De Dietrich DTI1048C Owner's manual

Category
Hobs
Type
Owner's manual

This manual is also suitable for

The De Dietrich DTI1048C induction hob offers precise temperature control and rapid heating for your cooking needs. It features four cooking zones with power ranging from 50W to 4600W, allowing you to adjust the heat intensity to suit different cooking techniques. The hob's intuitive touch controls and digital display make it easy to select cooking zones, adjust power levels, and set timers.

The De Dietrich DTI1048C induction hob offers precise temperature control and rapid heating for your cooking needs. It features four cooking zones with power ranging from 50W to 4600W, allowing you to adjust the heat intensity to suit different cooking techniques. The hob's intuitive touch controls and digital display make it easy to select cooking zones, adjust power levels, and set timers.

2
Dear Customer,
When you discover De Dietrich products you experience the same feelings that only
objects of value can arouse.
You are immediately attracted as soon as you see them. The quality of the design is
illustrated by its timelessness, degree of refinement and elegance, and high standard
of finish resulting in perfect harmony between different appliances.
Then comes the irresistible urge to touch. De Dietrich design makes the most of stur-
dy and noble materials; priority is given to authenticity.
By combining the most advanced technologies with top-quality materials, De Dietrich
produces products manufactured to the highest standard for the benefit of all those
who love cooking.
We hope you are extremely satisfied with this new appliance and will be happy to
receive your suggestions and to answer your questions. Please send them to our cus-
tomer service department or use our Internet site.
We invite you to register your product at www.de-dietrich.com
to take advantage of all
the benefits the brand has to offer.
Thanking you for your confidence.
De Dietrich
Find further details on the brand at www.de-dietrich.com
Visit La Galerie De Dietrich, 6 rue de la Pépinière in Paris
Open Tuesday to Saturday 10 a.m. to 7 p.m.
De Dietrich Customer Service 0892 02 88 04
EN
3
CONTENTS
Safety Instructions 04
1 /INSTALLING YOUR APPLIANCE
• Choice of location ____________________________________________________ 4
• Fitting ______________________________________________________________ 4
• Connection __________________________________________________________ 5
2 / USING YOUR APPLIANCE
• The induction principle ________________________________________________ 6
• Description of the top__________________________________________________ 7
• Presentation of the display _____________________________________________ 10
• Presentation of the function touch control_________________________________ 10
• Description of che controls _____________________________________________ 12
Turning on
Stop
Adjusting the power level
Setting the timers
Total
Setting the timers
Independent timer
Elapsed time
Boil
Locking
Clean lock
• Safety during operation _______________________________________________ 17
3 / MAINTAINING YOUR APPLIANCE ___________________________________________ 18
4 / SPECIAL MESSAGES, TROUBLESHOOTING __________________________________ 19
5 / AFTER-SALES SERVICE AND CUSTOMER RELATIONS ________________________ 20
As part of our commitment to constantly improving our products, we reserve the right to
make changes to them based on technical advances to their technical, functional and/or aes-
thetic properties.
Warning
Before installing and using your appliance, please carefully read this Guide to
Installation and Use, which will allow you to quickly familiarise yourself with its operation.
EN
4
1/ INSTALLING YOUR APPLIANCE
Tip
If your hob is located above your oven, the its thermal safety devices can impede the
simultaneous use of the hob and the oven pyrolysis programs.
The hob is equipped with a safety system to prevent overheating.
This safety device can be activated, for example, when the hob is installed above an oven that is
not sufficiently insulated. In such circumstances we recommend that you increase the hob’s venti-
lation by creating an opening in the side of the cabinet,
(8 x 5 cm), and/or also installing an oven insulation kit available from our after-sales department
(Ref. 75X1652).
You can also install your hob above a dishwasher. In that case, your worktop must be at least
900mm high in order to ensure the proper ventilation of your hob and you could also fit the dish-
washer insulation kit that is available from the after-sales Service (Ref. 77X7781).
CHOICE OF LOCATION
The distance between the edge of your appli-
ance and the side and rear walls (or partitions)
must be at least four centimetres (zone A).
Your appliance may be recessed without any
restriction. Check, however, that the air inlets
and outlets are free of obstruction.
The recessing method opposite is recom-
mended for use above an oven or built-in appli-
ance.
RECESSING
Follow the diagram above.
Glue the foam seal underneath the appliance,
following the perimeter of the hole in the work-
top upon which the appliance will rest. This will
ensure a good seal against the worktop.
Secure the clips to the hob
(depending on the
model).
4 cm
4 cm
4 cm
Entrée d'air
Sortie d'air
4 cm
A
ventilation space
W
L
W’
L’
6.4
Abo
ve an oven
MIN 4 mm
Above a cabinet
with a door or drawer
Dimensions depending on your model
EN
5
1/ INSTALLING YOUR APPLIANCE
Warning
If the cable is damaged it must be replaced by the manufacturer, its after-sales serv-
ice or a similarly qualified person .
This hob must be connected to the mains via an accessible socket complying with publication
IEC 60083 or an all-pole circuit-breaker device complying with current installation rules.
When power is first supplied to your hob, or after an extended power cut, an indicator light will
be displayed on the control panel. This information will disappear after 30 seconds.
CONNECTION
220-240V
~
N
L
Green/yellow
Blue
Brown
32A
Earth
Neutral
Phase
Separate the two phase wires (L1 and L2)
before connection.
Neutral
Earth
Phase
N
L1
L2
Blue
Green/yellow
Black-grey
Brown
With hook-up of 400 V 2N three phase, verify
that the neutral wire is properly connected.
400V 2N
~
-
16A
Separate the wires before connection.
Neutral
Earth
Phase
N1
L1
L2
Blue
Green/yellow
Black-grey
Brown
Hook-up of 2x230V 2L+2N
~
-
16A
N2
N
L
Green/yellow
Blue
Black-grey
Brown
220-240V
~
32A
Earth
Neutral
Phase
400V 3
~
-
16A
EN
6
2 / USING YOUR APPLIANCE
• The induction principle
The principle of induction is based on a mag-
netic phenomenon.
When you place cookware on a cooking zone
and turn the appliance on, the electronic cir-
cuits in the hob produce “induced” currents
in the bottom of the cookware which instant-
ly raise its temperature. This heat is then
transmitted to the food.
We have designed this cooking hob for use by private individuals in their homes.
This hob is intended exclusively for cooking beverages and foodstuffs and does not contain any
asbestos-based materials.
This appliance is not intended for use by persons (including children) with impaired physical, sen-
sory or mental capacities, or by inexperienced or untrained persons, except if they have been in-
structed in its operation by a person responsible for their safety. Children should be watched to
ensure that they do not play with the appliance.
+
-
C
B
A
• Cookware
Most cookware is compatible with induction.
To verify that your cookware is suitable, place
it on a heating area (16 or 23 cm) on power 4.
- If the display remains on, your cookware is
compatible.
- If the display flashes, your cookware cannot
be used for induction cooking.
You can also use a magnet to test the cook-
ware.
If a magnet “sticks” to the bottom of the cook-
ware, it is compatible with induction.
Only glass, terracotta, aluminium without a
special finish on the bottom, copper and
some non-magnetic stainless steels do not
work with induction cooking. We recommend
that you select cookware with a thick, flat bot-
tom.
When you buy your cookware, make sure that
this logo is on the package; it assures you
that it is compatible with induction
cooking.When choosing cookware with this
A - Induction plate
B - Electronic circuit
C - Induced currents
•Choosing a cooking zone
Cooking Diameter of bottom of pot
zone*
16 cm 10 ..... 18 cm
21 cm 18 ..... 24 cm
23 cm 12...... 26 cm
28 cm 12 ..... 32 cm
Continuum
top or bottom 12......20cm
Continuum 18....oval, long fish dish
full
EN
7
2 / USING YOUR APPLIANCE
Description of the top
00344
Overall dimensions (L x l): 65 x 52
Cut-out Recess (L’ x l’): 56 x 49
16 cm
50 W - 2200 W
21 cm
50 W - 3100 W
Selector touch controls
Use these touch controls to select, turn on
and turn off the cooking zones. When a zone
is selected, you will see it light up, and you
can adjust its settings.
A zone 21 cm.
B zone 16 cm.
C zone 28 cm.
Adjustment touch controls
These touch controls allow you to adjust power,
timer, programmer... for each of the selected
zones.
D Power and timer adjustment
E Power preselection
I Confirm
J Function selection
K Timer - independent timer
L Locking - unlocking - Clean lock
DTI1118C
A
C
E
D
I
B
28 cm
50 W - 4600 W
J
K
L
D
E
EN
8
Selector touch controls
Use these touch controls to select, turn on
and turn off the cooking zones. When a zone
is selected, you will see it light up, and you
can adjust its settings.
A Complete
CONTINUUM zone
B Bottom C
ONTINUUM zone
C Top C
ONTINUUM zone
D 16 cm zone.
E 21 cm zone.
Adjustment touch controls
These touch controls allow you to adjust
power, timer, programmer... for each of the
selected zones.
F Power and timer adjustment
G Power preselection
H Confirm
I Function selection
J Timer - independent timer
K Locking - unlocking - Clean lock
2 / USING YOUR APPLIANCE
A
G
F
K
E
B
J
C
H
8
00342
Overall dimensions (L x l): 65 x 52
Cut-out Recess (L’ x l’): 56 x 49
DTI1048C
50 W - 4600 W
21 cm
50 W - 3100 W
16 cm
50 W - 2200 W
D
I J
F
G
EN
9
2 / USING YOUR APPLIANCE
00343
Overall dimensions (L x l): 79 x 52
Cut-out Recess (L’ x l’): 75 x 49
DTI1168CE
J
K
C
A
G
Selector touch controls
Use these touch controls to select, turn on
and turn off the cooking zones. When a zone
is selected, you will see it light up, and you
can adjust its settings.
A Complete left
CONTINUUM zone
B Bottom left
CONTINUUM zone
C Top left
CONTINUUM zone
D Complete right
CONTINUUM zone
E Bottom right
CONTINUUM zone
F Top right
CONTINUUM zone
Adjustment touch controls
These touch controls allow you to adjust
power, timer, programmer... for each of the
selected zones.
G Power and timer adjustment
H Power preselection
I Confirm
J Function selection
K Timer - independent timer
L Locking - unlocking - Clean lock
I
B
H
50 W - 3600 W
50 W - 3600 W
D
E
G
H
L
EN
10
PRESENTATION OF THE DISPLAY
A
B
Rear left cooking zone or Continuum display
Function indicator
Rear right cooking zone or Continuum display
Front right cooking zone or Continuum display
Control panel lock indicator (child safety device).
Clock display
Independent timer display
Front left cooking zone or Continuum display
C
D
E
F
G
PRESENTATION OF THE FUNCTION TOUCH CONTROLS
A
B
C
D
E
F
Elapsed time
Boil
Total
Independent timer
Reset time
Language
H
A
B
C
D
E
F
A
B
C
D
E
F
GH
2 / USING YOUR APPLIANCE
EN
11
2 / USING YOUR APPLIANCE
How to set the time:
- When power is turned on
The displays flashes 12:00.
Set the time by pressing the + or – touch con-
trols on any of the cooking zones (holding
your finger on the touch control allows you to
scroll through the numbers rapidly).
Example: 12:30
Confirm.
The display stops flashing.
How to adjust the time:
- To reset the time on the clock
Press the touch control until the indi-
cator starts to flash .
A beep indicates that the time may now be
set.
Adjust the time with the + and – touch con-
trols on any of the cooking zones.
Confirm.
1
2
1
2
How select the language:
French is the default language displayed.
If you wish to select another language, press
the touch control until the indicator
flashes.
Select one of the languages proposed:
English OK
Français OK
Español OK
Português OK
Deutsch OK
Polski OK
 OK
Confirm.
1
2
Text is shown on the display to guide you as you program your settings.
Note: To confirm your selection:
- press the
OK
touch control or wait a few seconds when confirmation will take place automati-
cally.
EN
12
2 / USING YOUR APPLIANCE
TURNING ON
Press the start/stop touch control for the
zone you want to use. A flashing “0” on the
display of the cooking zone selected and a
beep indicate that the zone is on. You can
then set the power level required using the “–”
or “+” touch controls for the cooking zone
selected.
If you do not select a power level, the cooking
zone will automatically shut off after a few
seconds.
STOP
Press the on/off touch control for the cooking
zone selected or reduce the power to zero
using the “” touch control.
ADJUSTING THE POWER LEVEL
Press the power – or + touch controls.
When you turn on a cooking zone you can
move directly to the power preset settings
“bo”, 10 and 6 by pressing the touch con-
trol repeatedly.
Adjusting the power preset settings
This function allows you to modify the power
levels defined in the preset settings (except
for the BOOST).
- Your cooking zone must be turned off.
- Keep your finger on the touch control.
- 6 and “low – +” are displayed in the text box.
Adjust the new power setting by pressing on
the or + touch controls. Confirm with OK.
Then 10 and “high - +” are displayed in the text
box. Adjust and confirm by pressing OK.
N.B.: The preset setting power levels are iden-
tical for all the cooking zones:
- press once for 1 and 7
- press twice for 8 and 12.
DESCRIPTION OF THE CONTROL
S
Start/stop touch control.
Power or timer touch controls
Preset power level setting touch controls
A
B
C
A
B
C
1
2
1
2
3
Tip
The zone on the display may go red while the cooking hob is being used. This does not
affect operation of the appliance in any way. The display returns to its normal appearance when
it is no longer in use.
EN
13
2 / USING YOUR APPLIANCE
TOTAL
This function allows you to program a
sequence of 2 different power levels and heat-
ing times, for example programming a func-
tion to seal the food followed by a second to
allow it to simmer.
If you want to access this function, press the
touch control jusqu’à faire clignoter l’indi-
cateur .
- Confirm your selection by pressing OK.
A beep indicates that it is now possible to
program the settings.
-
Select the cooking zone concerned by
pressing .
- Adjust the first power level with the – +
touch controls, then confirm by pressing OK.
- Select the cooking time for the first power
level with the – + touch controls, then confirm
by pressing OK.
- Select the second power level with the – +
touch controls, then confirm by pressing OK.
- Adjust the second power level with the - +
touch controls, then confirm by pressing OK.
When the last setting has been validated by
pressing OK, cooking starts using these
recorded settings. A beep sounds to indicate
that cooking is finished.
N.B.: This function can only be used on one
zone at a time.
Total function
Total function
Choose zone
Choose zone
Choose Power 1
Choose Power 1
-/+ OK
-/+ OK
Duration 1?
Duration 1?
-/+ OK
-/+ OK
Choose Power 2
Choose Power 2
-/+ OK
-/+ OK
Duration 2?
Duration 2?
-/+ OK
-/+ OK
Tip
If you are using several receptacles on the hob at the same time, try to use cooking
zones located on opposite sides. When you are working on one side of the hob, using the
booster on one of the cooking zones automatically limits the power on the other zone visi-
ble on the display. This automatic limit also occurs when the pre-heating function is used.
Warning
If you change the settings on a sequence while it is running, the function is automatically can-
celled.
EN
14
2 / USING YOUR APPLIANCE
SETTING THE TIMERS
Each cooking zone has its own timer. It can be
set as soon as you start cooking.
To turn on or modify the timer, press the
touch control briefly.
0.00 flashes in the last cooking zone selected.
To select the cooking zone desired:
- Press successively on the touch control
until the desired zone is displayed.
0.00 flashes in the desired zone:
- Press on the or + touch control for the
zone in question to adjust the time desired
(from 0:01 to 9:59)
When cooking is finished, 0:00 is displayed
and a beep sounds. To cancel this informa-
tion, press any touch control for the particular
cooking zone being used. Otherwise, the
information will disappear after a few
moments.
To stop the timer manually, press simultane-
ously on “
” and “+
INDEPENDENT TIMER
To access this function, hold down the
touch control.
0 appears on the display and the hourglass
flashes. Press the or + touch controls for
any one of the cooking zones. You can adjust
your independent timer between 01 and
99 minutes.
EN
15
2 / USING YOUR APPLIANCE
ELAPSED TIME
This function displays the time elapsed since
the last power setting adjustment was made
on all of the zones that are in use.
To use this function, press and hold the
touch control until the indicator flashes.
The time elapsed appears in the display.
Note: If a time is displayed on the timer, this
time cannot be modified until 5 seconds later.
After these 5 seconds have elapsed, you can
modify your cooking time.
BOIL
This function allows you to boil water and to
maintain it at its boiling point if you wish to
cook pasta, for example.
Press the touch control until the indi-
cator
starts to flash.
- Confirm
by pressing OK.
- The indicator
remains displayed, with-
out flashing. A beep is emitted.
- Select the desired zone by pressing on
.
- Press the –/+ touch control to indicate the
amount of water (from 0.5 to 6 litres).
- Confirm by pressing OK. Cooking starts.
A beep is emitted when the water begins to
boil.
- Add the pasta.
- Confirm by pressing OK then indicate the
cooking time using your timer.
A beep sounds to indicate that cooking is fin-
ished.
NB: It is important that the water tempera-
ture is neither too hot nor too cold when
cooking begins otherwise the final result will
be affected.
Do not use cast iron cookware.
This function can only be used on one zone
at a time.
You can use this function to cook any other
food that is cooked in boiling water.
Elapsed time
Elapsed time
OK
OK
Boil function
Boil function
OK
OK
Choose zone
Water quantity
Water quantity
0,5 l -/+ OK
0,5 l -/+ OK
Boiling process
Boiling process
Confirm you
Confirm you
put pasta OK
put pasta OK
EN
16
2 / USING YOUR APPLIANCE
To lock:
Press the touch control until the indi-
cator flashes in the display.
A beep will confirm your action.
Press once and hold the
touch control until
the padlock appears in the display.
To unlock:
Press once and hold the
touch control until
the padlock disappears from the display.
CLEAN LOCK
This function allows you to temporarily lock
your hob while cleaning.
To activate Clean Lock:
- Your cooking hob must be turned off.
- Briefly press the touch control. A beep
sounds.
- After a preset time, the lock will automatical-
ly disengage. A double beep is emitted.
LOCKING
This function allows you to lock the control panel when it is turned off (for cleaning for example)
or during cooking (to ensure that your settings are not changed).
For safety reasons, only the “stop” touch controls are always active allowing the heating zone to
be turned off even if locked.
Clean lock on
Clean lock on
Lock on
Lock on
EN
17
2 / USING YOUR APPLIANCE
Safety during operation
• Residual heat
After a long period of cooking, the zone used
can remain hot for several minutes. An ‘’H’’
flashes during this period. Do not put your
hand on the zone.
• Temperature limiter
Each cooking zone is equipped with a safety
sensor that constantly monitors the tempera-
ture of the bottom of the cookware. If you
leave empty cookware on a zone which is
turned on, the power will be automatically
limited to prevent damage to the cookware or
hob.
• Protection against spills
In case of overflow, or of a metallic object or
wet cloth placed on the control buttons, the
hob turns itself off, the displays light up and
a beep sounds. Clean the hob or remove the
object, then begin cooking again.
•Auto-Stop system
Should you forget that cooking is in progress,
this safety function will automatically turn the
hob off after a predefined time (between 1
and 10 hours depending on the power set-
ting). “AS” is displayed and a beep sounds for
about 2 minutes. Press on the main selector
touch control to delete this information. A
beep will confirm your setting.
• “Small Items” safety
If you place a small object on the area (a ring,
a fork, etc), the hob will detect it and not deliv-
er any power. The power display flashes.
N.B.:
However, several small objects at the same
time on a zone could be identified as cook-
ware. In that case, power will be delivered by
the hob.
It is recommended that you avoid
placing metal objects such as knives,
forks, spoons and lids on the cooking sur-
face, as they may become hot.
•For users with heart pacemakers and active implants.
The hob’s operation conforms to current electromagnetic interference standards and so com-
plies fully with legal requirements (89/336/EEC directives).
In order to avoid interference between your cooking hob and a pacemaker, your pacemaker
must be designed and programmed in compliance with the regulations that apply to it.
Since we can only guarantee the compliance of our own products, we strongly recommend that
you refer to the manufacturer of your device or to your doctor, to avoid any possible incompati-
bility.
As indicated by this logo, the materials used to package this appliance can be recy-
cled. Please recycle the packaging and help protect the environment by placing it
in the recycling bins provided by your local council.
The manufacturer will arrange for the appliance to be recycled properly, in accor-
dance with European directive 2002/96/EC on Waste Electrical and Electronic
Equipment. Contact your local authority or retailer for details of collection points for
old appliances.
EN
18
3 / MAINTAINING YOUR APPLIANCE
Caring for your appliance:
The vitroceramic glass surface is highly
resistant, but not unbreakable. Here are some
recommendations for increasing its life:
- Avoid impacts and friction from cookware.
- Avoid putting a hot lid down flat on the hob.
A “suction” effect could damage the vitroce-
ramic surface.
- Do not use cookware with bottoms that are
rough or dented.
- Do not use your cooking hob as a work sur-
face.
- Never use paper or an aluminium tray for
cooking. The aluminium would melt and
damage the top.
- Never use a steam cleaner to clean your hob.
- Never directly heat a tin can. It could
explode.
Entretenir votre appareil
Aesthetic faults, resulting from mistreatment
of your hob and which do not result in a loss
of function, are not covered by the guarantee.
And for the safety of your kitchen, do not
place cleaning items or inflammable
objects/products in the cabinet below your
cooking hob.
TYPES OF STAINS/SPOTS
Light.
Accumulation of baked-on
stains/dirt.
Sugar spills, melted plas-
tics.
Rings and hard water
residue.
Shiny metallic streaks.
Weekly maintenance.
WHAT TO DO
Thoroughly moisten the zone to be
cleaned with hot water, then wipe off.
Thoroughly moisten the zone to be
cleaned with hot water. Use a special glass
scraper to remove large items, then use
the coarse side of a household sponge and
finally wipe off.
Apply warm white vinegar to the stain, let
stand, then wipe with a soft cloth.
Apply a cleaning agent for vitroceramic
glass (preferable one with silicone for its
protective properties) to the surface.
USE
Cleaning sponges
Cleaning sponges
Scraper for glass.
White vinegar.
Cleaning agent
for vitroceramic
glass.
cream
cleaning sponge
special sponge for delicate crockery
Scouring sponge
Powder
EN
19
4 / SPECIAL MESSAGES, TROUBLESHOOTING
The hob does not operate and
the indicator lights on the control
panel do not light up.
The hob is not working and
another message is displayed.
The hob does not function,
the
information is displayed.
The appliance is not receiving
electricity. The power source or
connection is defective.
The electronic board is func-
tioning poorly.
The hob is locked
Inspect the electrical cir-
cuit breaker and fuses.
Call the Customer
Service Department.
See chapter on using the
child safety system
• When powering up
YOU NOTICE THAT: POSSIBLE CAUSES: WHAT YOU SHOULD DO:
• During initial use
The hob has stopped operating,
is beeping approximately every
10 seconds and a or F7 is
displayed.
A series of small or F7 is
displayed.
After turning on a cooking zone,
the indicator lights on the con-
trol panel continue to flash.
The saucepans make noise dur-
ing cooking.
Your hob makes a clicking
sound during cooking.
The fan continues to function a
few minutes after your hob is
turned off.
After turning on a heating zone,
the indicator lights on the con-
trol panel remain steady but the
cookware is not heated.
There was an overflow or an
object is in contact with the
control panel.
The electronic boards have
heated up.
The cookware used is not suit-
able for induction or is less
than 12 cm in diameter (10 cm
on a 16 cm area).
This is normal with some types
of cookware.
This is caused by
the transfer of energy from the
hob to the cookware.
Cooling of the electronic
components.
Working normally.
The cookware used is not suit-
able for use with induction.
Clean the hob or remove
the object and then start
cooking again.
See “fitting” section.
See section on cookware
for induction.
Nothing. There is no risk
to your hob or your cook-
ware.
Nothing.
See section on cookware
for induction.
•While in use
YOU NOTICE THAT: POSSIBLE CAUSES: WHAT YOU SHOULD DO:
YOU NOTICE THAT: POSSIBLE CAUSES:
WHAT YOU SHOULD DO:
An indicator light appears.
Your installation blows a fuse.
Only one side works.
The hob produces an odour dur-
ing the first cooking sessions.
Working normally.
The electrical connection of
your hob is defective.
New appliance.
Nothing, the light disap-
pears after 30 seconds.
Verify the connections.
See the “Electrical
Connection” section.
Nothing. The smell will dis-
appear after a few uses.
EN
5 / AFTER-SALES SERVICE AND CUSTOMER RELATIONS
In the event of breakage, cracks or even light fissures in the vitroceramic glass,
remove the fuses or trip the hob’s circuit breaker, to avoid the risk of electrical
shock.
Contact the After-Sales Service.
FagorBrandt SAS, tenant-manager – SAS with share capital of 20 000 000 euros RCS Nanterre 440 303 196.
In the unlikely event of there being a problem with your appliances please call the number below
quoting the model number of your appliance - this can be found on the rating plate. Our trained
staff are available to advise or book a service call with one of our authorized service agents.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

De Dietrich DTI1048C Owner's manual

Category
Hobs
Type
Owner's manual
This manual is also suitable for

The De Dietrich DTI1048C induction hob offers precise temperature control and rapid heating for your cooking needs. It features four cooking zones with power ranging from 50W to 4600W, allowing you to adjust the heat intensity to suit different cooking techniques. The hob's intuitive touch controls and digital display make it easy to select cooking zones, adjust power levels, and set timers.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI