2. In-Sink-Erator
  3. SD-75-3
SD-75-3

In-Sink-Erator SD-75-3 User manual

  • Hello! I am an AI chatbot trained to assist you with the In-Sink-Erator SD-75-3 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PARTS LIST FOR COMMERCIAL DISPOSERS
MODEL SS-75 IN-SINK-ERATOR® 3/4 H.P.
(Includes Models SS-75-1, SS-75-2, SS-75-3)
ORDER BY PART NUMBER, NOT CODE NUMBER
(Minimum Paris Order $3.00)
(All PARTS F.O.B. FACTORY/DEPOT) (INCLUDE SERIAL AND MODEL NUMBER OF DISPOSER WHEN ORDERING)
EFFECTIVE March, 1972
PARTS LIST FOR COMMERCIAL DISPOSERS
MODEL SS-75 IN-SINK-ERATOR 3/4 H.P.
(Includes Models 'SS-75-1, SS-75-2, SS-75-3)
ORDER BY PART NUMBER, NOT CODE NUMBER
(Minimum Parts Order $3.00)
(ALL PARTS F.O.B. FACTORY/DEPOT) (INCLUDE SERIAL AND MODEL NUMBER OF DISPOSER WHEN ORDERING)
Form No. C-123-72C PRINTED IN U.S.A.
Code
No.
Part No.
No.
Reqd.
Description
37 12549-A 1 Stator Assembly
208 Volt, 60 Cycle, Three Phase
38 12352-A 1 Stator Assembly
230/460 Volt, 60 Cycle, Three Phase
39 12433 1 Terminal Box Mounting Bracket •
Single Phase
40 12433-E 1 Terminal Box Mounting Bracket -
Three Phase
41 11448 4 Screw
42 12384 1 Bushing
43 11868 1 Capacitor - Single Phase Only
44 12387 1 Overload Protector
(Use above serial #42555 only)
208 Volt, 60 Cycle. Single Phase
115/230 Volt, 60 Cycle, Single Phase
44 12643 1 Overload Portector.
(Use below serial #42555 only) . :
208 Volt, 60 Cycle, Single Phase :
115/230 Volt, 60 Cycle, Single Phase
45 12616 1 Overload Protector
(Use above serial #42699 only)
208 Volt, 60 Cycle, Three Phase
45 12388 1 Overload Protector
(Use below serial #42699 only)
208 Volt,60 Cycle, Three Phase
46 12388 1 Overload Protector
230/460 Volt, 60 Cycle, Three Phase
47 12378 1 Clamp, Overload
48 5765 2 Screw
49 12372
1
Terminal Box
50 12383
1
Grommet
51 12381
1
Screw
52 12415
1
Bearing - Lower
53 12399
1
Spring, Pre-load
54 12684
1
End Frame, Lower
55 12395
1
Fan
56 12635
1
Retaining Ring
57 12490 3 Tube, Spacer
58 11940 3 Bolt, Thru
59 12396 1 Cover, Bottom
60 12586 2 Plug
61 11757-B 2 Leg (Optional)
62 12564 1 Ground Screw
Code
No.
Part No.
No.
Reqd.
Description
1 11004 1 Mounting Flange
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Container
4 1491 6 Bolt, Mounting
5 11227 1 Pipe Plug
6 11006 1 Seal, Body-Shredder
7 12442 1 Body and Cover Assembly
8 112S2-A 1 Stationary Shredder
9 11260 1 Nut, Shredder
10 12445 1 Washer
11 12142 1 Washer, Fibre
12 12316 1 Rotor Shredder
13 12327 1 Upper End Bell - Includes
Codes 14-16-17-18
14 12321 1 Face Seal
15 12318 1 Spacer Sleeve
16 12319 1 Centrifugal Moisture Shield
17 12610 1 Bearing Assembly - Upper
18 12326 1 Oil and Water Retainer
19 11322 2 Woodruff Key
20 12611
Bearing - Seal Kit Includes
Codes 9-10-11-14-15-16-17-18-19
21 11444 3 Washer
22 1491 3 Bolt
23 1470 1 Washer, Tail Pipe
24 5487 1 Tail Pipe
25 1461 1 Flange - Tail Pipe
26 1468 2 Bolt - Tail Pipe
27 12330-A
Rotor & Shaft Assembly (Includes
Codes 29 & 30)i
208 Volt, 60 Cycle, Single Phase &
115/230 Volt, 60 Cycle, Single Phase
28 12331-A
Rotor & Shaft Assembly
208 Volt, 60 Cycle, Three Phase &
230/460 Volt, 60 Cycle, Three Phase
29 1537 2 Spring - Centrifugal Switch
30 12348 1 Centrifugal Switch
31 7422 2 Screw
32 12393 1 Start Switch
33 5765 2 Screw
34 12370 1 Shell - Trim
35 12351-E 1 Stator Assembly
208 Volt, 60 Cycle, Single Phase '
36 12351-A 1 Stator Assembly
115/230 Volt, 60 Cycle, Single Phase
EMERSON
IN-SINK-ERATOR DIVISION
EMERSON ELECTRIC CO.
4700-21ST STREET
RACINE, WISCONSIN 53406
PHONE: (414) 637-6761
CANADIAN
MODEL
MODEL
SS
-
75
-
10
115/230/60/1
SS
-
75
-
16
ISE
SS
-
75
-
11
208/60/1
SS
-
75
-
17
SS
-
75
-
12
230/460/60/3
SS
-
75
-
18
IN-SINK-ERATOR
SS
-
75
-
13
208/60/3
SS
-
75
-
19
Start with Serial #70,000
ORDER BY PART NUMBER, NOT CODE NUMBER
(All Parts F.O.B. Agency/Depot) (Include Serial and Model Number of Disposer when ordering)
September,
1979
3
/4
H.P.
MODEL
CANADIAN
MODEL
SS-75-10 115/230/60/1 SS-75-16
SS-75-11 208/60/1 SS-75-17
SS-75-12 230/460/60/3 SS-75-18
SS-75-13 208/60/3 SS-75-19
Code
No.
Part No.
No.
Req.
Description
1l 11004 1 Mounting Flange
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Container
4 1491 6 Bolt, Mounting
5 11227 1 Pipe Plug
6 11006 1 Seal, Body-Shredder
7 12442 1 Body and Cover Assembly
8 11252-A 1 Stationary Shredder
9 11260 1 Nut, Shredder ,
10 12445 1 Washer
11 12142 1 Washer, Fibre
12 12944 1 Rotor Shredder
13 13081 1 End Bell Upper, Includes Codes
14 thru 21
14 12936 1 Shield
15 12937 6 Screw
16 12934-A Seal Assembly
17 12935
Sleeve, Spacer
18 12860
O'Ring
19 12319
Centrifugal Moisture Shield
20 12610
Bearing Assembly - Upper
21 12326
Oil and Water Retainer
22 11322 3 Woodruff Key
23 13080 1 Bearing - Seal Kit Includes Codes 9, 10
11, 14, 15, 16, 17, 18, 19, 20, 21, 22
24 11444 3 Washer
25 1491 3 Bolt
26 1470 1 Washer, Tail Pipe
27 5487 1 Tail Pipe
28 1461 1 Flange - Tail Pipe
29 1468 2 Bolt - Tail Pipe
30 12947-A 1 Rotor & Shaft Assembly
Includes Code #31
208 Volt, 60 Hz. Single Phase &
115/230 Volt, 60 Hz, Single Phase
31 12954 1 Centrifugal Switch Assembly
32 12948-A 1 Rotor & Shaft Assembly
208 Volt, 60 Hz, Three Phase
230/460 Volt, 60 Hz, Three Phase
33 7422 2 Screw
34 12393 1 Start Switch
35 12370 1 Shell-Trim
36 13075-C 1 Stator Assembly '
115/230 Volt, 60 Hz, Single Phase
ORDER BY PART NUMBER, NOT CODE NUMBER
(All Parts F.O.B. Agency/Depot) (Include Serial and Model Number of Disposer when ordering)
IN-UNK-ERATOR DIVISION
EMERSON ELECTRIC CO.
4700-21ST STREET
RACINE. WISCONSIN 53406
ISE
PHONE: (414) 554-5432
IN SINK ERATOR®
PRINTED IN U 5 A
Code
No.
Part No.
No.
Req.
Description
37 13075-B 1 Stator Assembly
208 Volt, 60 Hz, Single Phase
38 13077-A 1 Stator Assembly
230/460 Volt, 60 Hz, Three Phase
39 13076-A 1 Stator Assembly
208 Volt, 60 Hz, Three Phase
40 12433 1 Terminal Box Mounting Brocket
Single Phase
41 12433-A 1 Terminal Box Mounting Bracket
Three Phase
42 11448 4 Screw
43 12384 1 Bushing
44 11868 1 Capacitor (Single Phase Only)
45 12387 1 Overload Protector
115/230 Volt, 60 Hz, Single Phase
208 Volt, 60 Hz, Single Phase
46 12388 1 Overload Protector
230/460 Volt, 60 Hz, Three Phase
47 12616 1 Overload Protector
208 Volt, 60 Hz, Three Phase
48 12378 1 Clamp, Overload
49 5765 2 Screw
50 12372 1 Terminal Box
51 12383 1 Grommet
52 12381 1 Screw
53 12415 1 Bearing, Lower
54 12399 1 Spring, Pre-load
55 12684 1 End Frame, Lower
56 12395 1 Fan
57 12635 1 Retaining Ring
58 12490 3 Tube, Spacer
59 11940 3 Bolt, Thru
60 12396 1 Cover, Bottom
61 12564 1 Ground Screw
62 1175 7-8 2 Leg (Optional)
CANADIAN ONLY
63 12643 1 Overload Protector
115/230 Volt, 60 Hz, Single Phase
64 12387 1 Overload Protector
208 Volt, 60 Hz, Single Phase
65 12616 1 Overload Protector
230/460 Volt, 60 Hz, Three Phase
208 Volt, 60 Hz, Three Phase
11005
SPLASH BAFFLE
11249
SLEEVE GUARD
4173
JAM RELEASE BAR
COMMERCIAL DISPOSER
Start Date:
03/04/82
ISE
MODEL NO. SS75
-
15
Engineer Number:
IN-SINK-ERATOR
9230/460V/50Hz/3 Phase
13024K
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket, Mounting
3 11020A 1 Body, Assy, Upper
4 1491 6 Screw, Mounting
5 11227 1 Pipe. Plug
6 11006 1 Gasket, Shredder
7 12442 1 Body & Cover Assy
8 11252A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Shredder Assy, Rotor
13 13081 1 End Bell Assy, Upper
(lnd.Codes14.22)
14 12936 1 Shield
15 1269 6 Screw, Tapping
16 12934A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Woodruff
23 13080 1 Bearing Seal Kit (Incl.
Codes 9-11 & 14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw
26 1470 1 Gasket, Tailpipe
27 5487 1 Tailpipe
28 1461 1 Flange, Tailpipe
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
29
1468
2
Screw, Tailpipe
30 12948B 1 Rotor & Shaft Assy
(Inc). Codes 45)
31 12370 1 Trim, Band
32 1836A 2 Screw
33 13077B 1 Stator Assy
34 12433E 1 Bracket Assy
(Mounting)
35 11448 4 Screw
36 12357 1 Insulation Tube
37 13128P 1 Overload, Protector
38 12378 1 Clamp, Overload
39 5765 2 Screw, Tapping
40 13396 1 Box, Terminal Assy
(Incl. code 42)
41 12381 1 Screw
42 12383 1 Grommet, Overload
43 12384 1 Bushing
44 2466A 1 Screw, Ground
45 12415 1 Bearing, Lower
46 12399 1 Washer, Spring
47 12684 1 End Frame, Lower
48 12395 1 Fan
49 12635 1 Ring, Retaining
50 12490 3 Tube,Spacer
51 12396 1 Cover, Bottom
52 11940A 3 Bolt, Thru
53 11757B 2 Tube Assy, Foot
(Optional)
3/4 H.P.
COMMERCIAL DISPOSER
Start Date:
03/01/82
ISE
MODEL NO. SS75
-
21
Engineer Number:
IN-SINK-ERATOR (308 Volt/50Hz/3 Phase) 13024T
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket, Mounting
3 11020A 1 Body, Assy, Upper
4 1491 6 Screw, Mounting
5 11227 1 Pipe, Plug
6 11006 1 Gasket, Shredder
7 12442 1 Body & Cover Assy
8 11252A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Shredder Assy. Rotor
13 13081 1
End Bell Assy, Upper
(Incl. Codes 14-22)
14 12936 1 Shield
15 1269 6 Screw, Tapping
16 12934A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Woodruff
23 13080 1
Bearing Seal Kit (Incl. codes9-11
& 14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw
26 1470 1 Gasket, Tailpipe
27 5487 1 Tailpipe
28 1461 1 Flange, Tailpipe
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
29
1468
2
Screw, Tailpipe
30 12948B 1 Rotor & Shaft Assy
(Ind. Codes 45)
31 12370 1 Trim, Band
32 1836A 2 Screw
33 13077C 1 Stator Assy
34 12433E 1
Bracket Assy (Mounting)
35 11448 4 Screw
36 12357 1 Insulation Tube
37 13422N 1 Overload, Protector
38 12378 1 Clamp, Overload
39 8221 2 Screw, Tapping
40 13396 1
Box, Terminal Assy
(Ind. code 42)
41 12381 1 Screw
42 12383 1 Grommet, Overload
43 12384 1 Bushing
44 2466A 1 Screw, Ground
45 12415 1 Bearing, Lower
46 12399 1 Washer, Spring
47 12684 1 End Frame, Lower
48 12395 1 Fan
49 12635 1 Ring, Retaining
50 12490 3 Tube, Spacer
51 12396 1 Cover, Bottom
52 11940A 3 Bolt, Thru
53 11757B 2 Tube Assy, Foot
(Optional)
3/4 H. P.
COMMERCIAL DISPOSER
MODEL
ISE
SS-75-23
115/208/230/60/1
IN
-
SINK
-
ERATOR
SS-75-24
208/230/460/60/3
ORDER BY PART NUMBER, NOT CODE NUMBER
(All P»rts F.O.B. Agency/Depot) (Include Serial and Model Number of Disposer when ordering)
May, 1985
3/4
H.P.
COMMERCIAL DISPOSER
Start Date:
MODEL NO. SS75
-
24
7/87
U.S.A.
Engineer Number:
IN-SINK-ERATOR
(208-230/460/60/3Ø)
13384A
3/4 H.P.
CODE NO. PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket Mounting
3 11020-A 1 Body Any, Upper
4 1491 6 Screw, Mounting
5 11227 1 Pipe Plug
6 11006 1 Gasket, Shredder
7 12442 1 Body & Cover Any
8 11252.A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Shredder Assy, Rotor
13 13081 1 End Bell Assy, Upper
(Incl Codes 14 thru 22)
14 12936 1 Shield
15 1269 6 Screw, Tapping
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 1)322 3 Key, Woodruff
23 13080 1
Bearing Seal Kit
(Incl Codes 9-11 & 14 thru 22)
24 11444 3 Washer, Lock
25 3135 3 Screw
26 1470 1 Gasket, Tailpipo
27 5487 1 Tailpipe
28 1461 1 Flange, Tailpipe
29 1468 2 Screw, Tailpipe
CODE
NO.
PART NO. NO. REQ.
DESCRIPTION
30
12948
-
A
1
Rotor & Shaft Assy
31 12370 1 Trim, Band
32 1836-A 2 Screw
33 13077-A 1
Stator Assy (Three Phase)
34 12433-E 1 Bracket, Terminal Box
(Three Phase)
35 11448 4 Screw
36 12384 1 Bushing
37 13422-K 1 Overload, Protector
(Three Phase)
38 12378 1 Clamp. Overload
39 5765 2 Screw, Tapping
40 12372 1 Box, Terminal
41 12381 1 Screw
42 12383 1 Grommet, Overload
43 12415 1 Bearing, Lower
44 12399 1 Washer, Spring
45 12684 1 End Frame, Lower
46 12395 1 Fan
47 12635 1 Ring, Retaining
48 12490 1 Tube, Spacer
49 11940-A 1 Bolt, Thru
50 12396 1 Cover, Bottom
51 2466-A 1 Screw, Ground
52 11757-B 2 Tube Assy, Foot
(Optional)
53 12357 1 Insulation Tube
(Three Phase Only)
COMMERCIAL DISPOSER Start Date:
MODEL NO.SS75
-
25
7/87
CANADIAN Engineer Number:
IN-SINK-ERATOR
(115/208-230/60/1Ø) 13384B
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO.
PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body Assy, Upper
4 1491 6 Screw, Mounting
5 11227 1 Pipe Plug
6 11006 1 Gasket, Shredder
7 12442 1 Body & Cover Assy
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Shredder Assy, Rotor
13 13081 1 End Bell Assy, Upper
(IncI Codes 14 thru 22)
14 12936 1 Shield
15 1269 6 Screw, Tapping
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Woodruff
23 13080 1 Bearing Seal Kit
(IncI Codes 9-11
& 14 thru 22)
24 11444 3 Washer, lock
25 3135 3 Screw
26 1470 1 Gasket, Tailpipe
27 5487 1 Toilpipe
28 1461 1 Flange, Tailpipe
29 1468 2 Screw, Tailpipe
30 12947-A 1 Rotor & Shaft Assy
(Single Phase)
(IncI Codes 31 & 47)
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
31
12954
1
Centrifugal Actuator
(Single Phase Only)
32 8221 2 Screw
33 12393 1 Switch, Start
(Single Phase Only)
34 12370 1 Trim, Band
35 1836-A 2 Screw
36 13075-C 1 Stator Assy
(Single Phase)
37 12433 1 Bracket Assy
(Mounting) (Single Phase)
38 11448 4 Screw
39 12384 1 Bushing
40 11868 1 Capacitor
(Single Phase Only)
41 13422-J1 1 Overload, Protector
(Single Phase)
42 12378 1 Clamp, Overload
43 5765 2 Screw, Tapping
44 12372 1 Box, Terminal
45 12381 1 Screw
46 12383 1 Grommet, Overload
47 12415 1 Bearing, Lower
48 12399 1 Washer, Spring
49 12684 1 End Frame, Lower
50 12395 1 Fan
51 12635 1 Ring, Retaining
52 12490 3 Tube, Spacer
53 11940-A 3 Bolt, Thru
54 12396 1 Cover, Bottom
55 2466-A 1 Screw, Ground
56 11757-B 2 Tube Assy, Foot
(Optional)
COMMERCIAL DISPOSER
Start Date:
09/09/92
MODEL NO. SS75-27
Engineer Number:
IN-SINK-ERATOR
(115/208/230 Volt/60Hz/1 Phase) 13659
3/4 H.P.
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
1
11004
1
Range, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Assy, Upper
4 1491 6 Screw (1/4-20x3/4)
5 11227 1 Plug, Pipe
6 11006 1 Gasket, Shredder
7 12442 1 Assy, Body & Cover
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Assy, Rotor Shredder
13 13722 1 Assy, Upper End Bell
(Incl. Codes 14-22)
14 12936 1 Shield
15 1269 6 Screw (8-18x1/2)
16 12934-A 1 Assy, Seal
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Assy, Upper Bearing
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Woodruff
23 13080 1
Kit, Bearing Seal (Incl. codes 9-11
& 14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 1470 1 Gasket, Tailpipe
27 5487 1 Tailpipe
28 1461 1 Flange, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-A 1 Rotor & Shaft Assy.
(Incl. Codes 31 & 47)
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
1
13708
1
Centrifugal Actuator
32 8221 2 Screw (8-32x1/2)
33 13707 1 Switch, Start
34 12370 1 Trim Band
35 1836-A 2 Screw (8-32x1/2)
36 13713-A 1 Stator Assy
37 12433 1 Bracket Assy
(Mounting)
38 11448 4 Screw (8-18x1/4)
39 12384 1 Bushing
40 11866 1 Capacitor
41 13422J 1 Overload Protector
42 12378 1 Clamp, Overload
43 8221 2 Screw (8-32x1/2)
44 13396 1 Box, Terminal Assy
(Incl. code 46)
45 12381 1 Screw (8-32x1-1/4)
46 12383 1 Grommet, Overload
47 13709 1 Bearing, Lower
48 13678 1 Spring, Pre-load
49 13710 1 End Frame, Lower
50 13676 1 Fan
51 13677 1 Ring, Retaining
52 12490 3 Tube, Spacer
53 11940-A 3 Bolt, Thru
54 12396 1 Cover, Bottom
55 2466-A 1 Screw, Ground
56 11757-B 2 Tube,Foot Assy.
(Optional)
COMMERCIAL DISPOSER
Start Date:
9-1-92
MODEL NO. SS75-28
Engineer Number:
IN-SINK-ERATOR
(208/230-460 Volt/60Hz/3 Phase)
13659-A
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO. PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Assy, Upper
4 1491 6 Screw (1/4-20x3/4)
5 11227 1 Pipe, Plug
6 11006 .1 Gasket, Shredder
7 12442 1 Body & Cover Assy
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Shredder Assy, Rotor
13 13722 1 End Bell Assy, Upper
(Incl. Codes 14 thru 22)
14 12936 1 Shield
15 1269 6 Screw (8-18x1/2)
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Wood luff
23 13080 1 Bearing Seal Kit (Incl.
codes 9-10-11 & 14 thru 22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 1470 1 Gasket, Tailpipe
27 5487 1 Tailpipe
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
28
1461
1
Flange, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-G 1 Rotor & Shaft Assy
(Incl. Code 43)
31 12370 1 Trim.Band
32 1836-A 2 Screw (8-32x1/2)
33 13714-A 1 Stator Assy
34 12433-E 1 Bracket Assy
(Mounting)
35 11448 4 Screw (8-18x1/4)
36 12384 1 Bushing
37 13422-K 1 Overload, Protector
38 12378 1 Clamp, Overload
39 8221 2 Screw (8-32x1/2)
40 13396 1 Box, Terminal
(Ind. code 42)
41 12381 1 Screw (8-32x1-1/4)
42 12383 1 Grommet, Overload
43 13709 1 Bearing, Lower
44 13678 1 Spring, Pre-load
45 13747 1 End Frame, Lower
46 13676 1 Fan
47 13677 1 Ring, Retaining
48 12490 3 Tuba, Spacer
49 11940-A 3 Bolt, Thru
50 12396 1 Cover, Bottom
51 2466-A 1 Screw, Ground
52 11757-B 2 Tube Assy, Foot
(Optional)
3/4 H.P
.
COMMERCIAL DISPOER Start Date:
9-1-92
MODEL NO. SS75-28
Engineer Number:
IN-SINK-ERATOR
(208/230/460 Volt/60Hz/3 Phase) 13659-A
3/4 H.P.
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE NO. PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Assy, Upper
4 1491 6 Screw (1/4-20x3/4)
5 11227 1 Plug, Pipe
6 11006 1 Gasket, Shredder
7 12442 1 Assy, Body & Cover
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Assy, Rotor Shredder
13 13722 1 Assy, Upper End Bell
(lncl.Codes14-22)
14 12936 1 Shield
15 1269 6 Screw (8-18x1/2)
16 12934-A 1 Assy, Seal
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Assy, Upper Bearing
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Woodruff
23 13080 1 Kit, Bearing Seal (Ind.
codes 9-11 & 14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 1470 1 Gasket, Tailpipe
27 5487 1 Tailpipe
28 1461 1 Flange, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-A 1 Rotor & Shaft Assy.
(Incl. Codes 31 & 47)
CODE NO. PART NO. NO. REQ. DESCRIPTION
31
13708
1
Centrifugal Actuator
32 8221 2 Screw (8-32X1/2)
33 13707 1 Switch, Start
34 12370 1 Trim Band
35 1836-A 2 Screw (8-32x1/2)
36 13713-A 1 Stator Assy
37 12433 1 Bracket Assy
(Mounting)
38 11448 4 Screw (8-18X1/4)
39 12384 1 Bushing
40 11868 1 Capacitor
41 13422J 1 Overload Protector
42 12378 1 Clamp, Overload
43 8221 2 Screw (8-32x1/2)
44 13396 1 Box, Terminal Assy
(Incl. code 46)
45 12381 1 Screw (8-32x1-1/4)
46 12383 1 Grommet, Overload
47 13709 1 Bearing, Lower
48 13678 1 Spring, Pre-load
49 13710 1 End Frame, Lower
50 13676 1 Fan
51 13677 1 Ring, Retaining
52 12490 3 Tube, Spacer
53 11940-A 3 Bolt, Thru
54 12396 1 Cover, Bottom
55 2466-A 1 Screw, Ground
56 11757-B 2 Tube, Foot Assy.
(Optional)
COMMERCIAL DISPOSER Start Date:
02/26/93
MODEL NO. SS75-30 (C.S.A.)
Engineer Number:
IN-SINK-ERATOR
(208/230/460 Volt/60Hz/3 Phase) 13569-C
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
1
11004
1
Flange
, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Assy, Upper
4 1491 6 Screw (1/4-20x3/4)
5 11227 1 Pipe, Plug
6 11006 1 Gasket, Shredder
7 12442 1 Body & Cover Assy
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Shredder Assy, Rotor
13 13722 1 End Bell Assy, Upper
(Incl. Codes 14 thru 22)
14 12936 1 Shield
15 1269 6 Screw (8-18x1/2)
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Beahng Assy, Upper
21 12326 1 Seal, Water& Oil
22 11322 3 Key, Woodruff
23 13080 1 Bearing Seal Kit (Incl,
codes 9-10-11 & 14 thru 22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 1470 1 Gasket, Tailpipe
27 5487 1 Tailpipe
3/4 H.P.
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
28
1461
1
Flange, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-G 1 Rotor & Shaft Assy
(Incl. Code 43)
31 12370 1 Trim, Band
32 1836-A 2 Screw (8-32x1/2)
33 13714 -A 1 Stator Assy
34 12433-E 1 Bracket Assy
(Mounting)
35 11448 4 Screw (8-18x1/4)
36 12384 1 Bushing
37 13422-K 1 Overload, Protector
38 12378 1 Clamp, Overload
39 8221 2 Screw (8-32x1/2)
40 13396 1 Box, Terminal
(Incl. code 42)
41 12381 1 Screw (8-32x1-1/4)
42 12383 1 Grommet, Overload
43 13709 1 Bearing, Lower
44 13678 1 Spring, Pre-load
45 13747 1 End Frame, Lower
46 13676 1 Fan
47 13677 1 Ring, Retaining
48 12490 3 Tube, Spacer
49 11940-A 3 Bolt, Thru
50 12396 1 Cover, Bottom
51 2466-A 1 Screw, Ground
52 11757-B 2 Tube Assy, Foot
(Optional)
COMMERICAL DISPOSER Start Date:
04/21/93
MODEL NO. SS75-31(EXPORT)
Engineer Number:
IN-SINK-ERATOR
(115/230Volt/50Hz/1Phase) 13659-D
3/4 H.P.
ORDER BY PART NUMBER. NOT CODE NUMBER
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mount
ing
2
11016
1
Gasket, Mounting
3
11020
-
A
1
Body, Assy, Upper
4
1491
6
Screw
(1/4
-
20x3/4)
5
11227
1
Plug, Pipe
6
11006
1
Gasket, Shredder
7
12442
1
Assy, Body
&
Cover
8
11252
-
A
1
Shredder, Stationary
9
11260
1
Nut
10
12445
1
Washer
11
12142
1
Wash
er. Fiber
12 12944 1 Assy, Rotor Shredder
13
13722
1
Assy, Upper End Bell
(lncl.Codes14.22)
14
12936
1
Shield
15 1269 6 Screw (8-18x1/2)
16
12934
-
A
1
Assy, Seal
17
12935
1
Sleeve, Spacer
18
12860
1
O
-
Ring
19
12319
1
Slinger
20
12610
1
Assy,
Upper Bearing
21
12326
1
Seal. Water
&
Oil
22
11322
3
Key, Woodruff
23
13080
1
Kit, Bearing Seal (Incl.
Codes9
-
11 &14
-
22)
24
11444
3
Washer. Lock
25 3135 3 Screw (1/4-20x1)
26
1470
1
Gasket, Tailpipe
27
5487
1
Tailpipe
28
1461
1
Range, Tail
pipe
29
1468
2
Screw
(1/4
-
20x1/2)
30
13674
-
D
1
Rotor
&
Shaft Assy.
(Incl. Codes 31 & 48)
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
31
1413l
1
Centrifugal Actuator
32 8221 2 Screw (8-32x1/2)
33 13707 1 Switch. Start
34 12370 1 Trim Band
35 1636-A 2 Screw (8-32x1/2)
36 13713-Q 1 Stator Assy
37 12433 1 Bracket Assy
(Mounting)
38 11448 4 Screw (8-18x1/4)
39 11868 1 Capacitor
40 12378 1 Clamp, Overload
41 8221 2 Screw (8-32x1/2)
42 13396 1 Box, Terminal Assy
(Incl. code 46)
43 12381 1 Screw (8-32x1-1/4)
44 12383 1 Grommet, Overload
45 13422-L
1 Overload Protector
46 12384 1 Bushing
47 2466-A 1 Screw, Ground
48 13709 1 Bearing, Lower
49 13678 1 Spring, Pre-load
50 13710 1 End Frame, Lower
51 13676 1 Fan
52 13677 1 Ring, Retaining
53 12490 3 Tube, Spacer
54 11940-A 3 Bolt. Thru
55 12396 1 Cover, Bottom
56 11757-B 2 Tube, Foot Assy.
(Optional)
COMMERCIAL DISPOSER Start Date:
04/21/93
MODEL NO. SS75-32 (EXPORT)
Engineer Number:
IN-SINK-ERATOR
(208/460Volt/50Hz/3Phase) 13659-E
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE
NO.
PART NO.
NO.
REQ.
DESCRIPTION
l
11004
1
Flange, Moun
ting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Assy, Upper
4 1491 6 Screw (1/4-20x3/4)
5 11227 1 Pipe, Mug
6 11006 1 Gasket. Shredder
7 12442 1 Body & Cover Assy
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Shredder Assy, Rotor
13 13722 1 End Bell Assy, Upper
(Incl. Codes 14 thru 22)
14 12936 1 Shield
15 1269 6 Screw (8-18x1/2)
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Woodruff
23 13080 1 Bearing Seal Kit (Incl.
codas 9-10-11 & 14 thru 22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 1470 1 Gasket, Tailpipe
27 5487 1 Tailpipe
CODE
NO.
PART NO.
NO.
REQ.
DESCRIPTION
28
1461
1
Range, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-G 1 Rotor & Shaft Assy
(Incl. Code 44)
31 12370 1 Trim, Band
32 1836-A 2 Screw (8-32x1/2)
33 13714-A 1 Staler Assy
34 12433-E 1 Bracket Assy
(Mounting)
35 11448 4 Screw (8-18x1/4)
36 13422-AG 1 Overload, Protector
37 12378 1 Clamp, Overload
38 8221 2 Screw (8-32x1/2)
39 13396 1 Box, Terminal
(Incl. code 42)
40 12381 1 Screw (8-32x1-1/4)
41 12383 1 Grommet, Overload
42 12384 1 Bushing
43 2466-A 1 Screw, Ground
44 13709 1 Bearing, Lower
45 13678 1 Spring, Pre-load
46 13747 1 End Frame, Lower
47 13676 1 Fan
48 13677 1 Ring, Retaining
49 11940-A 3 Bolt, Thru
50 12490 3 Tube, Spacer
51 12396 1 Cover, Bottom
52 11757-B 2 Tube Assy, Foot
(Optional)
3/4 H.P.
COMMERCIAL DISPOSER Start Date:
04/21/93
MODEL NO. SS75-33 (EXPORT)
Engineer Number:
IN-SINK-ERATOR
(380 Volt/50Hz/3Phase) 13659-G
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
1
11004
1
Range, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Assy, Upper
4 1491 6 Screw (1/4-20x3/4)
5 11227 1 Pipe, Plug
6 11006 1 Gasket. Shredder
7 12442 1 Body & Cover Assy
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 12944 1 Shredder Assy, Rotor
13 13722 1 End Bell Assy, Upper
(Incl. Codes 14 thru 22)
14 12936 1 Shield
15 1269 6 Screw (8-18x1/2)
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Woodruff
23 13080 1 Bearing Seal Kit (Incl.
codes 9-10-11 & 14 thru 22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 1470 1 Gasket, Tailpipe
27 5457 1 Tailpipe
CODE
NO.
PART NO. NO. REQ. DESCRIPTION
20
1461
1
Range, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-G 1 Rotor & Shaft Assy
(Incl. Code 44)
31 12370 1 Trim, Band
32 1836-A 2 Screw (8-32x1/2)
33 13714-B 1 Stator Assy
34 12433-E 1 Bracket Assy
(Mounting)
35 11448 4 Screw (8-18x1/4)
36 13422-N 1 Overload, Protector
37 12378 1 Clamp, Overload
38 8221 2 Screw (8-32x1/2)
39 13396 1 Box, Terminal
(Incl. code 42)
40 12381 1 Screw (8-32x1-1/4)
41 12383 1 Grommet, Overload
42 12384 1 Bushing
43 2466-A 1 Screw, Ground
44 13709 1 Bearing, Lower
45 13678 1 Spring, Pre-load
46 13747 1 End Frame, Lower
47 13676 1 Fan
48 13677 1 Ring, Retaining
49 11940-A 3 Bolt, Thru
50 12490 3 Tube, Spacer
51 12396 1 Cover, Bottom
52 11757-B 2 Tube Assy. Foot
(Optional)
3/4 H.P
.
COMMERCIAL DISPOSER Start Date:
11/01/89
MODEL NO. SD 75
Engineer Number:
IN-SINK-ERATOR
230 Volt/50Hz/1Phase 13531
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
1
12506
-
D
1
No.
5
Mounting Assy
2 11016 1 Gasket, Mounting
3 11020-A 1 Body Assy. Upper
4 1491 6 Screw, Mounting
5 11227 1 Pipe Plug
6 11006 1 Gasket, Shreddder
7 12442 1 Body & Cover Assy
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 13549 1 Shredder Assy, Rotor
13 13081 1 End Bell Assy, Upper
(Inc Codes 14-22)
14 12936 1 Shield
15 1269 6 Screw, Tqpping
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Wooddruff
23 13080 1 Bearing Seal Kit
(Inc Codes 9-11 & 14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw
26 1470 1 Gasket, Tailpipe
27 3851 1 Tailpipe
28 1461 1 Flange, Tailpipe
29 1468 2 Screw, Tailpipe
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
30
13551
-
A
1
Rotor & Shaft Assy
(Incl Codes 31 & 45)
31 12954-A 1 Centrifugal Actuator
32 13556 2 Screw
33 12393 1 Switch, Start
34 1836-A 2 Screw
35 12370 1 Trim, Band
36 13075-P 1 Stator Assy
37
1 Bracket Assy. Mounting
38 11448 4 Screw
39 11868 1 Capacitor
40 12384 1 Bushing
41 2466A 1 Screw, Ground
42 12372 1 Box. Terminal
43 12381 1 Screw
44 13559 1 Grommet
45 12415 1 Bearing, Lower
46 12399 1 Washer, Spring
47 13547 1 End Frame, Lower
48 12395 1 Fan
49 12635 1 Ring, Retaining
50 12490 3 Tube, Spacer
51 12396 1 Cover, Bottom
52
11940
-
A
3
Bolt, Thru
COMMERCIAL DISPOSER Start Date:
11/01/89
MODEL NO. SD 75-1
Engineer Number:
IN-SINK-ERATOR
415 Volt/50Hz/3 Phase 13532 A
CODE NO. PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body Assy, Upper
4 1491 6 Screw, Mounting
5 11227 1 Pipe Plug
6 11006 1 Gasket, Shredder
7 12442 1 Body & Cover Assy
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer, Fiber
12 13549 1 Shredder Assy, Rotor
13 13081 1 End Bell Assy, Upper
(Inc Codes 14-22)
14 12936 1 Shield
15 1269 6 Screw, Tapping
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Slinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal, Water & Oil
22 11322 3 Key, Wooddruff
23 13080 1 Bearing Seal Kit
(Inc Codes 9-11 & 14-22)
24 11444 3 Washer, Lock
25
3135 3 Screw
26 1470 1 Gasket, Tailpipe
27 3851 1 Tailpipe
28 1461 1 Flange. Tailpipe
29 1468 2 Screw, Tailpipe
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
30
12948
-
A
1
Rotor & Shaft Assy
(Incl Codes 42)
31 1836-A 2 Screw
32 12370 1 Trim, Band
33 13077-A 1 Stator Assy
34 12357 1 Insulation, Tubing
35
1 Bracket Assy, Mounting
36 11448 4 Screw
37 12384 1 Bushing
38 2466A 1 Screw, Ground
39 12372 1 Box, Terminal
40 12381 1 Screw
41 13559 1 Grommet
42 12415 1 Bearing, Lower
43 12399 1 Washer, Spring
44 12684 1 End Frame, Lower
45 12395 1 Fan
46 12635 1 Ring, Retaining
47 12490 3 Tube, Spacer
48 12396 1 Cover, Bottom
49
11940
-
A
3
Bolt, Thru
ORDER BY PART NUMBER, NOT CODE NUMBER
COMMERCIAL DISPOSER Start Date:
03/12/93
MODEL NO. SD75-3 (Export)
Engineer Number:
SISSONS
(115/208/230 Volt/50Hz/1Phase) 13711
3/4 H.P.
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Assy, Upper
4 1491 6 Screw (1/4-20x3/4)
5 11227 1 Plug, Pipe
6 11006 1 Gasket, Shredder
7 12442 1 Assy, Body & Cover
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer. Fiber
12 12944 1 Assy, Rotor Shredder
13 13722 1 Assy, Upper End Bell
(Incl. Codes 14-22)
14 12936 1 Shield
15 1269 6 Screw (8-18x1/2)
16 12934-A 1 Assy, Seal
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Stinger
20 12610 1 Assy, Upper Bearing
21 12326 1 Seal. Water & Oil
22 11322 3 Key, Woodruff
23 13080 1 Kit. Bearing Seal (Ind.
codes 9-11 & 14-22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 1470 1 Gasket, Tailpipe
27 5487 1 Tailpipe
28 1461 1 Range, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-D 1 Rotor & Shaft Assy.
(Ind. Codes 31 & 47)
CODE NO. PART NO.
NO.
REQ.
DESCRIPTION
31
13708
1
Centrifugal Actuator
32 8221 2 Screw (8-32x1/2)
33 13707 1 Switch, Start
34 12370 1 Trim Band
35 1836-A 2 Screw (8-32x1/2)
36 13713-G 1 Stator Assy
37 12433 1 Bracket Assy
(Mounting)
38 11448 4 Screw (8-18x1/4)
39 12384 1 Bushing
40 11868 1 Capacitor
41 13422-L 1 Overload Protector
42 12378 1 Clamp, Overload
43 8221 2 Screw (8-32x1/2)
44 13396-D 1 Box, Terminal Assy
(Ind. code 46)
45 12381 1 Screw (8-32x1-1/4)
46 13559 1 Plug, Button
47 13709 1 Bearing, Lower
48 13678 1 Spring, Pre-load
49 13710 1 End Frame, Lower
50 13676 1 Fan
51 13677 1 Ring, Retaining
52 12490 3 Tube, Spacer
53 11940-A 3 Bolt, Thru
54 12396 1 Cover, Bottom
55 2466-B 1 Screw, Ground
56 11757-B 2 Tube, Foot Assy.
(Optional)
COMMERCIAL DISPOSER Start Date:
02/26/93
MODEL NO. SD75-4 (Export)
Engineer Number:
SISSONS
(208/230/460Volt/50Hz/3Phase) 13711-A
ORDER BY PART NUMBER, NOT CODE NUMBER
CODE NO. PART NO. NO. REQ. DESCRIPTION
1
11004
1
Flange, Mounting
2 11016 1 Gasket, Mounting
3 11020-A 1 Body, Assy, Upper
4 1491 6 Screw (1/4-20x3/4)
5 11227 1 Pipe, Plug
6 11006 1 Gasket. Shredder
7 12442 1 Body & Cover Assy
8 11252-A 1 Shredder, Stationary
9 11260 1 Nut
10 12445 1 Washer
11 12142 1 Washer. Fiber
12 12944 1 Shredder Assy, Rotor
13 13722 1 End Bell Assy, Upper
(Incl. Codes 14 thru 22)
14 12936 1 Shield
15 1269 6 Screw (8-18x1/2)
16 12934-A 1 Seal Assy
17 12935 1 Sleeve, Spacer
18 12860 1 O-Ring
19 12319 1 Stinger
20 12610 1 Bearing Assy, Upper
21 12326 1 Seal. Water & Oil
22 11322 3 Key, Woodruff
23 13080 1 Bearing Seal Kit (Incl.
codes 9-10-11&14 thru 22)
24 11444 3 Washer, Lock
25 3135 3 Screw (1/4-20x1)
26 1470 1 Gasket, Tailpipe
27 70076 1 Tailpipe
CODE NO. PART NO. NO. REQ. DESCRIPTION
28
1461
1
Flange, Tailpipe
29 1468 2 Screw (1/4-20x1/2)
30 13674-K 1 Rotor & Shaft Assy
(Incl. Code 43)
31 12370 1 Trim, Band
32 1836-A 2 Screw (8-32x1/2)
33 13714-G 1 StatorAssy
34 12433-A 1 Bracket Assy
(Mounting)
35 11448 4 Screw (8-18x1/4)
36 12384 1 Bushing
37 N/A 1 Overioad, Protector
36 12378 1 Clamp, Overload
39 8221 2 Screw (8-32x1/2)
40 13396-D 1 Box, Terminal
(Incl. code 42)
41 12381 1 Screw (8-32x1-1/4)
42 13559 1 Plug, Button
43 13709 1 Bearing, Lower
44 13678 1 Spring, Pre-load
45 13747 1 End Frame, Lower
46 13676 1 Fan
47 13677 1 Ring, Retaining
48 12490 3 Tube, Spacer
49 11940-A 3 Bolt, Thru
50 12396 1 Cover, Bottom
51 2466-A 1 Screw, Ground
52 11757-B 2 Tube Assy, Foot
(Optional)
3/4 H.P.
/