Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Factory installed stainless steel grab bars
•
Engineered for ease of installation
•
Durable swirl-gloss finish
•
10-year consumer/3-year commercial limited warranty
•
Tongue-and-groove 4-piece modular design allows for
easy ″snap together″ installation
•
1/2″ (13 mm) low profile threshold for easy
wheelchair access
•
63-1/2″ (1613 mm) x 40-5/8″ (1032 mm) x 73-1/4″
(1861 mm) direct-to-stud rough-in, including flange
•
63-1/4″ (1607 mm) x 39-3/8″ (1000 mm) x 72″ (1829
mm) complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ADA
•
ICC/ANSI A117.1
•
HUD, UM Bulletin 73A
•
NAHB Research Foundation, Inc.
•
ASTM E162
•
ASTM E662
•
ANSI Z124.1.2
63″ (1600 mm) ADA COMPLIANT
ROLL-IN SHOWER
62060103
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
62060103 63″ (1600 mm) ADA compliant* shower receptor and wall
surround, with grab bars
❑ 0 ❑ Other_____
*Product is shipped as ADA compliant with factory assembled grabs bars. When properly installed, the complete
installation is ADA compliant. Components are also available separately but are provided only as ADA adaptable.
Page 1 of 2
1016221-4-
G
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Installation Notes
Install this product according to the installation guide.
Drain cutout in subfloor to be 10-1/2″ (267 mm) per rough-in
illustration below to allow the backside of the drain to sit
below the subfloor surface.
Studs should be positioned as shown.
Backer boards and fasteners protrude beyond the back wall
1-1/2″ (38 mm). If installing this product against wall board,
1-1/2″ (38 mm) furring strips installed over the wall board are
recommended. The stud pocket depth of 40-5/8″ (1032 mm)
will need to be increased by the combined thickness of the
wall board and furring strips.
39-3/8"
(1000 mm)
1" (25 mm)
63-3/8" (1610 mm) Min
63-1/2" (1613 mm) Max
31-5/8"
(803 mm)
Ø 3-5/16"
(84 mm)
Drain Hole
Ø 10-1/2"
(267 mm)
Drain Cutout
18-3/4"
(476 mm)
4"
(102 mm)
13"
(330 mm)
8"
(203 mm)
29"
(737 mm)
40-5/8"
(1072 mm) Max
16"
(406 mm)
15-3/4"
(400 mm)
16"
(406 mm)
63-5/16"
(1608 mm)
1-1/4"
(32 mm)
73-9/16"
(1868 mm)
8" (203 mm)
39-3/8"
(1000 mm)
63-1/4"
(1607 mm)
33"
(838 mm)
72"
(1829 mm)
73-1/4"
(1861 mm)
Product Diagram
63″ (1600 mm) ADA COMPLIANT ROLL-IN SHOWER
Page2of2
1016221-4-
G
-
1
-
2
