wall mount your telephone.

I f you prefer, you can stand your telephone on a level surface.

Be careful - check that there are no electrical wires hidden in the wall.

1. Use this template for wallmounting, marking the wall at the ﬁxing centers. The marks should be

102mm apart.

2. Using screws(not supply with the unit) screw in at the two marked locations, leaving appox.

7mm(“1/4) between the wall and underside of screw head.

3. Tuck the telephone line cord into the grooves on the cradle. Make sure that the parking hook lever

is pushed to the top position.

4. Hang the cradle unit on the screws using the wallmounting slots on the underside of the unit.

You may need to remove the telephone from the wall and tighten the screws so that the cradle is

securely ﬁxed and does not wobble.

5. Rest the handset on the cradle using the parking hook on the cradle and the parking recess under

the earpiece on the handset.

102mm

Reset the hook on the cradle.

This hook is designed to keep the handset in place when the telephone is vertical on the wall. The

hook on the upper part of the cradle is there to support the handset if you need to leave the phone

temporarily during a call.

7 TELEPHONE OPERATIONS

7.1 To make a call

•Lift the handset and wait for Dial tone.

•Dial the telephone number using the keypad.

7.2 Last Number Redial

To make a repeat call to the last number you dialled (up to 32 digits)

•Lift the handset and wait for Dial tone.

•Press .

7.3 Mute

While you are on a call, to mute the mouthpiece so that your voice cannot be heared.

•Press and hold .

7.4 Use on a PBX

>If you are using your C50 on a PBX, and the PBX User Guide tells you to press RECALL, press the

button on your C50.

8 TROUBLESHOOTING

IMPORTANT:

The C50 must be serviced by trained engineers. NEVER attempt any repairs or adjustments yourself -

you could invalidate the Guarantee.

If you cannot make Calls...

Make sure your C50 is fully plugged into the telephone line socket.

Disconnect all other instruments connected to the same line as the C50 and see whether you can

make a call.

Disconnect the C50 from the telephone line and plug a different phone into the socket. Try making a

call. If this works, the line is OK.

If you are using a two-way socket adapter, remove it and plug a telephone directly into the socket, if

the call now works, the adapter may be faulty.

If you think the fault may be on the exchange line contact the service provider.

9 GUARANTEE AND SERVICE

The unit is guaranteed for 24 months from the date of purchase shown on your sales receipt. This

guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect,

faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or

repair other than through approved agents.

Please keep your sales (till) receipt this is your proof of guarantee.

9.1 While the unit is under Guarantee

•Disconnect the base unit from the telephone line and the mains electricity supply.

•Pack up all parts of your unit, using the original package.

•Return the unit to the shop where you bought it, making sure you take your sales receipt.

•Remember to include the mains adapter.

9.2 After the Guarantee has expired

If the unit is no longer under Guarantee, contact us via www.aegtelephones.eu

10 TECHNICAL DETAILS

Model Voxtel C50

Temperature range Operating 0 ºC to 40 ºC

Storage -20 ºC to 60 ºC

PBX compatibility Timed break recall: 100 ms.

Signalling type: DTMF (dual-tone multifrequency).

11 CE DECLARATION

This product is in compliance with the essential requirements and other relevant provisions of the

R&TTE directive 1999/5/EC.

The declaration of conformity can be found on: www.aegtelephones.eu

12 DISPOSAL OF THE DEVICE (ENVIRONMENT)

At the end of the product lifecycle, you should not throw this product into the normal household

garbage but bring the product to a collection point for the recycling of electrical and electronic

equipments. The symbol on the product, user guide and/or box indicate this. Some of the product

materials can be re-used if you bring them to a recycling point. By reusing some parts or raw materials

from used products you make an important contribution to the protection of the environment. Please

contact your local authorities in case you need more information on the collection points in your area.

Batteries must be removed before disposing of the device. Dispose of the batteries in an

environmental manner according to your country regulations.

13 CLEANING AND CARE

Do not clean any part of your phone system with benzene, thinners or other solvent chemicals as this

may cause permanent damage which is not covered by the Guarantee.

When necessary, clean it with a damp cloth.

Keep your phone system away from hot, humid conditions or strong sunlight, and don‘t let it get

wet.

Subject to avaibility. Rights of modification reserved.

AEG is a registered trademark used under license from AB Electrolux (publ)

www.aegtelephones.eu

AEG Voxtel C50 Quick start guide

AEG Voxtel C50 Quick start guide

AEG Voxtel C50 Quick start guide

Related papers

Other documents