Hisense 58H6580E Quick start guide
- Category
- LED TVs
- Type
- Quick start guide
2
Packaged Contents
Your package in which you purchased your new TV contains the following items:
2 AAA batteries A left and right leg that forms the TV stand
Quick Start Guide Important Safety Information and Warranty Card
4 screws (M4×25) (43"/65") Remote Control
4 screws (M4×20) (50"/55") Power Cord
IMPORTANT:
To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box.
Required tools and devices
Wireless router (not included) for Internet connectivity
Phillips screwdriver (not included) to secure the TV stand
HDMI and other types of cables (not included) to connect external devices to the TV
Wall mount bracket (not included) if you prefer to mount the TV to the wall
·
Please check foam for accessories before discarding.
·
Veuillez vérifier la mousse pour qu'il n'y ait pas d'accessoires avant de la jeter.
·
Antes de desechar la espuma, asegúrese de retirar todos los accesorios.
3
Buttons and Ports on the TV
Back View of the TV
TV Side View
TV Bottom View
TV Bottom Panel
Power Input
ANT/CABLE
0.5A(MAX)
HDMI 2
(
4K@60Hz
)
HDMI 1
(
4K@60Hz
)
ARC
USB
SERVICE
HDMI 3
(
4K@60Hz
)
AV IN
VIDEO
L
R
4
STEP 1. Attach the TV Stand or Wall Mount Bracket (not included)
Attach the TV Stand (For steps to attach the wall mount see page 5)
CAUTION:
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets.
The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Be sure to protect the
TV screen from getting scratched or damaged by any hard objects. In addition, DO NOT exert pressure on the front of the TV at any
time because it could crack.
To attach the left and right leg that forms the stand:
1. Carefully place your TV face-down on a soft, flat surface to prevent the TV from being damaged or the screen from getting scratched.
2. Remove the 2 legs from the foam and then insert the legs into the bottom slots of the TV.
3. Use the screws that came inside the carton with your TV to secure each leg tightly.
leg
leg
Screws:
M4×25 (43"/65")
M4×20 (50"/55")
Screws:
M4×25 (43"/65")
M4×20 (50"/55")
5
Attach the Wall Mount Bracket (not included)
Before you begin the third-party manufacturer instructions, be
sure to do the following things:
1. Place the TV face down on a clean, safe and cushioned surface.
2. Remove the TV stand if you already attached it.
3. Place the spacers (not included) in the corresponding bracket
holes.
Screw
(not provided)
CAUTION:
• Whenyouattachthemount,besuretousethespacers
(provided by the third-party manufacturer) between the TV
and the bracket.
• TopreventinternaldamagetotheTVandensureitis
mountedsecurely,besure tousefixingscrews(not
provided) that are 8.0-10.0mm(43") / 9.5-11.5mm(50"/55"/65")
in length when measured from the attaching surface of the
mounting hook.
Rear cover of the TV Spacer
Screw
Wall mount bracket
8.0 - 10.0 mm(43")
9.5 - 11.5 mm(50"/55"/65")
Wall mount hole pattern
VESA (mm)
200 × 200 (43"/50")
300 × 200 (55")
400 × 200 (65")
Wall mount screw size (mm) M6
Follow instructions provided with the Wall mount bracket.
To complete the installation, please contact the wall-mount
manufacturer or the retailer from which you purchased the TV.
The selected screws are 8.0-10.0mm(43") / 9.5-
11.5mm(50"/55"/65") in length when measured from the
attaching surface of the rear cover.
NOTE: The diameter and length of the screws differ
depending on the Wall-mount bracket model.
Bracket
(not provided)
Spacer
(not provided)
6
STEP 2. Connect Devices to your TV
Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect
the quality of the picture image and color.
TV label Port Cable External Equipment Brief Description
ANT/CABLE
Antenna
VHF/UHF Antenna
ANT OUT
Connect an outdoor VHF/UHF antenna.
HDMI
DVD Player/Recorder
Set-top Box
Satellite Receiver
Satellite
antenna
cable
VCR
Video
Camera
Connect a High Denition Multimedia Interface
(HDMI) cable from an external device.
AV IN
VIDEO
Yellow
Connect a composite video cable and left-right
audio cables from an external AV device.
L
White
R
Red
DIGITAL AUDIO OUT
SpeakerAudio Amplier
Connect an optical cable from an external
digital audio system.
7
TV label Port Cable External Equipment Brief Description
AUDIO
OUT
Connect headphones to hear audio from the
TV.
Headphones with microphones are not
supported.
Connect an audio adapter (not provided) from
an external analog audio system.
USB
Connect a USB device for browsing photos,
music and movies.
Hard disks with a total current consumption
or impulse current consumption greater than
500mA are not supported.
LAN
LAN
Connect an Ethernet cable to access a network
or the Internet. The TV also has a wireless
connectivity feature.
SERVICE
This port is not available for you to connect an external device. It can only be used by our factory for testing
purposes.
White
Red
Speaker
Audio Amplier
8
STEP 3. Establish a Network Connection
1. Press
the
[
]
button
on the remote control,
press
[
˅
]
button
to select Settings and then press
[
OK
]
to enter the Settings menu
.
2. Select
Network → NetworkConguration
.
TV JACK
Modem Cabl
eL
AN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Establish a wired network connection
Automatically obtain an IP address
1. Select
Wired LAN. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default option of IP Settings Mode is DHCP.
2. If the connection fails then "
Disconnected" will display for the Ethernet status. Retry or enter the IP Settings, select Manual to input
the information again.
Manually enter the IP Settings
1. Select
Manual.
2. Enter the IP Address, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the menu. Next, select
Connect.
9
Establish a wireless network connection
Wireless router with DHCP
LAN Cable
Wireless LAN Adapter
built-in TV set
The TV can directly receive network signals via wireless router
1. Select
Wireless. The list of networks will be displayed automatically.
2. Select a wireless network from the list, input the password and select
Connect.
3. If the network connection does not appear in the list, select
Refresh to refresh the list or select Add to manually enter SSID and
Security mode selection
Close the network connection
Select Off. The network connection will close.
10
Buttons on your TV remote
BUTTON DESCRIPTION
Power on / off
INPUT Change TV input source
Number Enter Channels / input numbers
CC
Turn Closed Captioning On/Off and CC On
When Mute
Dash button / Select a digital sub-channel
(Red / Green /
Yellow / Blue)
Special function buttons
TV Live TV
The button for the Quick setup menu
˄
/
˅
/
˂
/
˃ D-pad (up/down/left/right navigation buttons)
OK Conrmation button
BACK
Return to the previous place in the menu or
app
BUTTON DESCRIPTION
EXIT Exit the application
Display the Home screen
VOL Volume (up/down)
CH Channel (up/down)
Mute and restore sound
MTS Set the audio language(MTS)
/
/
/
/
Media content control function buttons
NRT
Choose to leave the Video description feature
On or Off
APPS All Apps
NOTE: The buttons that appear on your remote may differ
fromthedescriptionsthatwe'veprovidedforcontext.
11
STEP 4. Begin Using your Remote
1. Slide the back cover to open the battery compartment of the
remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and (-)
ends of the batteries with the (+) and ( - ) ends indicated in the
battery compartment.
3. Replace the battery compartment cover.
Important Information about the remote and batteries:
• Discardbatteriesinadesignateddisposalarea.Donot
throw them into a fire.
• Removeoldbatteriesimmediatelytopreventthemfrom
leaking into the battery compartment.
• Ifyoudonotintendtousetheremotecontrolforalong
time,thenremovethebatteries.
• Batterychemicalscancausearash.Ifthebatteriesleak,
clean the battery compartment with a cloth. If chemicals
touch your skin then wash it immediately.
• Donotmixoldandnewbatteries.
• Donotmixalkaline,standard(carbon-zinc)orrechargeable
(NiCd,NiMH,etc.)batteries.
• Donotcontinueusingtheremoteifitgetswarmorhot.
Call our Support Center immediately on the support website.
Insert the batteriesGently push and slide Gently push and slide
Remote Control Range Information
The remote control can work at a distance of up to 26 feet in
front of the TV set.
It can work at a 30 degree horizontal or vertical angle.
Program Your Universal Cable or Satellite Remote
Control to Operate Your New Television (only for
USA)
If you would like to program your other household remote
controls to your new television, please refer to the User's Manual
supplied by your Cable or Satellite provider. The Cable or Satellite
providers' User's Manuals should include instructions on how to
program their remote to your television.
A list of codes for the most common Cable and Satellite providers
are listed below. Use the code that is associated with your Cable
or Satellite provider (if applicable).
DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710,
11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963,
12002, 12183
Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456,
0748, 1463, 0463, 10463
Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660,
10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963,
12002
CoxCommunications
......0178, 10178, 1326, 1463
Dish Network......505, 627, 538, 720, 659
If the code associated with your Cable or Satellite provider is
not listed, does not work or you cannot locate the instructions to
program your remote, call your local Cable or Satellite provider's
customer service center.
12
STEP 5. Power on the TV
Plug the power cord into a power outlet.
Wall Outlet
Power Cord
If your Cable or Satellite provider does not have a code available, please
contact us at one of the phone numbers on Page 1.
UsingYourCableSet-topBoxorSatelliteReceiver
Remote as a ‘Universal’ Remote
If you prefer to use your Cable Set-top Box or Satellite Receiver
Remote as a ‘Universal Remote’, then visit the Support page to
view a list of the codes.
13
Press the Power button on the remote to turn on the TV. A
splash screen that shows the logo appears. Next, the First-Time
Setup Menu begins by prompting you to choose your Language,
Region, and Time Zone.
STEP 6. Complete the First-Time Setup Menu
After the splash screen that shows the logo appears, begin the rst-
time setup menu.
Screen Task
Language and
Location
• Using the D-pad arrows of your remote, choose
your Language, Region and Time Zone.
End User License
Agreement
• Choose
Agree or Decline. If you choose Agree,
then select Continue icon and press
[
OK
]
.
Usage Mode
• Select
Home Mode (which appears by default).
•
Note: ‘Store Mode and Store Mode(Video Demo
Only)’ should only be selected by Retailers who
plan to demonstrate the TV.
Network
Connection
• If your TV does not automatically detect an
Ethernet connection, then use a wireless network.
Select your network from the list that displays,
input the password. Also you can add a hidden
network.
Region
Time Zone
Language
Honduras Alaska
Hawaii
El Salvador
14
STEP 7. Begin to Enjoy your TV
Your Smart TV is easy to use and brag-worthy!
Now that you’ve completed the first-time setup menu, the Home
screen is your starting point for navigating the TV. Gone are
the days where your TV only provides one way for you to be
entertained. This showpiece provides you the convenience
of watching a program on a live channel, accessing Video on
Demand to watch a movie and many other entertainment options.
Using your remote, press the Home button to begin enjoying your
TV.
Disclaimer: Subscriptions or other payments may be required to access content through some applications. Some or all of the included
or downloaded application services in this Hisense device may not function depending on the Internet connection, local limitations of
included applications or other reasons outside of Hisense’s control. HISENSE EXPRESSLY DISCLAIMS RESPONSIBILITY FOR ANY
APPLICATION SERVICE FROM FUNCTIONING AT ANY TIME, FOR CONTENT IN ANY APPLICATION SERVICE, FOR DISRUPTIONS
OF SERVICE, LOCAL OR REGIONAL LIMITATIONS, WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. By purchasing this device, you accept such
Disclaimer without any claim on Hisense at any time.
Screen Task
Product
Registration
•Registering helps keep your product humming
with software updates, product support and our
warranty.
Last step of TV
setup
•You are at the last step of TV setup. If you have
not connected network, you can select ‘Set up
network’ or ‘Use without network’. If you have
connected network,Congratulations! You have
completed TV setup. Start to use.
15
Product Specifications
Model Name
43H8E / 43H8608
43H8020E / 43H8050E
43H8060E / 43H8070E
43H8080E
50H8E / 50H8608
50H8020E / 50H8050E
50H8060E / 50H8070E
50H8080E
55H8E / 55H8608
55H8020E / 55H8050E
55H8060E / 55H8070E
55H8080E
65H8E / 65H8608
65H8020E / 65H8050E
65H8060E / 65H8070E
65H8080E
Dimension
(W × H × D)
Without Stand
38.2 × 22.6 × 2.8 inches
(970 × 573 × 71 mm)
44.4 × 26.0 × 2.9 inches
(1 127 × 661 × 73 mm)
48.9 × 28.6 × 2.9 inches
(1 242 × 726 × 73 mm)
57.5 × 33.3 × 3.0 inches
(1 460 × 847 × 76 mm)
With Stand
38.2 × 24 × 8.4 inches
(970 × 608 × 213 mm)
44.4 × 27.7 × 10.4 inches
(1 127 × 703 × 263 mm)
48.9 × 30.5 × 10.4 inches
(1 242 × 774 × 263 mm)
57.5 × 35.6 × 13.1 inches
(1 460 × 903 × 332 mm)
Weight Without Stand 17.4 lbs (7.9 kg) 25.8 lbs (11.7 kg) 30.9 lbs (14.0 kg) 43.2 lbs (19.6 kg)
With Stand 17.6 lbs (8.0 kg) 26.9 lbs (12.2 kg) 32.0 lbs (14.5 kg) 44.5 lbs (20.2kg)
Active Screen Size (Diagonal) 42.5 inches 49.5 inches 54.6 inches 64.5 inches
Screen Resolution 3 840 × 2 160
Audio Power 7 W + 7 W 10 W + 10 W 10 W + 10 W 15 W + 15 W
Power consumption 100 W 130 W 170 W 205 W
Power Supply 120 V ~ 60 Hz
Picture Quality
Screen resolution: 3 840 x 2 160, UHD Upscaler
HDMI Input
RGB / 60 Hz (640×480, 800×600, 1 024×768), YUV / 60 Hz (480i, 480p, 720p, 1 080i, 1 080p)
3 840x2 160/60Hz, 3 840x2 160/24Hz, 3 840x2 160/25Hz, 3 840x2 160/30Hz
Receiving
systems
Analog NTSC
Digital ATSC / QAM
Ports
3 HDMI ports, 1 USB port, 1 LAN port for Ethernet, 1 Digital Audio Output, 1 RF Input, 1 Earphone Audio Output, 1
RCA Composite Video Input , 1 Left/Right Audio Input for Composite
Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or
otherwise. HDR viewing experience will vary by model, content availability and Internet connection.
16
Quick Problem-Solving Tips
When you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. If
the problem is still not resolved, then contact us at one of the phone numbers on Page 1.
ISSUES POSSIBLE SOLUTIONS
No sound or picture
• Check if the power cord is plugged into a powered AC outlet.
• Press the
Power button
on the remote control to activate the unit from 'Standby' mode.
• Check to see if the LED light is on or not. If it is, then the TV is receiving power.
I have connected an external
source to my TV and I get no
picture and/or sound.
• Check for the correct output connection on the external source and for the correct input connection on the TV.
• Make sure you have made the correct selection for the input mode for the incoming signal.
When I turn on my TV, there is a
delay for a few seconds before the
picture appears. Is this normal?
• Yes, this is normal. The TV is initializing and searching for previous setting information.
The picture is normal but there is
no sound
• Check the volume settings.
• Check if 'Mute' mode is set to
On.
Sound but no picture or black and
white picture
• If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds.
• Check that the Color is set to 50 or higher.
• Try different TV channels.
The sound and/or picture is
distorted or appears wavy
• An electric appliance may be affecting the TV. Turn off any appliances that are nearby and move it farther away
from the TV.
• Insert the power plug of the TV set into another power outlet.
The sound and picture is blurry or
cuts out
• If using an external antenna, check the direction, position and connection of the antenna.
• Adjust the direction of your antenna or reset or ne tune the channel.
A horizontal or vertical stripe
appears on the picture and/or the
picture is shaking
• Check if there is an appliance or electric tool nearby that is causing interference.
The plastic cabinet makes a
"clicking" type of sound
• The 'click' sound can occur when the temperature of the television changes. This change causes the television
cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.
The remote control does not work
• Conrm that TV still has power and is operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
Hisense 58H6580E Quick start guide
- Category
- LED TVs
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI