MEN220 with Crossover Connection Diagram
2A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. 04116600
Power Amplifier 1 (Partial View, Righ Channel, Low Frequencies)
Power Amplifier 2 (Partial View, Left Channel, Low Frequencies)
Loudspeaker (Partial View, Right Channel) Loudspeaker (Partial View, Left Channel)
Power Amplifier 3 (Partial View, Both Channels, High Frequencies )
Note: Refer to the MEN220 Owner’s
Manual page 11 for additional
connection information.
Connection Legend:
Data Cable*-
Sensor/Keypad Cable -
Power Control Cable* -
Audio Signal Cable -
Video Signal Cable -
RF Signal Cable -
Digital Signal Cable -
RS232 Cable -
Ground Wire -
AC Power Cords -
Loudspeaker Cable -
* 2 conductor shielded with 1/8 inch
stereo mini phone plug on each end.
Preamplifier
Controller (Preamplifier)
Connect to
AC Outlet
IR Sensor
-
+
-
+
Refer to pages
11, 19 and 20
in the MEN220
Owner’s Manual
for additional
information
-
+
Refer to pages
11, 19 and 20
in the MEN220
Owner’s Manual
for additional
information
-
+
