20
A) Both power and steam indicator
lights are flashing:
• Checkthattheselectordialisturned
to
.
• Ifsteam/hotwaterhasbeenusedfor
too long, make a pause for 30 seconds.
• Switchthemachineofor5minutes
and restart it. If the lights are still flash-
ing, contact customer support.
B) The espresso temperature is too low:
• Carryoutthebrewingprocedurewith-
out using espresso grounds, but using
the filter and filter holder, in order to
preheat the system.
• Preheatthecups.
• Decalcifytheappliance.
C) The flow speed decreases notice-
ably:
• Donotpresstheespressogroundstoo
firmly into the filter.
• Donotgrindtheespressogroundstoo
nely(“medium”neness).
• Decalcifytheappliance.
D) The espresso is flowing out of the
side of the filter holder:
• Ensurethatthelterholderhasbeen
placed correctly.
• Twistthelterholderalittlemore
firmly into the retainer.
• Cleananyespressogroundsaway
from the rim of the filter holder.
E) No espresso is coming out:
• Ifthereisaloudnoisefromthema-
chine, this means air is in the system.
Let hot water flow through the nozzle
until there is a steady flow. Then try
brewing coffee again.
• Ensurethatthewatertankhasbeen
filled and is correctly in place. Activate
hot water. Then, try brewing coffee
again.
• Ensurethatthelterholderhasbeen
placed correctly.
• Ensurethattheselectordialhasbeen
turned right to the position.
• Donotpresstheespressogroundstoo
firmly into the filter.
• Cleanthebrewlter.
• Decalcifytheappliance.
F) The crema is no longer being pro-
duced as it should:
• Ensurethatthereareenoughespresso
grounds in the filter.
• Presstheespressogroundslightly.
• Cleanthelter.
G) Too little milk froth is created when
steaming milk:
• Alwaysusecool,fresh,low-fatmilk.
• Cleanthesteamnozzle.
H) The flow increases:
• Theespressogroundshavebeen
ground too rough.
• Ensurethatthereareenoughespresso
grounds in the filter.
I) The coffee machine switches itself
off while operating:
• Theappliancepumpisequippedwith
a temperature fuse that protects it
from overheating. The temperature
fuse interrupts the machine’s opera-
tion, if the machine is operated for
too long or if the pump is run without
water.
• Settheselectordialto“0”andremove
the plug from the mains socket.
• Leavethemachinetocoolforatleast
20 minutes. Fill up with water.
• Plugtheapplianceintothemains
again and switch it on. If the appliance
still does not work, please contact our
Customer Care Department.
GB
Troubleshooting
Disposal
Packaging materials
The packaging materials are environ-
mentally friendly and can be recycled.
The plastic components are identified
by markings, e.g. >PE<, >PS<, etc.
Please dispose of the packaging mate-
rials in the appropriate container at the
community waste disposal facilities.
Disposal
Old appliance
The symbol
on the product or on
its packaging indicates that this prod-
uct may not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for
the recycling of electrical and elec-
tronic equipment. By ensuring this
product is disposed of correctly, you
will help prevent potential negative
consequences for the environment
and human health, which could other-
wise be caused by inappropriate waste
handling of this product. For more
detailed information about recycling
of this product, please contact your
local city office, your household waste
disposal service or the shop where you
purchased the product.