Important: Assembly Instruction
Parts List
Thank you for choosing our product.
1. Desk Leg Assembly 2. Desk Frame Assembly
6. Fixed Rod Assembly5. Desktop Assembly
4. Desktop Assembly
1. It’s recommended to have two people for the installation, this will
significantly improve your efficiency.
2. Before you begin: lay out all of the parts on a non-abrasive surface to
identify the number tags in the manual and count before assembly. Please
use the screws correctly to avoid popping the desk panel.
3. For a smooth assembly process, we suggest you keep a lite tightness for
all the screws during assembly. After the whole desk is assembled, firmly
tighten all the screws.
Please share your product experience if you are happy with it.
Feel free to contact us on Amazon in case of any problem
regarding assembling or the product itself.
Your satisfaction is our highest pursuit.
x2
x8 x4 x11 x1 x1 x1 x4 x4 x4
x1 x1 x1
x1 x1x2 x1
1
BACK
3
4
BACK
2
F
A B C D
E
1 2 3 4 5 6 7 8 9
F G H
1
7
x 4
7
x 4
1
x 4
1
service@cubiker.com
Down Side
DO NOT use the wrong
screws. The desktop can only
be fixed with silver screws ②!
Before fixing the desktop
Please reduce the desktop gap
3. Storage Cube Assembly
8
6
Attention :
When you open the cover (G)
DO NOT over-rotating
the cover.
3
3
9
3
The concave parts fixed
by superimposed
H
x 4
9
x 4
3
x 1
3
x 4
2
x 1
4
x 5
3
x 4
8
x 1
3
C
B
D
F
A
G
G
E
Note: The desktop can only be fixed with silver screws ②!Please ensure using the correct screws for assembling.
3
!
!