Swis­sonic MidiConnect 2 Quick start guide

Category
Musical Equipment
Type
Quick start guide

Swis­sonic MidiConnect 2 is a robust and flexible device that allows you to connect your MIDI devices to your computer. It features two MIDI plugs that can be used as input or output, providing you with a total of four MIDI ports. The device connects to your computer via a USB 3.0, 2.0, or 1.1 port, and it is powered via USB, so you don't need to worry about an external power supply.

The Swis­sonic MidiConnect 2 is compatible with Windows XP, Vista, 7, 8.1, 10, and Mac OS X (32- and 64-bit), and it requires no drivers, so you can plug it in and start using it right away.

Swis­sonic MidiConnect 2 is a robust and flexible device that allows you to connect your MIDI devices to your computer. It features two MIDI plugs that can be used as input or output, providing you with a total of four MIDI ports. The device connects to your computer via a USB 3.0, 2.0, or 1.1 port, and it is powered via USB, so you don't need to worry about an external power supply.

The Swis­sonic MidiConnect 2 is compatible with Windows XP, Vista, 7, 8.1, 10, and Mac OS X (32- and 64-bit), and it requires no drivers, so you can plug it in and start using it right away.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • inf[email protected] DocID: 442483_19.09.2018
EN
User manual
This manual contains important information on the safe operation of the product.
Read and follow the safety advice and instructions given. Retain the manual for future
reference. If you pass the product on to others please include this manual.
MidiConnect 2
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected for recy-
cling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your local waste
disposal facility.
Safety instructions
Intended use
This product is meant to be used as a Midi to USB interface cable. Any other use or
use under other operating conditions is considered to be improper and may result in
personal injury or property damage. No liability will be assumed for damages result-
ing from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke!
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or ammable cleaning agents.
Features
• MIDI plugs can be used as input or output
• Fast connection to USB 3.0, 2.0 or 1.1 port of PC or Mac
• Power supply via USB, no power supply needed
• No drivers needed on Windows XP / Vista / 7 / 8.1 / 10 and Mac OS X
(32- and 64-bit)
Connections
1. MIDI plugs
2. USB plug
Using the product
1. Connect the MIDI plugs to the inputs / outputs of the desired device. In this case,
input or output are detected automatically. Connect the USB plug to the USB
port of your Wintel or Mac computer. The higher the USB version, the better the
performance. The device requires no drivers and is ready for immediate use.
2. In Windows, start your MIDI application (for example, sequencer or music nota-
tion application) and check the entries there for the MIDI devices. For Mac OS X,
start Audio MIDI Conguration. The device appears there as a MIDI device with 2
input / output ports.
3. Each MIDI port on the device corresponds to a MIDI port, for each input / output
in your MIDI application.
Technical specications
Supported USB versions 3.0, 2.0 or 1.1
Power supply via USB
Length approx. 1.8m
Colour Black
  • Page 1 1

Swis­sonic MidiConnect 2 Quick start guide

Category
Musical Equipment
Type
Quick start guide

Swis­sonic MidiConnect 2 is a robust and flexible device that allows you to connect your MIDI devices to your computer. It features two MIDI plugs that can be used as input or output, providing you with a total of four MIDI ports. The device connects to your computer via a USB 3.0, 2.0, or 1.1 port, and it is powered via USB, so you don't need to worry about an external power supply.

The Swis­sonic MidiConnect 2 is compatible with Windows XP, Vista, 7, 8.1, 10, and Mac OS X (32- and 64-bit), and it requires no drivers, so you can plug it in and start using it right away.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI