Pure Clean Smart Robot Vacuum User manual

Smart Robot Vacuum

Automatic Floor Cleaner with Sweep,

Dust and Vacuum Ability

PUCRC90EU - PUCRC90UK

www.PyleUSA.com

TABLE OF CONTENTS

SAFETY INSTRUCTIONS

PRODUCT PARTS

Main Body and Accessories

Robot Anatomy

Charging Dock and Remote Control

Display Panel

Remote Control Operating

PRODUCT OPERATING

How to Get Started

Starting up/Pause/Sleeping

Scheduling

Cleaning Mode

PRODUCT MAINTAINING

Cleaning Side Brushes

Cleaning Dust Bin and Filters

Cleaning Sensors

TROUBLESHOOTING

Error Code Sheet

PRODUCT SPECIFICATIONS

1

2

3

4

5

6

7

8

9

10

11

12

www.PyleUSA.com

1

SAFETY INSTRUCTIONS

Before using this product, please read the following safety instructions and

follow all normal safety precautions.

• Before using this product, ensure the power switch is ON.

• Turn o the power switch on the right side of the main body when you don't

need to use this product for a long time.

WARNING

1. Only the certied technician may disassemble the product.

Users are not allowed to disassemble or repair the product.

2. Only use the adapter provided by the factory. Using other unmatched adapter

may cause electric shock, ﬁre or product damage.

3. Do not touch the power cord, plug or adapter when your hands are wet.

4. Do not make clothes or part of a body drawn into the product’s wheels.

5. Do not make this product close to cigarette, lighter, match or any ﬂammables.

6. If the product requires cleaning, clean it after being fully charged.

7. Do not over-bend the power cord or pressure the power cord with heavy or

sharp objects.

8. Indoor use only, do not use outdoors.

9. Do not sit on top of this product or attach an object on top of it.

10. Do not use this product in wet or moist environment (any environment with

liquid)

11. Before use, collect the ﬂoor environment (remove all the fragile objects and

cords, clothings papers and drapes .etc that may get caught in the product).

12. Do not place this product where it is easy to drop o (tables, chairs, etc).

13. Turn o the power switch when you don’t need to use this product for a long

time.

14. Before use, check whether adapter and outlet are properly connected.

15. To avoid tipping, inform all the people in the house when this product is

working.

16. The product may not be able to pass through steps over 10mm.

17. Use this product in temperature from -10°C to 40°C. Do not place this

product on a high-temperature environment.

18. The battery must be removed from the product before it is scrapped.

19. The product must be disconnected from the supply mains when removing

the battery.

20. Dispose of batteries safely

NOTE: This product could not be used by children, mentally challenged people

or people lack of related experience and knowledge (unless there’s people

instruct or supervise them).

www.PyleUSA.com

2

Product Parts

Main Body and Accessories

NO. DESCRIPTION Q'TY

1 Main Body 1

2 Charging Dock 1

3 Remote Control (battery not included) 1

4 Adapter 1

5 Cleaning Tool 1

6 User Manual 1

7 Extra Side Brushes 2

8 Extra HEPA Filter 1

www.PyleUSA.com

3

Product Parts

Robot Anatomy

Auto Charging Pin

Left Side Brush

Battery Cover

Left Wheel

Nose Wheel

Right Side Brush

Suck Passage

Right Wheel

Bottom Cover

Middle Cover

Dust Bin / Water Tank

Power Switch

Primary Filter

Dust Bin

HEPA Filter

HEPA Filter Frame

Display Panel

Bumper

Main Pad

Middle Pad

www.PyleUSA.com

4

Product Parts

Charging Dock

Remote Control

Signal Light

Charge Connecting Points

Power Supply Socket

Charge Connecting Points

Home

Clean

Plan

Directional Buttons

Edge

Spot

www.PyleUSA.com

5

Product Parts

Display Panel

When the robot is working or under operation, display panel will show the

current status as below:

When the display panel ﬂashes like this, it means the robot

is in selected mode, other opeation can be performed.

Means robot is in edge cleaning mode

Means robot is in auto cleaning mode

Means robot is in spot cleaning mode

Means robot is in charging dock, it’s searching for the

charging dock.

Means the battery is low, robot needs to be charged

immediately.

Means robot is fully charged.

Means robot is undercharging

Means robot is under the control of the remote control

directional buttons.

www.PyleUSA.com

6

1. “ ” Scheduling Button:

A. In selected mode, press to enter scheduling mode.

B. In scheduling mode, press to switch between hour and minute.

2. Clean Butoon:

A. In selected mode, press to start working.

B. In Scheduling mode, press to conﬁrm scheduling.

C. When robot is working, press to pause.

D. Press to switch from sleeping mode to select mode.

3. “ ” Directional Buttons

A. “ ” Forward Button:

In scheduling mode, press to move time forward

In Selected mode, press to drive robot forward.

B. “ ” Backward Button:

In scheduling mode, press to move time backward;

In Selected mode, press to drive robot backward.

C. “ ” Left Button:

In scheduling mode, press to switch from minute to hour;

Press to drive robot to the left.

D. “ ” Right Button:

In scheduling mode, press to switch from hour to minute;

Press to drive robot to the right.

4. “ ” Edge Button

Press to drive the robot in edge mode.

5. “ ” Spot Button

Press to drive robot in spot mode.

6. “ ” Home Button

Press to make the robot return to charging dock for charging.

Product Parts

Remote Control

NOTE:

1. Install two AAA type batteries into the remote.

2. If the remote control is not being used for a long time, it is better to take

out the batteries.

www.PyleUSA.com

7

Product Operating

1. HOW TO GET STARTED

1. Place in charging dock, plug in adapter,

signal light on charging dock will ash.

NOTE: Put charging dock against the wall and remove

obstacles about 1 meter at both sides and about 2 meters forward.

2. Turn on the Power Switch around the power socket, then display

panel will ash.

(If no command received, the robot will activate sleep mode after 15 sec.)

NOTE:

A. Please always keep the power switch on.

B. If power switch is turned o, all the scheduling will be lost.

CAUTION: Before charging the robot, please make sure the power switch is

turned ON or else the robot cannot be charged.

3. Charge the robot in either way as shown below:

A. Plug into an outlet.

B. Press HOME to make the robot return to charging dock to charge itself.

For better extending battery life:

A. Before ﬁrst use, charge the robot overnight. When fully charged, display panel

will turn solid .

B. In normal use, always store the robot on charging dock with base plugged in.

C. If the robot will not be used for a long time, turn the power switch o, fully

charge the robot and store it in a cool dry place.

4. Auto Charging

The robot will automatically return to charging dock when battery is low.

1M

2M

1

www.PyleUSA.com

8

2. STARTING UP/PAUSE/SLEEPING

Sleeping mode:

Robot is not working, no display on display panel and power switch is on;

Selected mode: Robot is not working, “88:88” on display panel is ashing;

Cleaning mode: Robot is working, display panel will show dierent status.

1. Starting up

A. Make sure the power switch is on

B. Press CLEAN button on main body or on remote control to start

cleaning.

NOTE: If robot is in sleeping mode, press CLEAN button to wake the robot up

from sleeping mode. Then press CLEAN for a second time, the robot will start

cleaning automatically.

2. Pause

To exchange robot from cleaning mode to selected mode:

A. Press either button on display panel;

B. Press CLEAN on remote control.

NOTE: When robot is paused, press CLEAN to make the robot to re-start cleaning.

3. Sleeping

To turn the robot into sleeping mode from selected mode:

A. Robot will automatically enter sleeping mode if no command received after 15

seconds.

B. Keep pressing CLEAN on main body for 3 seconds.

3. SCHEDULING

You can schedule to let the robot starts cleaning from a certain time. For

example, if you set 6:30, robot will start to clean after 6 hours and 30 minutes

from now on, and will clean everyday at this time. All the scheduling will be

automatically cancelled if the power switch turns o.

Scheduling on Remote:

1. Power on the robot and point the remote towards the robot.

2. Press PLAN and then use directional buttons to set the schedule.

3. Press CLEAN to save the setting. To cancel, make the number to “00:00”.

www.PyleUSA.com

9

Product Operating

Scheduling on Display Panel:

1. Turn ON power switch and press PLAN to enter scheduling mode.

2. In scheduling mode, press PLAN to exchange hour and minute, press HOME

to increase number and press SPOT to decrease number.

3. Press CLEAN to conﬁrm the setting. To cancel, long press PLAN for 5 seconds

and then press CLEAN to conrm cancelling.

* When you set the clock time or schedule, all your operation will be conrmed

by tone from robot; If no tone received, your setting is unsuccessful.

4. CLEANING MODE

1. Auto Cleaning

The robot will clean the room automatically and adjust its cleaning according

to the situation.

NOTE:

Press CLEAN button on robot or on remote control to start auto cleaning.

2. Spot Cleaning

Put the robot near a dirty area and press SPOT on remote control to start spot

cleaning.

NOTE:

Spot cleaning will automatically stop after the area is cleaned and then the robot

will turn to selected mode.

3. Edge Cleaning

Put the robot near the edge (wall) and press EDGE on remote control to start

edge cleaning.

NOTE:

Edge cleaning will automatically stop when robot could not detect any edges, or

you could manually press CLEAN to stop edge cleaning.

www.PyleUSA.com

10

1. Cleaning Side Brushes

Clean the side brushes when it gets dirty and replace if it’s damaged.

NOTE:

Before replacing side brushes, check and match "L” “R” mark on both side brush

and bottom of robot.

2. Cleaning dust bin and lter

Clean and empty dust bin after each use, steps are as shown in below ﬁgures.

NOTE:

After taking out dust bin, check whether there is foreign matter stuck in suck

passage and clean it. Wash HEPA ﬁlter after 15-30 days’ use and replace it after

use for 6 months at maximum.

• Install both HEPA and primary ﬁlters when they are dry.

• HEPA and primary ﬁlter could be replaced if needed.

3. Cleaning cli sensors and auto charging pins.

Slightly clean the sensor window and auto charging

pins with a soft dry cloth

NOTE:

Charge connecting points on charging dock

if it needs cleaning.

J 7 * .

U P `

www.PyleUSA.com

11

NO. Tone Cause Solution

Wheels don’t work

Check the wheels

or side brushes

Cli sensor or bumper

sensor failure

Clean cli sensor and

shake bumper slightly,

check if there’s

foreign matter

Main body gets stuck

Move main body

and start again

Troubleshooting

1. ERROR CODE SHEET

When the robot meets with some routine troubles, it will remind you by a

beep.

• Short tone

NOTE: If all above solutions don’t work, please take below actions.

1. Reset the robot by re-turning on the power switch.

2. If reset action doesn’t work, please send the robot to seller for repairing.

REMARK:

The storage temperature of this product is -20°C to 60°C

www.PyleUSA.com

12

PUCRC90EU - PUCRC90UK

Smart Robot Vacuum

Automatic Floor Cleaner with Sweep, Dust & Vacuum Ability

Features:

• Self-Programmed Robot Vacuum & Cleaner

• Keep it Clean: Sweep, Dust & Vacuum

• Take Control: Use the Wireless Remote & Steer the Vacuum

• Auto-Clean Schedule: Preset the Time for Daily Cleaning

• Versatile & Convenient Smart Floor Cleaning Ability

• Cleaning Path Navigation Automatically Returns to Charging Dock

• Works on Hardwood, Linoleum, Tile, Stone & Short/Hard Carpet

• Low-Prole Design Slides Underneath Furniture

• Anti-Fall Stair Sensors & Protective Bumper Housing

• Obstacle Detection Cleans Around Household Objects

• Convenient Dust Collection Bin Opens for Quick Disposal

• 'Bag-less' Vacuum Design for Easy Waste Disposal

• Integrated Reusable HEPA Filter & Washable Primary Filter

• One Button Operation & Auto-Start Activation

• Selectable Cleaning Modes: Auto, Spiral, Edge, Zig-Zag

• Built-in, Long Lasting Rechargeable Battery

• Dual Spinning Side Brushes Lift Debris

• Perfect for Home or Oce Use

www.PyleUSA.com

13

What’s in the Box:

• Smart Robot Vacuum

• Charging Station

• Remote Control

• (2) Detachable Sweep Brushes

• Power / Charge Adapter

Technical Specs:

• Dust Bin Capacity: 0.3L

• Average Charge Time: 5 Hours

• Vacuum Operation Run-Time: 90 Minutes

• Dual Debris Sweepers: 3.15’’ Diameters

• Remote Control Battery Operated, Requires (2) x ‘AAA’ Batteries

• Rechargeable Battery Type: Lithium-iOn 14.8V, 2600mAh

• Power: 120/240V, 19V Power Adapter

• Dimensions (L x W x H): 11.8’’ x 11.8’’ x 3.1’’ -inches

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: suppor[email protected]om

Pure Clean Smart Robot Vacuum User manual

This manual is also suitable for

Pure Clean Smart Robot Vacuum User manual

Related papers

Other documents