402021-0

Kohler 402021-0 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Kohler 402021-0 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation Guide
Commercial Toilet
K-4323, K-4325, K-4329,
K-4330, K-4450, K-4460,
K-4475
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page “Français-1”
Español, página “Español-1”
1009797-2-D
Tools and Materials
Thank You For Choosing Kohler Company
Thank you for choosing Kohler Company. Your Kohler Company
product reflects the true passion for design, craftsmanship, artistry, and
innovation Kohler Company stands for. We are confident its
dependability and beauty will surpass your highest expectations,
satisfying you for years to come.
All the information in this guide is based upon the latest product
information available at the time of publication. At Kohler Company,
we strive to fulfill our mission of improving the level of gracious living
for each person who is touched by our products and services. We
reserve the right to make changes in product characteristics, packaging,
or availability at any time without notice.
Please take a few minutes to review this guide. If you encounter any
installation or performance problems, please call 1-800-4KOHLER
(1-800-456-4537) from within the USA and Canada, or 001-877-680-1310
from within Mexico.
Before You Begin
CAUTION: Risk of product damage. Handle with care.
Vitreous china can break or chip if the bolts and nuts are
overtightened, or if the product is handled carelessly.
IMPORTANT! Record the model number (from the label on the box)
in the Homeowners Guide for reference.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for damage.
Spud Wrench 10" Adjustable WrenchSafety Glasses
Gasket SpongeTape MeasurePutty Knife
1009797-2-D 2 Kohler Co.
Before You Begin (cont.)
If the flush valve is not installed, refer to the manufacturer’s
instructions before installing.
Kohler reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Kohler Co. 3 1009797-2-D
1. Installation
CAUTION: Risk of hazardous gases. If the new toilet is not
installed immediately, temporarily place a rag in the closet
flange.
Remove the Existing Bowl
Turn off the water supply.
Flush the toilet.
Sponge out all remaining water from the tank.
Disconnect the flush valve.
Remove the caps, washers, fiber washers, toilet and gasket from
the closet flange.
Install the New Bowl
Install the carrier per the manufacturer’s instructions.
Mount the toilet per the carrier manufacturer’s instructions.
Apply the gasket to the toilet outlet. Refer to the gasket
manufacturer’s instructions for installation.
NOTE: All-wax gaskets are not appropriate for this installation.
Install the flush valve. Refer to the flush valve manufacturer’s
instructions.
Cap
Washer
Fiber Washer
Toilet
Carrier Stud
Bearing Nut
Outlet Coupling
Gasket
Toilet Outlet
Bearing Washer
1009797-2-D 4 Kohler Co.
2. Checkout Installation
Flush the toilet several times and check all connections for leaks.
Periodically check for leaks for several days following the
installation.
For bowls with seats, use the seat attachment hardware and
instructions packed with the toilet seat.
Kohler Co. 5 1009797-2-D
/