2
Installation
Remove the plastic tape from the battery slot to
begin using the RC4.
RC4
Quick Start Guide
Getting Started
Replacing the Battery
17.Jan
1
Center Button
Battery Slot
(-) Button
(+) Button
Multifunction
Button
200
220
180
160
140
120
100
80
60
40
20
1
240
260
Note:
If your handlebar requires better grip for holding
the RC4 in place, apply the rubber band around
the handlebar.
Button Operation
Press for 1 sec
1”
Tapping
Tap
Double Tapping
Tap
Battery Check
70 ~ 100%
30 ~ 70%
0 ~ 30%
Power On
LED
Bluetooth Pairing
8”
Press
(+) Button
Remote Control Pairing
Headset
Pairing
Note:
• You can control the headset using the RC4 only
after you pair them together.
• The RC4 supports Sena headsets with Bluetooth
4.1 or higher.
Factory Reset
1”
Press
(-) Button
(+) Button
+ +
Center
Button
Headset Control
To control your headset using the RC4, please refer to the
Quick Reference Guide for button operations on functions
such as phone, music, and intercom.
Sena Technologies, Inc.
www.sena.com
Customer Support
: support.sena.com
E-mail
3
Power On/Off
Tap
Power On
Center
Button
Deep Sleep
1”
Press
(+) Button
+
Center
Button
Note:
The Multifunction Button remotely controls special
buttons such as the Ambient Mode Button of the
20S and the Camera Button of the 10C. Please refer
to the Quick Reference Guide for more details.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI