Lenco Xemio Xemio 254 Quick start guide

Brand: Lenco Xemio

Model: Xemio 254

Type: Quick start guide

This manual is also suitable for

Xemio 244

XEMIO-244 / 254

Quick Guide

For information and support, www.lenco.com

1. Controls and Connections

1. Status LED: For charge / play

2. button: To Play / Pause, On / Off.

3. / button: To increase volume level or the next song.

4. button: For Shuffle On/Off

5. / button: To decrease volume level or the previous song.

6. Memory Card Slot: For external Micro SD Memory Card Input

7. Micro USB: For PC connection and charge function

8. Reset: To reset the unit.

9. Earphone Out Jack: To connect stereo earphone set

10. Clip

2. Charging the battery



Make sure that the computer is turned on. Connect the player to the computer by

using the USB cable. Now the computer will detect and install the driver

automatically. Once the installation is complete, the player will be displayed in

“My Computer” or for MAC users on the desktop.

Note: For Windows 98/98SE the driver needs to be installed first.



Once connected to a computer the player will charge automatically (computer

needs to be turned on). After 2 hours the battery is fully charged. At same time,

the player is ready for media files upload / download with your computer.

3. Downloading the User’s Manual



For consider environment protection, the detailed User Manual is stored on the

player’s flash memory in a folder named “User Manual”. To open it you need to

download it onto your computer, and then you can view it on computer directly.

Note: To open the user manual the computer needs to have a .pdf reader. You can

download a .pdf reader for free via http://get.adobe.com/reader/

This symbol indicates that the relevant electrical product or

battery should not be disposed of as general household waste in

Europe. To ensure the correct waste treatment of the product and

battery, please dispose them in accordance to any applicable

local laws of requirement for disposal of electrical equipment or

batteries. In so doing, you will help to conserve natural resources

and improve standards of environmental protection in treatment and disposal of

electrical waste (Waste Electrical and Electronic Equipment Directive).

Products with the CE marking comply with the EMC

Directive (2004/108/EC) and the Low Voltage Directive

(2006/95/EC) issued by the Commission of the European

Community.

The declaration of conformity may be consulted at

http://www.lenco.eu/supportfiles/CE/fqeiofha89fef.pdf

Lenco Xemio Xemio 254 Quick start guide

Brand: Lenco Xemio

Model: Xemio 254

Type: Quick start guide

This manual is also suitable for

Xemio 244

Download PDF

report

Lenco Xemio Xemio 254 Quick start guide

This manual is also suitable for

Lenco Xemio Xemio 254 Quick start guide

Related papers

Other documents