2. In-Sink-Erator
  3. SS-100-1
SS-100-1

In-Sink-Erator SS-100-1, SS-100-2, SS-100-3 User manual

  • Hello! I am an AI chatbot trained to assist you with the In-Sink-Erator SS-100-1 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the part number for the mounting flange?
    What is the part number for the shredder assembly?
    What is the part number for the upper end bell assembly?
    What is the part number for the rotor and shaft assembly?
    What is the part number for the stator assembly?
    What is the part number for the overload protector?
    What is the part number for the lower bearing?
    What is the part number for the bottom cover?
    What is the part number for the tailpipe flange?
    What is the part number for the foot assembly tube?
PARTS LIST FOR COMMERCIAL DISPOSERS MODEL
SS-100 IN-SINK-ERATOR
®
1 H.P.
(Includes Models SS-100-L, SS-100-2, SS-100-3)
ORDER BY PART NUMBER, NOT CODE NUMBER
(Minimum Parts Order $3.00)
(ALL PARTS F.O.B.FACTORY/DEPOT) (INCLUDE SERIAL AND MODEL NUMBER OF DISPOSER WHEN ORDERING)
EFFECTIVE March, 1972
PARTS LIST FOR COMMERCIAL DISPOSERS
MODEL SS-100. IN-SINK-ERATOR
®
1 H.P.
(Includes Models SS-100-1, SS-100-2, SS-100-3)
Code
No.
Part
No.
No.
Reqd
.
Description
1 11004 1 Mounting Flange
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Container
4 1491 6 Bolt, Mounting
5 11227 1 Pipe Plug
6 11006 1 Seal, Body-Shredder
7 12442 1 Body and Cover Assembly
8 11252-A 1 Stationary Shredder
9 11260 1 Nut, Shredder
10 12445 1 Washer
11 12142 1 Washer, Fibre
12 12316 I Rotor Shredder
13 12327 1 Upper End Bell- Includes
Codes 14-16-17-18
14 12321 1 Face Seal
15 12318 1 Spacer Sleeve
16 12319 1 Centrifugal Moisture Shield
17 12610 1 Bearing Assembly - Upper
18 12326 1 Oil and Water Retainer
19 11322 2 Woodruff Key
20 12611
Bearing - Seal Key Includes
Codes 9-10-11.14-15-16-17-18-19
21 11444 3 Washer
22 1491 3 Bolt
23 1470 1 Washer, Tail Pipe
24 5487 1 Tail Pipe
25 1461 1 Flange - Tail Pipe
26 1468 2 Bolt - Tail Pipe
27 12330-B
Rotor & Shaft Assembly (Includes
Codes 29 & 30)
208 Volt, 60 Cycle, Single Phase S,
115/230 Volt, 60 Cycle, Single Phase
28 1233I-B
Rotor & Shaft Assembly
208 Volt, 60 Cycle, Three Phase &
230/460 Volt, 60 Cycle, Three Phase
29 1537 2 Spring - Centrifugal Switch
30 12348 1 Centrifugal Switch
31 7422 2 Screw
32 12393 1 Start Switch
Code
No.
Part
No.
No.
Re
q
d
Description
33 5765 2 Screw
34 12370 1 Shell - Trim
35 12351-G 1 Stator Assembly
208 Volt, 60 Cycle, Single Phase
36 12351-B 1 Stator Assembly
115/230 Volt, 60 Cycle, Single Phase
37 12549-8 1 Siator Assembly
208 Volt, 60 Cycle, Three Phase
38 12352-8 1 Stator Assembly
230/460 Volt, 60 Cycle, Three Phase
39 12433 1 Terminal Box Mounting Bracket -
Single Phase
40 12433-E 1 Terminal Box Mounting Bracket -
Three Phase
41 11448 4 Screw
42 12384 1 Bushing
43 11868 1 Capacitor - Single Phase Only
44 12389 1 Overload Protector
208 Volt, 60 Cycle, Single Phase
115/230 Volt, 60 Cycle, Single Phase
45 12391 1 Overload Protector
208 Volt, 60 Cycle, Three Phase &
230/460 Volt, 60 Cycle, Three Phase
46 12378 1 Clamp, Overload
47 5765 2 Screw
48 12372 1 Terminal Box
49 12383 1 Grommet
50 12381 1 Screw
51 12415 1 Bearing - Lower
52 12399 1 Spring, Pre-load
53 12684 1 End Frame, Lower
54 12395 1 Fan
55 12635 I Retaining Ring
56 12490 3 Tube, Spacer
57 11940 3 Bolt, Thru
58 12396 1 Cover, Bottom
59 12586 2 Plug
60 11757-B 2 Leg (Optional)
61 12564 1 Ground Screw
ORDER BY PART NUMBER, NOT CODE NUMBER
(Minimum Parts Order $3.00)
(AIL PARTS F.O.B. FACTORY/DEPOT) (INCLUDE SERIAL AND MODEL NUMBER OF DISPOSER WHEN ORDERING)
Form No. C-I24-72C PRINTED IN U.S.A.
IN
-
SINK
-
E
BATOR DIVISION
EMERSON ELECTRIC CO.
4700-21ST STREET RACINE.
WISCONSIN S3406 PHONE:
(414) 637-6761
ORDER BY PART NUMBER, HOT CODE NUMBER
(All Part F.O.B. Agency/Dept) (Include Serial and Model Number of Disposer when ordering)
COMMERCIAL DISPOSER
CANADIAN
MODEL MODEL
SS-100-8 115/230/60/1 SS-100-12
SS-100-9 208/60/1 SS-100-13
SS-100-10 230/460/60/3 SS-100-14
SS-100-11 208/60/3 SS-100-15
Start with Serial #70.000
ISE
IN-SINK-ERATOR
September, 1979
H.P.
CANADIAN
MODEL MODEL
SS
-
100
-
8 115/230/60/1
SS
-
100
-
12
SS-100-9 208/60/1 SS-100-13
SS-100-10 230/460/60/3 SS-100-14
SS-100-11 208/60/3 SS-100-15
Code
No.
Port
No.
No.
Req.
Description Code No.
Part
No.
No.
Req.
Description
1 11004
1
Mounting Flange 36 130754 1 Stator Assembly
2 11016
1
Gasket, Mounting
115/230 Volt, 60 Hz, Single Phase
3 11020-A
1
Body. Container 37 13075-0 1 Stator Assembly
4 1491 6 Bolt, Mounting
208 Volt, 60 Hz, Single Phase
5 11227
1
Pipe Plug 38 13077-C 1 Stator Assembly
6 11006
1
Seal. Body-Shredder
230/460 Volt, 60 Hz, Three Phase
7 12443
1
Body and Cover Assembly 39 13076-8 I Stator Assembly
8 11252-A
1
1
Stationary Shredder
208 Volt, 60 Hz. Three Phase
9 11260
1
Nut. Shredder 40 13433 1 Terminal Box Mounting Bracket
10 12445
1
1
Washer
Single Phase
11 0143 1 Washer, Fibre 41 1243 3-E 1 Terminal Box Mounting Bracket
12 13944
1
Rotor Shredder
Three Phase
13 13081
1
End Bell, Upper Includes Codes 42 11448 4 Screw
14 thru 21 43 12384 1 Bushing
14 12936 1 Shield 44 11868 1 Capacitor (Single Phase only)
15 13137 6 Screw 45 12389 1 Overload Protector
16 12934-A 1 Seal Assembly 208 Volt. 60 Hz. Single Phase
17 12935
1
Sleeve Spacer
115/230 Volt, 60 Hz, Single Phase
18 13860
1
0'Ring 46 12391 1 Overload Protector
19 12319
1
Centrifugal Moisture Shield
208 Volt, 60 Hz. Three Phase
20 12610 1 Bearing Assembly - Upper 230/460 Volt, 60 Hz, Three Phase
21 13326 1 Oil and Watt Retains 47 12378 1 Clamp. Overload
22 11322 3 Woodruff Key 48 5765 2 Screw
23 13080 1 Bearing Seal Kit, Includes Codes 9, 10 49 12372 1 Terminal Box
11, 14, 15, 16, 17, 18, 19, 20, 21, 22 50 12383 1 Grommet
24 11444 3 Washer 51 12381 1 Screw
25 1491 3 Bolt 52 1241$ 1 Bearing, Lower
26 1470 1 Washer Tail Pipe 53 12399 1 Spring, Pre-load
27 5487 1 Toil Pipe 54 12684 1 End Frame, lower
28 1461 1 Range - Tail Pipe 55 123955 1 Fan
29 1460 2 Bolt - Tail Pipe 56 12635 1 Retaining Ring
30 12947-B 1 Rotor & Shaft Assembly 57 12490 3 Tube, Spacer
Includes Code #31 58 11940 3 Bolt, Thru
206 Volt, 60 Hz, Single Phase & 59 12396 1 Cover, Bottom
115/230 Volt, 60 Hz, Single Phone 60 12564 1 Ground Screw
31 12954 1 Centrifugal Switch Assembly 61 11757-B 2 Leg (Optional)
32 12948-B 1 Rotor & Shaft Assembly
208 Volt. 60 Hi, Three Phase
CANADIAN ONLY
230/460, 60 Hi, Three Phase 62 12928 1 Overload Protector
33 7433 2 Screw
115/230 Volt, 60 Hz. Single Phase
34 13393 1 Start Switch 63 11930 1 Overload Protector
35 12370 1 Shell - Trim 208 Volt, 60 Hz, Single Phase
ORDER BY PART NUMBER. MOT CODE NUMBER
(All Parts F.O.B. Agency/Depot) (Include Serial and Model Number of Disposer when ordering)
I
SE
IN SINK ERATOR
PRINTED IN USA
4173
JAM RELEASE BAR
11009
SPLASH BAFFLE
1124
SLEEVE GUARD
IN
-
SINK
-
ERATOR DIVISION
EMERSON ELECTRIC CO.
4700-21 ST STREET
RACINE. WISCONSIN 53406
PHONE: (414) 554-5432
IN
SINK
ERATOR
COMMERCIAL DISPOSER
MODEL No. SS100-16
(100 / 208 / Volt / 50/SOHz / 1 Phase) 1 H.P.
Start Date:
3/99
Engineer Number:
13025N
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE
PART
NO.
CODE
PART
NO.
NO. NO. REQ. DESCRIPTION NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
30
12947B
1
Rotor & Shaft Assembly
2 11016 1 Gasket, Mounting (Includes Codes 31 & 47 )
3 11020A 1 Body Upper Assy 31 12954 1 Centrifugal Actuator
4 1491 6 Screw (1/4-20 x 3/4) 32 8221 2 Screw (8-32 x 1/2)
5 11227 1 Plug, Pipe 33 12393 1 Switch, Start
6 11006 1 Gasket, Shredder 34 12370 1 Trim Band
7 12442 1 Body & Cover Assy 35 1836A 2 Screw (8-32 x 1/2)
8 11252A 1 Shredder, Stationary 36 13075E 1 Stator Assy
9 11260 1 Nut 37 12433 1 Bracket Assy (Mounting)
10 12445 1 Washer 38 11448 4 Screw (8-18 x 1/4)
11 12142 1 Washer, Fiber 39 12384 1 Bushing
12 12944 1 Rotor Shredder Assy 40 11868 1 Capacitor
13 13081 1 Upper End Bell Assy 41 13422L 1 Overload Protector
(Includes Codes 14-22) 42 12378 1 Clamp, Overload
14 12936 1 Shield 43 8221 2 Screw (8-32 x 1/2)
15 1269 6 Screw (8-18 x 1/2) 44 13396 1 Box, Terminal Assy
16 12934A 1 Seal Assy (Includes Code 40)
17 12935 1 Sleeve, Spacer 45 12381 1 Screw (8-32 x 1-1/4)
18 12860 1 0-Ring 46 12383 1 Grommet, Overload
19 12319 1 Slinger 47 12415 1 Bearing, Lower
20 12610 1 Upper Bearing Assy 48 12399 1 Spring, Pre-load
21 12326 1 Water & Oil Seal 49 12684 1 End Frame, Lower
22 11322 3 Key. Woodruff 50 12395 1 Fan
23 13080 1 Kit, Bearing Seal 51 12635 1 Ring, Retaining
(Includes Codes 9-11 & 14-22) 52 12490 3 Tube, Spacer
24 11444 3 Washer, Lock 53 11940A 1 Bolt, Thru
25 3135 3 Screw (1/4-20x1) 54 12396 1 Cover, Bottom
26 1470 1 Gasket, Tailpipe 55 2466A 1 Screw, Ground
27 8219 1 Tailpipe 56 11757B 2 Tube, Foot Assembly
28 1461 1 Flange, Tailipe (Optional)
29 1468 2 Screw (1/4-20x1/2)
ORDER BY PART NUMBER, NOT CODE NUMBER
(All Pans F.O.B. Agency/Depot) (Include Serial and Model Number of Disposer when ordering)
ISE
IN-SINK-ERATOR
COMMERCIAL DISPOSER
MODEL
SS-100-18 115/208/230/60/1
SS-100-19 208/230/460/60/3
May.
1985
1
H.P.
IN
-
SINK
-
ERATOR
COMMERCIAL
DISPOSER
MODEL NO. SS100-20
CANADIAN (115/208-30/60/10)
Start Date:
7/87
Engineer Number
130858
0RDER BY PART NUMBER, NOTCODE NUMBER
CODE
PART
NO.
DESCRIPTION
CODE
PART
NO.
DESCRIPTION
NO. NO. REQ.
NO. NO. REQ.
1
11004
1
Flange, Mounting
31
12954
1
Centrifugal Actuator
2 11016
1
Gasket, Mounting
(Single Phase Only)
3 11020-A
1
Body Assy, Upper 32 8221 2 Screw
4 1491 6 Screw, Mounting 33 12393 1 Switch, Start
5 11227 1 Pipe Plug (Single Phase Only)
6 11006
1
Gasket, Shredder 34 12370 1 Trim, Band
7 12442
1
Body & Cover Assy 35 1836-A 2 Screw
8 11252-A
1
Shredder, Stationary 36 13075-E 1 Stator Assy
9 11260
1
Nut
(Single Phase)
10 12445
1
Washer 37 12433 1 Bracket Assy
11 12142
1
Washer, Fiber
(Mounting) (Single Phase)
12 12944
1
Shredder Assy, Rotor 38 11448 4 Screw
13 13081
1
End Bell Assy, Upper 39 12384 1 Bushing
(Incl. Codes 14 thru 22) 40 11868 1 Capacitor
14 12936 1 Shield
(Single Phase Only)
15 1269 6 Screw, Tapping 41 13422-L 1 Overload, Protector
16 12934-A 1 Seal Assy (Single Phase)
17 12935 1 Sleeve, Spacer 42 12378 1 Clamp, Overload
18 12860 1 0-Ring 43 5765 2 Screw, Tapping
19 12319 1 Slinger 44 12372 1 Box, Terminal
20 12610 1 Bearing Assy, Upper 45 12381 1 Screw
21 12326 1 Seal, Water & Oil 46 12383 1 Grommet, Overload
22 11322 3 Key, Woodruff 47 12415 1 Bearing, Lower
23 13080 1 Bearing Seal Kit 48 12399 1 Washer, Spring
(Incl. Codes 9-11 49 12684 1 End Frame, Lower
& 14 thru 22) 50 12395 1 Fan
24 1)444 3 Washer, Lock 51 12635 1 Ring, Retaining
25 3135 3 Screw 52 12490 3 Tube, Spacer
26 1470 1 Gasket, Tailpipe 53 11940-A 3 Bolt, Thru
27 5487 1 Tailpipe 54 12396 1 Cover, Bottom
28 1461 1 Flange, Tailpipe 55 2466-A 1 Screw, Ground
29 1468 2 Screw, Tailpipe 56 11757-B 2 Tube Assy, Foot
30 12947-B 1 Rotor & Shaft Assy
(Optional)
(Single Phase)
(Incl. Codes 31 & 47)
Start Date:
7/87
IN-SINK-ERATOR
COMMERCIAL DISPOSER
MODEL NO. SS100-22
U.S.A.
(208-30/460/60/30)
Engineer Number
13385D
1 H.P.
ORDER BY PART NUMBER NOT
CODE
NO.
PART NO. NO. REQ. DESCRIPTION CODE NO.
PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange
, Mounting
29
1468
2
Screw, Tailpipe
2 11016
1
Gasket, Mounting 30 12948-B 1 Rotor & Shaft Assy
3 11020-A
1
Body Assy, Upper
(Three Phase)
4 1491 6 Screw, Mounting
(IncI Code 43)
5 11227
1
Pipe Plug 31 12370 1 Trim, Band
6 11006
1
Gasket, Shredder 32 1836-A 2 Screw
7 12442
1
Body & Cover Assy 33 13077-C 1 Stator Assy
8 11252-A
1
Shredder, Stationary
(Three Phase)
9 11260 1 Nut 34 12433-E 1 Bracket, Terminal Box
10 12445 1 Washer
(Three Phase)
11 12142 1 Washer, Fiber 35 11448 4 Screw
12 12944 1 Shredder Assy, Rotor 36 12384 1 Bushing
13 13081 1 End Bell Assy, Upper 37 13422-N 1 Overload, Protector
(IncI Codes 14 thru 22)
(Three Phase)
14 12936 1 Shield 38 12378 1 Clamp, Overload
15 1269 6 Screw, Tapping 39 5765 2 Screw, Tapping
16 12934-A 1 Seal Assy 40 12372 1 Box, Terminal
17 12935 1 Sleeve, Spacer 41 12381 1 Screw
18 12860 1 0-Ring 42 12383 1 Grommet, Overload
19 12319 1 Slinger 43 12415 1 Bearing, Lower
20 12610 1 Bearing Assy, Upper 44 12399 1 Washer, Spring
21 12326 1 Seal, Water & Oil 45 12684 1 End Frame, Lower
22 11322 3 Key, Woodruff 46 12395 1 Fan
23 13080 1 Bearing Seal Kit 47 12635 1 Ring, Retaining
(IncI Codes 9.11 48 12490 3 Tube, Spacer
& 14 thru 22) 49 11940-A 3 Bolt. Thru
24 11444 3 Washer, Lock 50 12396 1 Cover, Bottom
25 3135 3 Screw 51 2466-A 1 Screw, Ground
26 1470 1 Gasket, Tail pipe 52 11757-B 2 Tube Assy, Foot
27 5487 1 Tailpipe
(Optional)
28 1461 1 Flange, Tailpipe
IN-SINK-ERATOR
COMMERCIAL DISPOSER
MODEL NO. SS100-23
CANADIAN
(208-230/460/60/30)
Start Date:
7/87
Engineer Number:
13385E
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE NO.
PART NO. NO. REQ. DESCRIPTION CODE NO. PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
29
1468
2
Screw, Tailpipe
2
11016
1
Gasket, Mounting
30
12948
-
B
1
Rotor
&
Shaft Assy
3
11020
-
A
1
Body Assy, Upper
(Three Phase)
4
1491
6
Screw, Mounting
(IncI. Code
43)
5
11227
1
Pipe Plug
31
12370
I
Trim, Band
6
11006
1
Gasket, Shredder
32
1836
-
A
2
Screw
7
12442
1
Body
&
Cover Assy
33
13077
-
C
1
Stator Assy
8
11252
-
A
1
Shredder, Stationary
(Three Phase)
9
11260
1
Nut
34
12433
-
E
1
Bracket, Terminal Box
10
12445
1
Washer
(Three Phase)
11
12142
1
Washer,
Fiber
35
11448
4
Screw
12
12944
1
Shredder Assy, Rotor
36
12384
1
Bushing
13
13081
1
End Bell Assy, Upper
37
13422
-
N
1
Overload, Protector
(IncI. Codes
14
thru
22)
(Three Phase)
14
12936
1
Shield
38
12378
1
Clamp, Overload
15
1269
6
Screw
, Tapping
39
5765
2
Screw, Tapping
16
12934
-
A
1
Seal Assy
40
12372
1
Box, Terminal
17
12935
1
Sleeve, Spacer
41
12381
1
Screw
18
12860
1
0
-
Ring
42
12383
1
Grommet, Overload
19
12319
1
Slinger
43
12415
1
Bearing, lower
20
12610
1
Bearing Assy, Upper
44
12399
1
Washer, Spring
21
12326
1
Seal, Water
&
Oil
45
12684
1
End Frame, Lower
22
11322
3
Key, Woodruff
46
12395
1
Fan
23
13080
1
Bearing Seal Kit
47
12635
1
Ring, Retaining
(IncI. Codes
-
11
48
12490
3
Tube, Spacer
& 14
thru
22)
49
1194
0
-
A
3
Bolt, Thru
24
11444
3
Washer, Lock
50
12396
1
Cover, Bottom
25
3135
3
Screw
51
2466
-
A
1
Screw, Ground
26
1470
1
Gasket, Tailpipa
52
11757
-
B
2
Tube Assy, Foot
27
5487
1
Tailpipe
(Optional)
28
1461
1
Flange, Tailpipe
ISE
IN-SINK-ERATOR
COMMERCIAL DISPOSER
MODEL NO. SS100-24
(115/208/230 Volt/60HZ/1 Phase) 1 H.P.
Start Date:
03/90
Engineer Number
13385-0
Rev. 4/96
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE NO.
PART NO. NO. REQ. DESCRIPTION CODE NO. PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
27
12954
1
Centrifugal Actuator
2 11016 1 Gasket, Mounting 28 8221 2 Screw (8-32x1/2)
3
11020-A
1
Body, Assy, Upper
29
12393
1
Switch, Start
4 1491 6 Screw (1/4-20x3/4) 30 12370 1 Trim Band
5
11227
1
Plug, Pipe
31
1836-A
2
Screw (8-32x1/2)
6 11006 1 Gasket, Shredder 32 13075-E 1 Stator Assy
7 12442 1 Assy, Body & Cover 33 12433 1 Bracket Assy
8
11252-A
1
Shredder, Stationary
(Mounting)
9 11260 1 Nut 34 11448 4 Screw (8-18x1/4)
10 12445 1 Washer 35 11868 1 Capacitor
11
12142
1
Washer, Fiber
36
12378
1
Clamp, Overload
12
13586
1
Assy, Rotor Shredder
37
5765
2
Screw (8-32x1/2)
13 13597 1 Assy, Upper End Bell 38 13396-E 1 Box, Terminal Assy
(Incl. Codes 14 - 22)
(Incl. code 41)
14 12936 1 Shield 39 12381 1 Screw (8-32x1-1/4)
15
1269
6
Screw (8-18x1/2)
40
13559
1
Grommet, Overload
16 12934-A 1 Assy, Seal 41 13422BB 1 Overload Protector
17
12935
1
Sleeve, Spacer
42
12384
1
Bushing
18 12860 1 0-Ring 43 2466-A 1 Screw, Ground
19 12319 1 Slinger 44 12415 1 Bearing, Lower
20 12610 1 Bearing Assy, Upper 45 12399 1 Spring, Pre Load
21
12326
1
Seal, Water & Oil
46
12684
1
End Frame, Lower
22
11322
3
Key, Woodruff
47
12395
1
Fan
23 13080 1 Kit, Bearing Seal (Incl. 48 12635 1 Ring, Retaining
codes 9-11 &14-22) 49 12490 3 Tube, Spacer
24
11444
3
Washer, Lock
50
11940-A
3
Bolt, Thru
25
3135
3
Screw (1/4-20x1)
51
12396
1
Cover, Bottom
26
13592
1
Rotor & Shaft A\ssy.
52
11757-B
2
Tube, Foot Assy.
(Incl. Codes 27 & 42)
(Optional)
ENVIROVAC
COMMERCIAL DISPOSER
MODEL NO. SS100-25
(208/230/460 Volt/60 Hz/3 Phase) 1 H.P.
Start Date:
08/90
Engineer Number
13385-H
Rev. 1/96
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE
PART
NO.
DESCRIPTION
CODE
PART NO.
NO.
DESCRIPTION
1 11004 1 Flange, Mounting 25 3135 3 Screw (1/4-20x1)
2 11016 1 Gasket, Mounting 26 13592-A 1 Rotor & Shaft Assy.
3 11020-A 1 Body, Assy, Upper
(Ind. Codes 40)
4 1491 6 Screw (1/4-20x3/4) 27 12370 1 Trim Band
5 11227 1 Plug, Pipe 28 1836-A 2 Screw (8-32x1/2)
6 11006 1 Gasket, Shredder 29 13714-B 1 Stator Assy
7 12442 1 Assy, Body & Cover 30 12433-E 1 Bracket Assy (Mounting)
8 11252-A 1 Shredder, Stationary 31 11448 4 Screw (8-18x1/4)
9 11260 1 Nut 32 12378 1 Clamp, Overload
10
10
12445 1 Washer 33 8221 2 Screw (8-32x1/2)
11 12142 1 Washer Fiber 34 13396 1 Box, Terminal Assy
12
13586 1
Assy, Rotor Shredder
(Inc), code 36)
13
13566
1
^^Q7
-
A
1 Assy, Upper End Bell 35 12381 1 Screw (8-32x1-1/4)
(lncl.Codes14.22) 36 12383 1 Grommet, Overload
14 12936 1 Shield 37 13422BD 1 Overload Protector
15 1269 6 Screw (8-18x1/2) 38 12384 1 Bushing
16 12934-A 1 Assy, Seal 39 2466-A 1 Screw, Ground
17 12935 1 Sleeve, Spacer 40 13709 1 Bearing, Lower
18 12860 1 0-Ring 41 13678 1 Spring, Pre-load
19 12319 1 Slinger 42 12684 1 End Frame, Lower
20 12610 1 Assy, Upper Bearing 43 12395 1 Fan
21 12326 1 Seal, Water & Oil 44 13677 1 Ring, Retaining
22 11322 3 Key, Woodruff 45 12490 3 Tube, Spacer
23 13080 1 Kit, Bearing Seal 46 12396 1 Cover, Bottom
(lncl. codes9-11&14-22) 47 11940-A 3 Bolt, Thru
24 11444 3 Washer, Lock 48 11757-B 2
Tube, Foot Assy.
(Optional)
ISE
IN-SINK-ERATOR
COMMERCIAL DINPOSEDR
MODEL NO. SS100-28
(115/208/230 Volt / 60Hz /1 Phase)
09/09/92
Engineer Number:
13660
1H.P.
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO.
PART NO.
NO. REQ.
DESCRIPTION
CODE NO.
PART NO.
NO.
REQ.
DE
SCRIPTION
1
11004
1
Flange, Mounting
31
13708
1
Centrifugal Actuator
2 11016 1 Gasket, Mounting 32 8221 2 Screw (8-32x1/2)
3 11020-A 1 Body. Assy, Upper 33 13707 1 Switch, Start
4 1491 6 Screw (1/4-20x3/4) 34 12370 1 Trim Band
5 11227 1 Plug, Pipe 35 1836-A 2 Screw(8-32x1/2)
6 11006 1 Gasket, Shredder 36 13713-B 1 Stator Assy
7 12442 1 Assy, Body & Cover 37 12433 1 Bracket Assy
8 11252-A 1 Shredder, Stationary
(Mounting)
9 11260 1 Nut 38 11448 4 Screw (8-18x1/4)
10 12445 1 Washer 39 12384 1 Bushing
11 12142 1 Washer, Fiber 40 11868 1 Capacitor
12 12944 1 Assy, Rotor Shredder 41 13422-E 1 Overload Protector
13 13722 1 Assy, Upper End Bell 42 12378 1 Clamp, Overload
(lncl.Codes14-22) 43 8221 2 Screw (8-32x1/2)
14 12936 1 Shield 44 13396 1 Box, Terminal Assy
15 1269 6 Screw (8-18x1/2)
(Incl. code 46)
16 12934-A 1 Assy, Seal 45 12381 1 Screw (8-32X1-1/4)
17 12935 1 Sleeve,Spacer 46 12383 1 Grommet, Overload
18 12860 1 0-Ring 47 13709 1 Bearing,Lower
19 12319 1 Slinger 48 13678 1 Spring, Pre-load
20 12610 1 Assy, Upper Bearing 49 13710 1 End Frame, Lower
21 12326 1 Seal, Water & Oil 50 13676 1 Fan
22 11322 3 Key, Wood ruff 51 13677 1 Ring, Retaining
23 13080 1 Kit. Bearing Seal (Incl. 52 12490 3 Tube,Spacer
codes 9-11& 14-22) 53 11940-A 3 Bolt, Thru
24 11444 3 Washer, Lock ' 54 12396 1 Cover, Bottom
25 3135 3 Screw(1/4-20x1) 55 2466-A 1 Screw, Ground
26 1470 1 Gasket, Tailpipe 56 11757-B 2 Tube, Foot Assy.
27 5487 1 Tailpipe
(Optional)
28 1461 1 Flange, Tail pipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-B 1 Rotor & Shaft Assy.
(Incl. Codes 31 & 47)
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO. PART NO. NO. REQ. DESCRIPTION CODE NO. PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
28
1461
1
Flange, Tailpipe
2 11016 1 Gasket, Mounting 29 1468 2 Screw (1/4-20x1/2)
3 11020-A 1 Body, Assy, Upper 30 13674-H 1 Rotor & Shaft Assy
4 1491 6 Screw (1/4-20x3/4)
(Incl. Code 43)
5 11227 1 Pipe, Plug 31 12370 1 Trim, Band
6 11006 1 Gasket, Shredder 32 1836-A 2 Screw (8-32x1/2)
7 12442 1 Body & Cover Assy 33 13714-B 1 Staler Assy
8 11252-A 1 Shredder, Stationary 34 12433-E 1 Bracket Assy
9 11260 1 Nut
(Mounting)
10 12445 1 Washer 35 11448 4 Screw (8-18x1/4)
11 12142 1 Washer, Fiber 36 12384 1 Bushing
12 12944 1 Shredder Assy, Rotor 37 13422-N 1 Overload, Protector
13 13722 1 End Bell Assy, Upper 38 12378 1 Clamp, Overload
(Incl. Codes 14 thru 22) 39 8221 2 Screw (8-32x1/2)
14 12936 1 Shield 40 13396 1 Box, Terminal
15 1269 6 Screw (8-18x1/2)
(Incl. code 42)
16 12934-A 1 Seal Assy 41 12381 1 Screw (8-32x1-1/4)
17 12935 1 Sleeve, Spacer 42 12383 1 Grommet, Overload
18 12860 1 0-Ring 43 13709 1 Bearing, Lower
19 12319 1 Slinger 44 13678 1 Spring, Pre-load
20 12610 1 Bearing Assy, Upper 45 13747 1 End Frame, Lower
21 12326 1 Seal, Waters Oil 46 13676 1 Fan
22 11322 3 Key, Woodruff 47 13677 1 Ring, Retaining
23 13080 1 Bearing Seal Kit (Incl. 48 12490 3 Tube, Spacer
codes
-
10
-
11 & 14
thru
22)
49 11940-A 3 Bolt, Thru-
24 11444 3 Washer, Lock 50 12396 1 Cover. Bottom
25 3135 3 Screw (1/4-20x1/2) 51 2466-A 1 Screw, Ground
26 1470 1 Gasket, Tailpipe 52 11757-B 2 Tube Assy, Foot
27 5487 1 Tailpipe (Optional)
ISE
IN-SINK-ERATOR
COMMERCIAL DISPOSER
MODEL NO. SS100-29
(208/230/460Volt / 60H2 / 3 Phase)
Start Date:
09-01-92
Engineer Number:
13660
-
A
1
H.P.
Start Data:
02/26/93
ISE
IN-SINK-ERATOR
COMMERCIAL DISPOSER
MODEL NO. SS100-30 (C.S.A.)
(115/208/230 Volt / 60Hz /1 Phase)
Engineer Number:
13660-B
1 H.P.
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE NO. PART NO. NO. REQ. DESCRIPTION CODE NO.
PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
31
13708
1
Centrifugal Actuator
2 11016 1 Gasket, Mounting 32 8221 2 Screw (8-32x1/2)
3 11020-A 1 Body, Assy, Upper 33 13707 1 Switch, Start
4 1491 6 Screw (1/4-20x3/4) 34 12370 1 Trim Band
5 11227 1 Plug, Pipe 35 1836-A 2 Screw (8-32x1/2)
6 11006 1 Gasket, Shredder 36 13713-B 1 Stator Assy
7 12442 1 Assy, Body & Cover 37 12433 1 Bracket Assy
8 11252-A 1 Shredder, Stationary
(Mounting)
9 11260 1 Nut 38 11448 4 Screw (8-18x1/4)
10 12445 1 Washer 39 12384 1 Bushing
11 12142 1 Washer, Fiber 40 11868 1 Capacitor
12 12944 1 Assy, Rotor Shredder 41 13422-E 1 Overload Protector
13 13722 1 Assy, Upper End Bell 42 12378 1 Clamp, Overload
(lncl.Codes14.22) 43 8221 2 Screw (8-32x1/2)
14 12936 1 Shield 44 13396 1 Box, Terminal Assy
15 1269 6 Screw (8-18x1/2) (Incl. code 46)
16 12934-A 1 Assy, Seal 45 12381 1 Screw (8-32x1-1/4)
17 12935 1 Sleeve, Spacer 46 12383 1 Grommet, Overload
18 12860 1 0-Ring 47 13709 1 Bearing, Lower
19 12319 1 Slinger 48 13678 1 Spring, Pre-load
20 12610 1 Assy, Upper Bearing 49 13710 1 End Frame, Lower
21 12326 1 Seal, Water & Oil 50 13676 1 Fan
22 11322 3 Key, Woodruff 51 13677 1 Ring, Retaining
23 13080 1 Kit, Bearing Seal (Incl. 52 12490 3 Tube, Spacer
Codes 9-11 &14-22) 53 11940-A 3 Bolt, Thru
24 11444 3 Washer, Lock 54 12396 1 Cover, Bottom
25 3135 3 Screw (1/4-20xl) 55 2466-A 1 Screw, Ground
26 1470 1 Gasket, Tailpipe 56 11757-B 2 Tube, Foot Assy.
27 5487 1 Tailpipe
(Optional)
28 1461 1 Flange, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-B 1 Rotor & Shaft Assy.
(Incl. Codes 31 & 47)
ISE
IN-SINK-ERATOR
COMMERCIAL DISPOSER
MODEL NO. SS100-31 (C.S.A.)
(208/230/460VoK / 60Hz / 3 Phase)
Start Date:
02/26/93
Engineer Number:
13660-C
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO. PART NO. NO. REQ. DESCRIPTION CODE NO. PART NO. NO. REQ. DESCRIPTION
1 11004 1 Flange, Mounting 28 1461 1 Flange, Tailpipe
2 11016
1
Gasket, Mounting 29 1468 2 Screw (1/4-20x1/2)
3 11020-A
1
Body, Assy, Upper 30 13674-H 1 Rotor & Shaft Assy
4 1491 6 Screw (1/4-20x3/4)
(Incl. Code 43)
5 11227 1 Pipe, Plug 31 12370 1 Trim, Band
6 11006
1
Gasket, Shredder 32 1836-A 2 Screw (8-32x1/2)
7 12442
1
Body & Cover Assy 33 13714-B 1 Stator Assy
8 11252-A
1
Shredder, Stationary 34 12433-E 1 Bracket Assy
9 11260
1
Nut
(Mounting)
10 12445
1
Washer 35 11448 4 Screw (8-18x1/4)
11 12142 1 Washer, Fiber 36 12384 1 Bushing
12 12944 1 Shredder Assy, Rotor 37 13422-N 1 Overload, Protector
13 13722 1 End Bell Assy, Upper 38 12378 1 Clamp, Overload
(Incl. Codes 14 thru 22) 39 8221 2 Screw (8-32x1/2)
14 12936 1 Shield 40 13396 1 Box, Terminal
15 1269 6 Screw (8-18x1/2)
(Incl. code 42)
16 12934-A 1 Seal Assy 41 12381 1 Screw (8-32x1-1/4)
17 12935 1 Sleeve, Spacer 42 12383 1 Grommet, Overload
18 12860 1 O-Ring 43 13709 1 Bearing, Lower
19 12319 1 Slinger 44 13678 1 Spring, Pre-load
20 12610 1 Bearing Assy, Upper 45 13747 1 End Frame, Lower
21 12326 1 Seal, Water& Oil 46 13676 1 Fan
22 11322 3 Key, Woodruff 47 13677 1 Ring, Retaining
23 13080 1 Bearing Seal Kit (Incl. 48 12490 3 Tube, Spacer
codes 9-10-11 & 14 thru 22) 49 11940-A 3 Bolt, Thru
24 11444 3 Washer, Lock 50 12396 1 Cover, Bottom
25 3135 3 Screw (1/4-20x1/2) 51 2466-A 1 Screw, Ground
26 1470 1 Gasket, Tailpipe 52 11757-B 2 Tube Assy, Foot
27
5487
1
Tailpipe
(Optional)
1
H.P.
ENVIROVAC
COMMERCIAL DISPOSER
MODEL NO. SS100-32
(115/208/230 Volt / 50/SOHz /1 Phase)
Start Date:
02/19/93
Engineer Number:
13660-D
1H.P.
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE PART NO.
CODE PART NO.
NO. NO. REQ. DESCRIPTION NO. NO. REQ. DESCRIPTION
1 11004
1
Flange, Mounting 31 1836-A 2 Screw (8-32x1/2)
2 11016
1
Gasket, Mounting 32 13713-B 1 Stator Assy
3 11020-A
1
Body, Assy, Upper 33 12433 1 Bracket Assy
4 1491 6 Screw (1/4-20x3/4)
(Mounting)
5 11227
1
Rug, Pipe 34 11448 4 Screw (8-18x1/4)
6 11000
1
Gasket, Shredder 35 11868 1 Capacitor
7 12442
1
Assy, Body & Cover 36 12378 1 Clamp, Overload
8 11252-A
1
Shredder, Stationary 37 8221 2 Screw (8-32x1/2)
9 11260 1 Nut 38 13396-E 1 Box, Terminal Assy
10 12445 1 Washer
(Incl. code 40)
11 12142 1 Washer, Fiber 39 12381 1 Screw (8-32x1-1/4)
12 13586 1 Assy, Rotor Shredder 40 13559 1 Plug, Button
13 13597-A 1 Assy, Upper End Bell 41 13422-BB 1 Overload Protector
(Incl. Coda* 14-22) 42 12384 1 Bushing
14 12936 1 Shield 43 2466-A 1 Screw, Ground
15 1269 6 Screw (8-18x1/2) 44 13709 1 Bearing, Lower
16 12934-A 1 Assy, Seal 45 13678 1 Spring, Pre-load
17 12935 1 Sleeve, Spacer 46 13710 1 End Frame, Lower
18 12860 1 0-Ring 47 13676 1 Fan
19 12319 1 Slinger 48 13677 1 Ring, Retaining
20 12610 1 Assy, Upper Bearing 49 12490 3 Tube, Spacer
21 12326 1 Seal, Water & Oil 50 12396 1 Cover, Bottom
22 11322 3 Key. Woodruff 51 11940-A 3 Bolt, Thru
23 13080 1 Kit. Bearing Seal (Ind. 52 11757-B 2 Tube, Foot Assy.
Codes 9-11 & 14-22)
(Optional)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 13592-C 1 Rotor & Shaft Assy.
(Incl. Codes 27 & 44)
27 1370S 1 Centrifugal Actuator
28 8221 2 Screw (8-32x1/2)
29 13707 1 Switch, Start
30 12370 1 Trim Band
Start Date:
02/19/93
ENVIROVAC
COMMERCIAL DISPOSER
MODEL NO. SS100-34
1 YR (208/230/380 Volt / 50 Hz / 3 Phase) 1 H.P.
FULL WRNTY
Engineer
Number
13660
-
G
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE
NO.
PART
NO.
NO.
REQ.
DESCRIPTION
CODE
NO.
PART
NO.
NO.
REQ.
DESCRIPTION
1 11004 1 Flange, Mounting 30 12433-P 1 Bracket Assy
2
11016
1
Gasket, Mounting
(Mounting)
3 11020-A 1 Upper Body Assy 31 11448 4 Screw (8-18x1/4)
4 1491 6 Screw (1/4-20x3/4) 32 12378 1 Clamp, Overload
5 11227 1 Plug, Pipe 33 8221 2 Screw (8-32x1/2)
6 11006 1 Gasket. Shredder 34 13396-E 1 Box, Terminal Assy
7 12442 1 Body & Cover Assy
(Incl. code 36)
8
11252-A
1
Shredder, Stationary
35
12381
1
Screw (8-32x1-1/4)
9 11260 1 Nut 36 13559 1 Grommet, Overload
10
12445
1
Washer
37
13422-BE
1
Overload Protector
11 12142 1 Washer, Fiber 38 12384 1 Bushing
12 13588 1 Rotor Shredder Assy 39 2466-A 1 Screw, Ground
13
13928
1
Upper End Bell Assy
40
13709
1
Bearing, Lower
(lncl.Codes14.22) 41 13678 1 Spring, Pre-load
14 12936 1 Shield 42 13747 1 End Frame, Lower
15
13919
6
Screw (8-18x1/2)
43
13676
1
Fan
16 12934-A 1 Seal Assy 44 13677 1 Ring, Retaining
17 12935 1 Sleeve, Spacer 45 12490 3 Tube, Spacer
18
12860
1
0-Ring
46
12396
1
Cover, Bottom
19 12319 1 Slinger 47 11940-A 3 Bolt, Thru
20 12322 1 Upper Bearing Assy 48 11757-B 2 Tube, Foot Assy.
21 12326 1 Seal. Water & Oil
(Optional)
22 11322 3 Key, Woodruff
23 13080-A 1 Kit, Bearing Seal
(lncl. Codes 9-11&14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 13592-E 1 Rotor & Shaft Assy.
(Incl. Codes 40)
27 12370 1 Trim Shell
28
1836-A
2
Screw (8-32x1/2)
29
13714
-
B
1
Stator
Assy
Start date:
04/21/93
ISE
IN-SINK-ERATOR
COMMERCIAL DISPOSER
MODEL NO. SS100-35 (EXPORT)
(100 Volt / 50/60Hz /1 Phase)
Engineer
Number
13660
-
H
1 H.P.
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE NO.
PART NO. NO. REQ. DESCRIPTION CODE NO.
PART NO. NO. REQ. DESCRIPTION
1 11004 1 Flange, Mounting 31 14131 1 Centrifugal Actuator
2 11016 1 Gasket, Mounting 32 8221 2 Screw (8-32x1/2)
3 11020-A 1 Body, Assy, Upper 33 13707 1 Switch, Start
4 1491 6 Screw (1/4-20x3/4) 34 12370 1 Trim Band
5 11227
1
Plug, Pipe 35 1836-A 2 Screw (8-32x1/2)
6 11006
1
Gasket, Shredder 36 13713-B 1 Stator Assy
7 12442
1
Assy, Body & Cover 37 12433 1 Bracket Assy
8 11252-A
1
Shredder, Stationary
(Mounting)
9 11260 1 Nut 38 11448 4 Screw (8-18x1/4)
10 12445
1
Washer 39 11868 1 Capacitor
11 12142
1
Washer. Fiber 40 12378 1 Clamp, Overload
12 12944 1 Assy, Rotor Shredder 41 8221 2 Screw (8-32x1/2)
13 13722
1
Assy, Upper End Bell 42 13396 1 Box, Terminal Assy
(Incl. Codes 14-22)
(Incl. code 48)
14 12936
Shield 43 12381 1 Screw (8-32x1-1/4)
15 1269 6 Screw (8-18x1/2) 44 12383 1 Grommet, Overload
16 12934-A
Assy, Seal 45 13422-T 1 Overload Protector
17 12935
Sleeve, Spacer 46 12384 1 Bushing
18 12860
0-Ring 47 2466-A 1 Screw, Ground
19 12319 1 Slinger 48 13709 1 Bearing, Lower
20 12610 1 Assy, Upper Bearing 49 13678 1 Spring, Pre-load
21 12326 1 Seal, Water & Oil 50 13710 1 End Frame, Lower
22 11322 3 Key. Woodruff 51 13676 1 Fan
23 13080 1 Kit, Bearing Seal (Incl. 52 13677 1 Ring, Retaining
Codes 9-11 & 14-22) 53 11940-A 3 Bolt, Thru
24 11444 3 Washer, Lock 54 12490 3 Tube, Spacer
25 3135 3 Screw (1/4-20x1) 55 12396 1 Cover, Bottom
26 1470 1 Gasket, Tailpipe 56 11757-B 2 Tube, Foot Assy.
27 5487 1 Tailpipe
(Optional)
28 1461 1 Flange, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-8 1 Rotor & Shaft Assy.
(Incl. Codes 31 & 48)
ENVIROVAC
COMMERCIAL DISPOSER
MODEL NO. SS100-36
(460 Volt / 60 Hz / 3 Phase)
Start Date:
11/29/93
Engineer Number:
13660-J
1 H.P.
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE
NO.
PART
NO.
NO.
REQ.
DESCRIPTION
CODE
NO.
PART
NO.
NO.
REQ.
DESCRIPTION
1
11
004
1
Flange, Mounting
30
12433
-
E
1
Bracket Assy
2 11016 1 Gasket, Mounting
(Mounting)
3 11020-A
1 Body, Assy, Upper 31 11448 4 Screw (8-18x1/4)
4 1491 6 Screw (1/4-20x3/4) 32 12378 1 Clamp, Overload
5 11227 1 Plug, Pipe 33 8221 2 Screw (8-32x1/2)
6 11006 1 Gasket, Shredder 34 13396-E
1 Box, Terminal Assy
7 12442 1 Assy, Body & Cover
(Incl. code 36)
8 13798 1 Shredder, Stationary 35 12381 1 Screw (8-32x1-1/4)
9 11260 1 Nut 36 12383 1 Grommet, Overload
10 12445 1 Washer 37
13422
-
BE
1 Overload Protector
11 12142 1 Washer, Fiber 38 12384 1 Bushing
12 13799 1 Assy, Rotor Shredder 39 2466 -A 1 Screw, Ground
13 13597-A
1 Assy, Upper End Bell 40 13709 1 Bearing, Lower
(Incl. Codes 14-22) 41 13678 1 Spring, Pre-load
14 12936 1 Shield 42 13710 1 End Frame, Lower
15 1269 6 Screw (8-18x1/2) 43 13676 1 Fan
16 12934-A
1 Assy, Seal 44 13677 1 Ring, Retaining
17 12935 1 Sleeve, Spacer 45 12490 3 Tube, Spacer
18 12860 1 O-Ring 46 12396 1 Cover, Bottom
19 12319 1 Slinger 47 11940-A
3 Bolt, Thru
20 12610 1 Assy, Upper Bearing 48 11757-B
2 Tube, Foot Assy
21 12326 1 Seal, Water & Oil
(Optional)
22 11322 3 Key, Woodruff
23 13080 1 Kit, Bearing Seal (Incl.
Codes 9-11 & 14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 13592-E
1 Rotor & Shaft Assy.
(Incl. Codes 40)
27 12370 1 Trim Band
28 1836-A 2 Screw (8-32x1/2)
29 13657^J 1 Stator Assy
ENVIROVAC
COMMERCIAL DISPOSER
MODEL NO. SS100-37
(380 Volt / 50 Hz / 3 Phase)
Start Date:
11/29/93
Engineer Number:
13660-K
1 H.P.
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE
NO.
PART
NO.
NO.
REQ.
DESCRIPTION
CODE
NO.
PART
NO.
NO.
REQ.
DESCRIPTION
1 11004 1 Flange, Mounting 30 12433-E 1 Bracket Assy
2 11016 1 Gasket, Mounting
(Mounting)
3 11020-A 1 Body, Assy, Upper 31 11448 4 Screw(8-18x1/4)
4 1491 6 Screw (1/4-20x3/4) 32 12378 1 Clamp, Overload
5 11227 1 Plug, Pipe 33 8221 2 Screw (8-32x1/2)
6 11006 1 Gasket, Shredder 34 13396 1 Box, Terminal Assy
7 12442 1 Assy, Body & Cover
(Incl. code 36)
8 13803
1
Shredder, Stationary 35 12381 1 Screw(8-32x1-1/4)
9 11260
1
Nut 36 12383 1 Grommet, Overload
10 12445
1
Washer 37 13422-BE 1 Overload Protector
11 12142
1
Washer, Fiber 38 12384 1 Bushing
12 13799
1
Assy, Rotor Shredder 39 2466-A 1 Screw, Ground
13 13671 -L
1
Assy, Upper End Bell 40 13709 1 Bearing, Lower
(lncl.Codes14.22) 41 13678 1 Spring, Pre-load
14 12936 1 Shield 42 13710 1 End Frame, Lower
15 1269 6 Screw (8-18x1/2) 43 13676 1 Fan
16 12934-A 1 Assy, Seal 44 13677 1 Ring, Retaining
17 12935 1 Sleeve, Spacer 45 12490 3 Tube, Spacer
18 12860 1 0-Ring 46 12396 1 Cover, Bottom
19 12319 1 Slinger 47 11940-A 3 Bolt, Thru
20 12610 1 Assy, Upper Bearing 48 11757-B 2 Tube, Foot Assy.
21 12326 1 Seal, Water & Oil
(Optional)
22 11322 3 Key, Woodruff
23 13080 1 Kit, Bearing Seal (Incl.
Codes 9-11 &14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw( 1/4-20x1)
26 13592-E 1 Rotor & Shaft Assy.
(Incl. Codes 40)
27 12370 1 Trim Band
28 1836-A 2 Screw (8-32x1/2)
29 13657-J 1 Stator Assy
/